Fabricant:
(Catégorie: 209)
Panel saw Type: F45 ElmoDrive Manufacturer: Altendorf Year: 2022 Basic equipment: Sliding table 3400 mm CNC-controlled parallel fence, electromotor-adjustable 0–1300 mm Mitre fence extendable up to 3200 mm Main motor power 5.5 kW / speeds 3000/4000/5000 rpm Max. blade diameter: 500 mm Max. cutting length: 3300 mm ELMO DRIVE control system 12” touch display with keyboard Up to 9,999 programs Automatic dimension correction when cutting at angles Extended tool management (up to 100 stored tools) Functions: grooving, angle cutting, geometric shape calculations, calculator, USB interface, machine diagnostics Automatic calculations for angled and bevel cuts Simple, intuitive interface with quick access to functions Machine equipment: Increased main motor power to 5.5 kW CNC parallel fence – cutting width 1300 mm Extension of the sliding table to 3400 mm DIGIT L an ...
Edge banding machine Type: KDF 220 Manufacturer: Brandt Year: 2012 Machine in good condition, fully functional, under power, current after major service. Find more here - .ucymachines/ Contact us at - sales@ucymachines
- Écran oscillant avec 3 sols de tapisserie indépendants pour trier les copeaux de bois et les copeaux. - Équipé de maillages interchangeables, conçu pour la classification des puces utilisées dans la couche interne du carton compressé, équipé de mailles en poudre de 10x10 mm - 2,20 - 0,36. - Puissance totale installée : 15 KW. - 2 entrées à puce d’un diamètre de 650 mm. - 3 + 3 rabots tamisés d’une surface totale de tamisage de 78 m². - Sorties à puces : 3 d’un diamètre de 650 mm et une de 500 mm de diamètre. - Distance longitudinale entre les supports : 3730 mm. - Distance transversale entre les supports 3940 mm. - Conditions de fonctionnement de cette machine : non vérifiées. - VENTE EX-WORKS. Démontage, déconnexion, chargement et retrait aux frais de l’acheteur, qui doit se conformer à la réglementation actuelle sur la prévention des risques ...
- Moulin centrifuge à viruter avec anneau de couteau pour la fabrication de copeaux plats. - Puissance du moteur principal 315 kW. - Puissance de la centrale hydraulique : 2,60 KW. - Vitesse de rotation du rotor : 1107 tr/min. - Diamètre du rotor 1393 mm. - Nombre de lames : 54. - Longueur de lame : 690 mm. - Production maximale jusqu’à environ 20 000 kg/h (selon le type de bois, l’humidité et l’épaisseur des copeaux). - Strip-teaseuse. - Conditions de fonctionnement de cette machine : non vérifiées. - VENTE EX-WORKS. Démontage, déconnexion, chargement et retrait aux frais de l’acheteur, qui doit se conformer à la réglementation actuelle sur la prévention des risques professionnels, la santé et la sécurité dans les travaux industriels, en fournissant la documentation, l’assurance et les accréditations nécessaires. Auction-ID: A7-49881-9
- Moulin à anneaux de couteau pour la fabrication de copeaux plats. - Moteur à roue de percussion de puissance 250 KW. - Puissance du moteur à anneau de pale 25 KW. - Vitesse de rotation de la roue de percussion 850 tr/min. - Diamètre du cercle de coupe 1200 mm. - Nombre de lames : 49. - Longueur de lame : 450 mm. - Production maximale jusqu’à environ 10 000 kg/h (selon le type de bois, l’humidité et l’épaisseur des copeaux). - Strip-teaseuse. - Conditions de fonctionnement de cette machine : non vérifiées. - VENTE EX-WORKS. Démontage, déconnexion, chargement et retrait aux frais de l’acheteur, qui doit se conformer à la réglementation actuelle sur la prévention des risques professionnels, la santé et la sécurité dans les travaux industriels, en fournissant la documentation, l’assurance et les accréditations nécessaires. Auction-ID: A7-49881-7
- Moulin à anneaux de couteau pour la fabrication de copeaux plats. - Moteur à roue de percussion de puissance 250 KW. - Puissance du moteur à anneau de pale : 22 KW. - Vitesse de rotation de la roue de percussion 850 tr/min. - Diamètre du cercle de coupe 1200 mm. - Nombre de lames : 49. - Longueur de lame : 450 mm. - Production maximale jusqu’à environ 10 000 kg/h (selon le type de bois, l’humidité et l’épaisseur des copeaux). - Strip-teaseuse. - Conditions de fonctionnement de cette machine : non vérifiées. - VENTE EX-WORKS. Démontage, déconnexion, chargement et retrait aux frais de l’acheteur, qui doit se conformer à la réglementation actuelle sur la prévention des risques professionnels, la santé et la sécurité dans les travaux industriels, en fournissant la documentation, l’assurance et les accréditations nécessaires. Auction-ID: A7-49881-6
- Moulin à double jet pour la production de copeaux de bois fins avec éléments de meulage internes segmentés. - Puissance du moteur principal 315 kW. - Équipé du système PALLMANN CLEANOMAT (installé selon la documentation en 2009). - Strip-teaseuse. - La trémie supérieure avec système vibratoire et l’aimant ne sont PAS inclus (marqués d’une croix sur la photo n° 4). - Conditions de fonctionnement de cette machine : non vérifiées. - VENTE EX-WORKS. Démontage, déconnexion, chargement et retrait aux frais de l’acheteur, qui doit se conformer à la réglementation actuelle sur la prévention des risques professionnels, la santé et la sécurité dans les travaux industriels, en fournissant la documentation, l’assurance et les accréditations nécessaires. Auction-ID: A7-49881-14
- Mise à jour en 2002. - Puissance électrique totale installée : environ 200 KW. - Capacité 10000 kg/h (atro) - Évaporation de l’eau 9700 kg/h. - Humidité initiale à 100 % (atro). - Humidité finale 3 % ±1 % (atro). - Température d’entrée de gaz 520 °C. - Température de sortie du gaz 130 °C. - Température de sortie de la puce d’environ 60 °C (à température ambiante de 10 °C). - Consommation totale d’énergie thermique d’environ 8 670 000 kcal/h. - Pression maximale autorisée : 26 mbr. - Comprend : • Générateur à air chaud. • Brûleur de fioul : consommation maximale de 600 kg/h. • Brûleur à poussière. • Chambre de mélange. • Séchoir à tambour rotatif : diamètre environ 4000 mm, longueur environ 12000 mm. • 4 cyclones pour la séparation du matériau sec de l’air de procédé. • Vent ...
