sous-catégories
(troisième niveau de catégorie)
Fabricant:
(Catégorie: 109)
diameter: 20 - 100 mmworkpiece length: 3000 - 12000 mmnumber of rolls: 2 Control: Siemens SPS/PLC Tensile Strength: 70 kg/mm²feed speeds: 60 m/minAngle: 10 - 22 °main drive motor: 132 kWroll speed: 180 U/mintotal power requirement: - kWweight of the machine ca.: 24,5 tdimensions of the machine ca.: 7500 x 3000 x 2850 mMachine was retrofitted (Eletric) and not much used2 roller straightening machine, fully hydraulic and equipped with:- Siemens PLC/SPS control system- Hydraulic roller- Loading table with chain transport- Infeed channel with pressure roller- Pressure rollers- Gearboxes and motors- Siemens Sinamics drives- New electrical system- Hydraulic units- Spare set of rollers- Machine with complete hydraulic adjustment-- Upstroke of upper Roll: 210mm-- Hydraulic cap Stroke: 13mm-- Side Guides and Scrapers set at Exit: 20+35mm 35+65mm ...
CNC lathe Type: ST-20 Y Manufacturer: Haas Year: 2023 Control: Haas Max.turning diameter: 298 mm Max.turning length: 572 mm Swing over support: 533 mm X: 213 mm Z: 572 mm C-axis Y-axis: +/- 50.8 mm Driven tools Tailstock Tool probe X/Y/Z axis rapid traverse - 24.0/12.7/24.0 m/min Spindle cone: A2-6 Max. power: 14.9 kW, spindle drive Vector Drive Max. torque: 203 Nm Max. spindle speed: 4000 rpm Spindle bore: 63.5 mm Automatic hydraulic chuck: 210 mm Turret MBT65 : 12 position Max. speed of driven tools: 4000 rpm Drive of all positions of the BMT65 turret Coolant tank: 208 l with pump El. connection 3x400V/50HZ, 14kVA Machine weight: 5300 kg Linear rollers pre-tensioned axis guide Central automatic lubrication - axes with grease / spindle with oil Lighting of the working space Automatic hydraulic 3-jaw chuck A set of tool holders (only for BOT or HYBRID revo ...
Fabricant : Haas Modèle : ST-20Y Année de fabrication : 2016 Tension : 400V Phase : 3 Fréquence (Hertz) : 50/60 Hz Courant à pleine charge : 27 ampères Courant de charge le plus élevé : 18 ampères Capacité de coupure de court-circuit : 10 000 ampères Schéma de câblage Référence : 96-0284 Courant nominal de court-circuit : 5 000 ampères RMS symétrique Pour en savoir plus, cliquez ici - / Contactez-nous au -
Fabricant : LINEMATIC Modèle : LM34/725 Année de fabrication : 2005 Puissance requise : 17 kW Tension (VOLTS) : 400 V Courant (ampères) : 24 A Fréquence (FREQ) : 50 Hz Phase (PHASE) : 3P + N + PE (triphasé avec terre neutre et protectrice) Marquage Pour en savoir plus, cliquez ici - / Contactez-nous au -
Fabrication : Linematic Modèle : LM34/949 Année de fabrication : 2015 Puissance requise : 12 kW Tension : 400 V Courant : 16 A Fréquence : 50 Hz Phase : 3P + N + PE Certification : CE Pour en savoir plus, cliquez ici - / Contactez-nous au -
Fabricant : LINEMATIC Modèle : LM34/882 Année de fabrication : 2012 Puissance requise : 28 kW Tension : 400 V Courant : 40 A Fréquence : 50 Hz Phase : 3P + N + PE Certification : CE Pour en savoir plus, cliquez ici - / Contactez-nous au -
Fabricant : Index Modèle :MS 25 M Année de fabrication : 1990 Type de machine : Tour, 6 broches - Axe principal : 25 mm - Entraînement : Mécanique - Caractéristiques et équipement : - Chargeur de barres (IEMCA) - Changeur de palettes - Convoyeur de copeaux - Outils entraînés - Accessoires supplémentaires inclus État : Utilisé, en bon état de fonctionnement. Pour en savoir plus, cliquez ici - / Contactez-nous au -
Type de machine : Système de refroidissement Modèle : HA 500 / 100 – AF Année de fabrication : 2015 Débit : 500 l/min Technique : Huile de coupe Matériau de travail : Aluminium Tension principale : 400 V / 50 Hz Tension de commande : 24 V DC Puissance totale : 44,1 kW Consommation de courant : 81,4 A Poids à vide : 1 350 kg Pour en savoir plus, cliquez ici - / Contactez-nous au -
Fabricant : Bär Type de machine : Système de nettoyage du liquide de refroidissement Année de fabrication : 2015 Tension d’alimentation : 3L/ N/ PE 400 VAC / 50 Hz Tension de commande : 24 V DC Puissance de raccordement : 185 kW / 350 A Max. Protection par fusible : 400 A Section minimale du câble : 240 mm² Pour en savoir plus, cliquez ici - / Contactez-nous au -
x-travel: 200 mmy-travel: 60 mmz-travel: 500 mmspeed of measurment: 0,02 - 20 mm/s0: X = 0,05 µm 0: Z = 1 µm mgtraversing speed: X = 0 - 80 mm/sbase plate: 600 x 450 mmweight of the machine ca.: 164 kgdimensions of the machine ca.: 766 x 482 x 1166 mmCE signed: Contracer contour measuring device, high-performance measuring system for automatic series measurement with motorized Z-column on granite plate. Straightness guidance of the X-axis via ceramic and automatic raising and lowering of the probe tip. Measuring range Z1 - axis = 60 mm. Table, screen and PC. The software can measure, evaluate and document.Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 5500 mmy-travel: 3000 mmz-travel: 1500 mmtable-size: 3000x5000 mmtable load: 15 t/m2taper ISO: ISO50 spindle turning speed range: 10-3000 U/minengine output: 17,5 kWControl: FidiaM20 Spindle power: 22 tool magazin:: 24 Rotating speeds: 600-24000 U/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Measuring range: 1.000 mmerror limit 20°C +/- 1°C: 3 + L(mm) / 300 µmrepeatability: 2sec: 2 µmResolution: 0,01 / 0,001 mmadjustment speed: max. man. 1 m/sPower: 0,7 - 1,6 Ntemperature: +10 .. +40 °Ctotal power requirement: 15 Wweight of the machine ca.: 15,0 kgdimensions of the machine ca.: 0,4 x 0,4 x 1,30 mDocuments: Transmission: RS 232 Height Measuring DeviceTRIMOS - V 1002+- Application area: 1.235mm- Max. angularity deviation: 12µm- Autonomy with air cushion: 30h- Autonomy without air cushion: 100hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Fabricant : TRUMPF Modèle : TruLaser 5030 Classic Année de fabrication : 2007 Puissance laser : 5000 W Heures de fonctionnement : 55 874 h (dont seulement 23 565 h pour la coupe) Mode de fonctionnement : fonctionnement exclusivement en une seule équipe Maintenance : effectuée régulièrement et exclusivement par Trumpf Équipement : comprend 2 palettes interchangeables Spécifications électriques : - Alimentation : 400 V / 50 Hz - Charge de raccordement : 105 kVA - Tension de commande : 24 V - Protection par fusible requise : 3 × 160 A Exigences d’approvisionnement en gaz : - Air comprimé : 7 à 10 bar - Azote (N₂) : 30 bar - Oxygène (O₂) : 20 bar Pour en savoir plus, cliquez ici - / Contact
x-Travel : 1600 mMy-Travel : 4000 mmZ-Travel : 1200 mmPoids de la pièce : 3500 kgLes données de cette annonce ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
2 Sigma value:: +/-0,18 µmserial number: 1018 pin size: 50 mmMesstaster Hexagon Manufacturing intelligencem&h RWP 20.50-M #101810 Nm max.7Lbf.ft. max.The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of saleapply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Les données de cette annonce ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
x-travel: 5.000 mmy-travel: 3.100 mmz-travel: 1.200 mmControl: HEIDENHAIN TCN 530 HSCI table surface area: 5.000 x 2.000 mmT-slots: 11 T - slots - width: 22 mmtable weight: 30.000 Kgrapid traverse X-axis: 20.000 mm/minrapid motion - y-axis: 30.000 mm/minnumber of spindle speeds: 6.000 U/min/rpmSpindle power: 32 kWtaper ISO: Kegel ISO 50 Tools changer: distance between columns: 2.800 mmInternal cooling system: 20 bartotal power requirement: kWweight of the machine ca.: 65 tdimensions of the machine ca.: 15.100x6.200x6.250 mmHead UAD II positioning 0.1º / 0. 1ºSpeed ranges 2Tool clamping HydraulicHead 2 – Vertical mandrilATC positions 302 longitudinal chip conveyors1 cross chip conveyorPortable handwheelLaser tool presetterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 500 mmwidth: 490 mmheight: 75 mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mMagnetic clamping plate electric with cable and 1 box of magnetic prismsThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 975 mmwidth: 410 mmheight: 75 mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mMagnetic clamping plate electric with cableThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
