Microbrasserie – Brewiks 500 L, 760 L/brassage, 5 000 L/mois – 2017 Il s’agit d’une microbrasserie complète à deux vases, installée en 2017, équipée de tous les composants essentiels pour le brassage, la fermentation et l’emballage de la bière dans des bouteilles en verre. Il est idéal pour la production à petite et moyenne échelle. L’unité principale est un système Brewiks 500 L à deux vases, composé de deux tuns multifonctions : • Mash Tun / Chaudière / Pasteuriseur • Lauter Tun / Sparging / Tourbillon Les deux récipients ont été modifiés par Mithreum, notamment avec l’ajout d’une bouche d’égout pour faciliter l’enlèvement du grain usé. ...

Overview  This complete brewhouse and cellar system was manufactured between 2018 and 2021 by several European equipment suppliers including Brewiks, Milan Svoboda, Mercabrewers, Wild Goose, Quantor and others. It features a 5 HL Brewiks brewhouse, a 12 HL fermentation cellar (6 CCTs), CIP stations, a canning line, labelling and coding units, water treatment, air treatment, chiller and full malt-handling equipment, being a turnkey solution for beer production. Technical data  Brewhouse (Brewiks 500, 2018) Capacity: 5 HL Heating: Electric, 36 kW Fermentation Cellar (Svoboda + Mercabrewers, 2018–2021) 6 CCTs × 12 HL useful capacity Pressure rating: 3 bar CIP Stations (Svoboda CIP 100) 2 m ...

Overview This microbrewery had to cease operations in recently. The original plan was to continue operations, but as this did not happen for various reasons, the entire equipment is now being sold as a whole. Equipment Steam generator with gasoil burner and its tank. Three-phase mill for grain grinding. 800-liter brewhouse with steam jacket consisting of boiler, filter tank, lung, liquor tank, tubular cooler, accumulated osmotized water tank, and 3 necessary pumps for its operation. Industrial osmosis and descaling equipment. 4 atmospheric cylindrical-conical fermenters with refrigeration jacket and a capacity of 1000 liters. 3 atmospheric cylindrical-conical fermenters with refrigeration ja ...

The Brewiks 500 is a two-vessel microbrewery system operating on a plug-and-brew principle. It consists of a mash tun and a lauter tun, both on wheels, which together function as mash tun, filter tun, boiler, and whirlpool. Average output is up to 580 litres of high gravity wort per 6-hour brew cycle. Construction and Certification - The system is manufactured from quality stainless steel AISI 304/316 and carries a CE certificate. - Both vessels are stone wool insulated and mounted on stands with wheels for easy repositioning. Mash Tun - Included Equipment - 7-inch touchscreen controller - Electrical installation with 40 kW electrical heaters - Hygienic pump - Water heating system - Hea ...

avec la nouvelle laine de verre Moteur re-stocké Puissance maximale de 300 kW avec la nouvelle laine de verre nouvelle grille de grille Moteur re-stocké Puissance maximale de 300 kW la chaudière est révisée  ...

• plus d'information

Schneidmühle Fabricant : NOUVEAU HERBOLD Année de construction: 2001 Commande : 7,5 kW pour le broyage de feuilles: optionnel de type EB 290 (commande 0,75 kW)  ...

• plus d'information

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: milling machine table T-slot table -Table surface: 300 x 300 mm -Y-axis: 50 mm movable, rotary wheel with fine adjustment, see photos -T grooves: groove width 12 mm, groove spacing 80 mm -Total dimensions: 420/330/H90 mm -Weight: 48 kg

Vernier caliper, caliper, vernier caliper -Manufacturer: Holex, Digital Caliper -Item No.: 41 2811 300 -Measuring range: 0-300 mm -Measurement accuracy: 0.01 mm Quantity: 1 piece available -Case dimensions: 465/180/H30 mm -Weight: 1.0 kg ...

• plus d'information

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck, faceplate, faceplate chuck, facing lathe chuck -Manufacturer: SAN OU, K72 series four-jaw faceplate chuck type D Ø 300 mm -Passage: Ø 95 mm -Bolt circle: Ø 135 mm -Mounting: Mounting: Short taper 6 / cone 103 - 106 mm short taper flange with Camlock fastening -Dimensions: Ø300 x 190 mm -Weight: 40 kg

Pressing pliers, crimping pliers, cable lug pliers, mechanical crimping pliers, pressing jaws, pressing tool for cable end sleeves, wire end sleeves, cable lugs, hand pressing pliers, cable cutters, cable shears, hydraulic cable cutters -Manufacturer: VEB WMW, Hydraulic cable cutter with built-in hand pump -Type: PT 300 08 300 -Passage: 45 x 27 mm -Dimensions: 710/130/H115 mm -Weight: 9.7 kg