- Mise à jour en 2002. - Puissance électrique totale installée : environ 180 KW. - Capacité : 8500 kg/h (atro) - Évaporation de l’eau 8500 kg/h. - Humidité initiale à 100 % (atro). - Humidité finale 3 % ±1 % (atro). - Température d’entrée de gaz 550 °C. - Température de sortie du gaz 120 °C. - Consommation totale d’énergie thermique : environ 7 800 000 kcal/h. - Pression maximale autorisée : 26 mbr. - Comprend : • Générateur à air chaud. • Brûleur de fioul : consommation maximale de 600 kg/h. • Brûleur à poussière. • Chambre de mélange. • Sèche-linge rotatif : diamètre environ 3600 mm, longueur environ 11000 mm. • 2 cyclones pour la séparation du matériau sec de l’air de procédé. • Ventilateurs et tuyaux. • Structures de soutien avec escaliers et passerelles pour inspection et e ...
- Écran oscillant avec 2 sols de tapisserie indépendants pour trier les copeaux de bois et les copeaux. - Équipé de maillages interchangeables, conçu pour la classification des puces fines utilisées dans les couches externes du carton compressé, équipé de maillages 10x10 mm - 2,20 - 2,28 - 0,21. - Conditions de fonctionnement de cette machine : non vérifiées. - VENTE EX-WORKS. Démontage, déconnexion, chargement et retrait aux frais de l’acheteur, qui doit se conformer à la réglementation actuelle sur la prévention des risques professionnels, la santé et la sécurité dans les travaux industriels, en fournissant la documentation, l’assurance et les accréditations nécessaires. Auction-ID: A7-49881-12
CNC machining center Type: BMG 311/42/F/K Manufacturer: Homag Year: 2015 Control: Homag powerTouch Software: HOMAG WOODWOP 7.0 Working dimension X: 4.200 mm Working dimension Y: 1.550 mm Working dimension Z: 270 mm Number of milling spindles: 1 Main motor power: 10 kW Rotation speed max: 24.000 rpm 4th axis: Yes 5th axis 5-axes spindle Tool clamping system: HSK-F63 Tool changer positions: 18 Disc tool changer Vertical drilling spindles: 17 Horizontal drilling spindles in X: 2 Horizontal drilling spindles in Y: 2 Groove saw: 90° turnable Gantry machine: Yes Machine table Pod and rail table Number of consoles: 6 Positioning aid Crosshair laser Vacuum pump Number of vacuum pumps: 2 Capacity vacuum pump: 180 m³/h Safety device Bumper Two rows of stops Workpiece support aids Stop for top layer protrusion Machine in good condition, fully functional Find m ...
Edge banding machine Type: PROFIMATIC PM 2508-F Manufacturer: OTT Year: 2005 Hours: approx 300 Edge thickness: 0.220 mm Min width of the working part: 70 mm Min height of the working part: 8 mm Max height of the working part: 60 mm Min length of part: 150 mm Operating voltage: 400 V / 50 Hz Continuous speed: 1020 m/min Adhesive application: glue application cylinder with Vario Melt automatic dosing Working height: 880 mm Compressed air connection: 6 bar / 1/4 Dimensions: 8850 x 1250 x 1500 mm Weight: 4,000 kg Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines
Manufacturer: Wemhoener Model: DEK 06 Type of Machine: Single-Level Short-Cycle Press Year of Manufacture: 2001 Condition: Good condition, still produces occasionally Press Counter: currently 13.65 million pressings Technical Specifications: - Heating plate format: 5,700 x 2,300 mm - Plate format capacity: 5,600 x 2,220 mm - Total press pressure: 49,728 kN - Specific press pressure: 400 N per square centimetre - Working pressure: 320 bar - Maximum operating temperature: 220 degrees Celsius - Required drive power: 63 kW - Operating voltage: 400 V, 50 Hz - Tank filling: 2,000 / 4,000 litres - Pump type: 2xA2F032/61L-P6H4-2x/050R - Secondary heating medium: thermal oil - Electrical control: Siemens S7/400 PLC Output and Capacity: - Minimum cycle time: 20 seconds, equal to 180 cycles per hour in single-format setup - Minimum cycle time: 25 seconds, equal to 144 cycles per hour in do ...
plate thickness: 4 mmblade length: 150 mmcutting angle: 30-120 °Table dimensions: 1000x650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
2020 Giardiana DUAL TECH 420 SBC DRY Overall dimensions - Width: 4850 mm - Length: 4930 mm - Max height: 2845 mm - Working height: 900 mm (+/- 50) Workpiece capacity - Width: 100–1300 mm - Length: 100–2800 mm - