We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
utilisé
N° Inv. : 7323 Modèle : BUAJ 30 Producteur : Junker Création : 1999 Paramètres: Dimensions de la table : 1380x160 mm Distance entre les pointes : 630 mm Poids de la machine : 2800 kg
utilisé
Vente préalable réservée - erreurs possibles Numéro de référence interne : D-1143-3
utilisé
Flexible high-performance grinding machine JUROBOT handling-cell (FANUC M-10iA): Z-axis/grinding length: 500mm max., orbital diameter: 150mm max., workpiece weight: 15kg max., grinding wheel diameter: 350mm max., operating hours: 23219h, with documentation, an on-site inspection is possible.
utilisé
Flexible high-performance grinding machine with JUROBOT handling-cell (FANUC M-10iA): Z-axis/grinding length: 500mm max., orbital diameter: 150mm max., workpiece weight: 15kg max., grinding wheel diameter: 350mm max., operating hours: 12238h, with documentation, an on-site inspection is possible.
utilisé
turning speeds: - U/min frequency: - Hz output: - kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
utilisé
weight of the machine ca.:24 t dimensions of the machine ca.:3900 x 3500 x 2500 m -the machine has no B axis -two grinding spindles with one grinding wheel each - The transport instructions can be found in the documentation (attachment). including Hoffmann KSM filter system Loading list available Operating data v. 03/27/2023: Operating time: 21727 h / production time: 11960 h Machine documentation: 1 set of circuit diagrams, electrical plans, operating instructions Accessories: 2 replacement measuring heads Marposs S/500; prism supports Other: Hoffmann KSM filter system Machine condition: according to age, due to processing with emulsion
utilisé
The machine is in good technical condition, can be tested under power. Parameters: 630 mm, 300 mm Location: Czech Republic
utilisé
Description: machine number: 3299 control: SIEMENS Sinumerik  , max. grinding length: 800 mm max. clamping length: 800 mm max. center height: 150 mm max. workpieve weight: 80 kg  , max. grinding wheel diameter: 400 mm max. grinding wheel width: 63 ,mm bore of the grinding wheel: 127 mm motor power: 7.5 kW rotational speed of the wheel: 45 m/s adjustment travel: 350 mm  , workpiece headstock: spindle taper: MK5 spindle speed: 0 - 1000 rpm swivel angle: 90°  , tailstock: taper: MK4 quill stroke: 90 mm  , including: ASTOS FS100 Filtration Station, YOM 2005, serial number: 0511 AKTIVIT loading/transportation/conveyor system  , please also have a look at the PDF documents of this machine grinding length: 800 mm, control: SIEMENS Sinumerik, weight approx.: 11,000 kg, Approx. Onsite Dimension. (l x w x h): 6,000 x 3,000 x 3,5 ...
utilisé
Description: machine number: 3388 control: SIEMENS Sinumerik  , max. grinding length: 800 mm max. clamping length: 800 mm max. center height: 150 mm max. workpieve weight: 80 kg  , max. grinding wheel diameter: 400 mm max. grinding wheel width: 63 ,mm bore of the grinding wheel: 127 mm motor power: 7.5 kW rotational speed of the wheel: 45 m/s adjustment travel: 350 mm  , workpiece headstock: spindle taper: MK5 spindle speed: 0 - 1000 rpm swivel angle: 90°  , tailstock: taper: MK4 quill stroke: 90 mm  , including: ASTOS FS100 Filtration Station, YOM 2007, serial number: 07650232 AKTIVIT loading/transportation/conveyor system  , please also have a look at the video and the ,PDF documents of this machine grinding length: 800 mm, control: SIEMENS Sinumerik, weight approx.: 11,000 kg, Approx. Onsite Dimension. (l x w x ...
utilisé
Description: serial number: 3075 control: SIEMENS Sinumerik  , grinding diameter: 300 mm grinding length: 600 mm centre height: 150 mm  , max. grinding disc diameter: 400 mm max. grinding disc width: 63 mm grinding disc bore: 127 mm motor power: 5.5 kW grinding disc speed: 45 m/s adjustment travel of the sanding spindle carriage: 300 mm swivelling: +45° / -15°  , travelling distance: X-axis: 160 mm Z-axis: 756 mm  , workpiece headstock: taper: MK5 spindle speed: 23 - 291 rpm swivelling: 90°  , tailstock: taper: MK4 quill stroke: 30 mm  , feed speed: 0 - 7.5 m/min.  , connected load: 60 kVA ,  , please also have a look at the PDF documents of this machine grinding diameter: 300 mm, grinding length: 600 mm, control: SIEMENS Sinumerik 840D, weight approx.: 8,000 kg, Approx. Onsite Dimension. (l x w x h): 4,500 ...
utilisé
Description: machine number: 3384 control: SIEMENS Sinumerik  , max. grinding length: 800 mm max. clamping length: 800 mm max. center height: 150 mm max. workpieve weight: 80 kg  , max. grinding wheel diameter: 400 mm max. grinding wheel width: 63 ,mm bore of the grinding wheel: 127 mm motor power: 7.5 kW rotational speed of the wheel: 45 m/s adjustment travel: 350 mm  , workpiece headstock: spindle taper: MK5 spindle speed: 0 - 1000 rpm swivel angle: 90°  , tailstock: taper: MK4 quill stroke: 90 mm  , including: ASTOS FS100 Filtration Station, YOM 2007, serial number: 07650232 ASTOS MS 100-P Magnetic Separator, YOM 2012, ,max. flow rate: 100 l/min AKTIVIT loading/transportation/conveyor system  , please also have a look at the PDF documents of this machine grinding diameter: 400 mm, grinding length: 800 mm, contr ...
utilisé
Description: machine number: 3264 control: SIEMENS Sinumerik  , max. grinding length: 800 mm max. clamping length: 800 mm max. center height: 150 mm max. workpieve weight: 80 kg  , max. grinding wheel diameter: 400 mm max. grinding wheel width: 63 ,mm bore of the grinding wheel: 127 mm motor power: 7.5 kW rotational speed of the wheel: 45 m/s adjustment travel: 350 mm  , workpiece headstock: spindle taper: MK5 spindle speed: 0 - 1000 rpm swivel angle: 90°  , tailstock: taper: MK4 quill stroke: 90 mm  , including: AKTIVIT loading/transportation/conveyor system  , please also have a look at the PDF documents of this machine grinding length: 800 mm, control: SIEMENS Sinumerik, weight approx.: 11,000 kg, Approx. Onsite Dimension. (l x w x h): 5,500 x 3,500 x 3,500 mm
utilisé
JUNKER EJ 50 grinding machine Year 2007 55kva 400V 50Hz
utilisé
Dot height: 150mm, Distance between points: 1000mm, Grinding wheel dimensions (od x id x width): Ø400xØ127x50mm, Internal grinding head: 4 units, Centre height: 150mm, Max. workpiece weight: 80Kg, X-axis travel (transverse): 350mm, X-axis speed: 10 meters per minute, Z-axis travel (longitudinal): 1000mm, Z-axis speed: 12 meters per minute, Z-axis resolution: 0.00004, B-axis swivel range: 210°, B-axis resolution: 0.0001°, Drive capacity: 10 HP, Grinding wheel diameter: 400mm, Max. width Grinding wheel width: 63mm, Spindle speed range: 0-1000 RPM, Spindle swivel range: 0° - 90°, Tailstock stroke: 30mm, Equipped with: Fanuc 21i-TB CNC Control, Dimensions: 3350x 2130x 2130, Weight: 4535Kg, Accesories: Steady rests, magnetic plate, 3-jaw chuck, balancer, sensitron 6, coolant with paper and magnetic filter, fume extractor, etc.
utilisé
The diameter of the ground workpiece for internal grinding is 8 - 190 mm. External grinding: - center distance 640 mm - workpiece diameter 295 mm Total machine input 35kVA. The machine is functional, but needs an initial investment in repairs.
utilisé
Mold heating, fan heaters, heating, gas heating, construction heating, construction dryers, heating, hall heating, gas heating for casting molds, foundry technology -Manufacturer: Junker, gas heating WA 26532 on a mobile transport frame -Burner: Wiedemann B202 H2-3 175 kW -Blower: Spelleken 5.5 kW volume flow 500 m³/h -Individual components/accessories: see photos -Dimensions 1500/1250/H2010 mm -Weight 625 kg