sous-catégories
(troisième niveau de catégorie)
Fabricant:
(Catégorie: 109)
x-travel: 5500 mmy-travel: 3000 mmz-travel: 1500 mmtable-size: 3000x5000 mmtable load: 15 t/m2taper ISO: ISO50 spindle turning speed range: 10-3000 U/minengine output: 17,5 kWControl: FidiaM20 Spindle power: 22 tool magazin:: 24 Rotating speeds: 600-24000 U/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Measuring range: 1.000 mmerror limit 20°C +/- 1°C: 3 + L(mm) / 300 µmrepeatability: 2sec: 2 µmResolution: 0,01 / 0,001 mmadjustment speed: max. man. 1 m/sPower: 0,7 - 1,6 Ntemperature: +10 .. +40 °Ctotal power requirement: 15 Wweight of the machine ca.: 15,0 kgdimensions of the machine ca.: 0,4 x 0,4 x 1,30 mDocuments: Transmission: RS 232 Height Measuring DeviceTRIMOS - V 1002+- Application area: 1.235mm- Max. angularity deviation: 12µm- Autonomy with air cushion: 30h- Autonomy without air cushion: 100hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Fabricant : TRUMPF Modèle : TruLaser 5030 Classic Année de fabrication : 2007 Puissance laser : 5000 W Heures de fonctionnement : 55 874 h (dont seulement 23 565 h pour la coupe) Mode de fonctionnement : fonctionnement exclusivement en une seule équipe Maintenance : effectuée régulièrement et exclusivement par Trumpf Équipement : comprend 2 palettes interchangeables Spécifications électriques : - Alimentation : 400 V / 50 Hz - Charge de raccordement : 105 kVA - Tension de commande : 24 V - Protection par fusible requise : 3 × 160 A Exigences d’approvisionnement en gaz : - Air comprimé : 7 à 10 bar - Azote (N₂) : 30 bar - Oxygène (O₂) : 20 bar Pour en savoir plus, cliquez ici - / Contact
x-Travel : 1600 mMy-Travel : 4000 mmZ-Travel : 1200 mmPoids de la pièce : 3500 kgLes données de cette annonce ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
2 Sigma value:: +/-0,18 µmserial number: 1018 pin size: 50 mmMesstaster Hexagon Manufacturing intelligencem&h RWP 20.50-M #101810 Nm max.7Lbf.ft. max.The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of saleapply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Les données de cette annonce ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
x-travel: 5.000 mmy-travel: 3.100 mmz-travel: 1.200 mmControl: HEIDENHAIN TCN 530 HSCI table surface area: 5.000 x 2.000 mmT-slots: 11 T - slots - width: 22 mmtable weight: 30.000 Kgrapid traverse X-axis: 20.000 mm/minrapid motion - y-axis: 30.000 mm/minnumber of spindle speeds: 6.000 U/min/rpmSpindle power: 32 kWtaper ISO: Kegel ISO 50 Tools changer: distance between columns: 2.800 mmInternal cooling system: 20 bartotal power requirement: kWweight of the machine ca.: 65 tdimensions of the machine ca.: 15.100x6.200x6.250 mmHead UAD II positioning 0.1º / 0. 1ºSpeed ranges 2Tool clamping HydraulicHead 2 – Vertical mandrilATC positions 302 longitudinal chip conveyors1 cross chip conveyorPortable handwheelLaser tool presetterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 500 mmwidth: 490 mmheight: 75 mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mMagnetic clamping plate electric with cable and 1 box of magnetic prismsThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 975 mmwidth: 410 mmheight: 75 mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mMagnetic clamping plate electric with cableThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 975 mmwidth: 410 mmheight: 75 mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mMagnetic clamping plate electric with cableThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 800 mmwidth: 500 mmheight: 75 mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mMagnetic clamping plate electric with cableThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 800 mmwidth: 500 mmheight: 75 mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mMagnetic clamping plate electric with cableThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter: 290 mmNumber:: 095418 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 975 mmwidth: 405 mmheight: 75 mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mMagnetic clamping plate electric with cableThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 980 mmwidth: 330 mmheight: 100 mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mMagnetic clamping plate electric with cableThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 975 mmwidth: 405 mmheight: 75 mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mMagnetic clamping plate electric with cableThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tour CNC Type : Tornade T 220 M Fabricant : Colchester Année : 2002 Contrôle : Fanuc Series 21i-T Outils entraînés Alésage de la broche : 65 mm Ravitailleur de barres : Tornado MBF 1000 Tête de revolver Sauter Nouveau vérin de serrage hydraulique Roem Poupée mobile après révision complète Nouveaux roulements d’axe en 2022 Porte-outils Machine en bon état, sous tension. Pour en savoir plus, cliquez ici - / Contactez-nous au -
length: 500 mmwidth: 500 mmheight: 110 mmbase area: . mmtotal power requirement: . kWweight of the machine ca.: . kgdimensions of the machine ca.: . mMagnetic clamping plate electric with cableand 1 box of magnetic prismsThe technical data are manufacturer or operator specifications and are therefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines, or your business, then get in touch with us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...
length: 500 mmwidth: 500 mmheight: 110 mmbase area: . mmtotal power requirement: . kWweight of the machine ca.: . kgdimensions of the machine ca.: . mMagnetic clamping plate electric with cableThe technical data are manufacturer or operator specifications and are therefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines, or your business, then get in touch with us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 500 mmwidth: 500 mmheight: 110 mmbase area: . mmtotal power requirement: . kWweight of the machine ca.: . kgdimensions of the machine ca.: . mMagnetic clamping plate electric with cableThe technical data are manufacturer or operator specifications and are therefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines, or your business, then get in touch with us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
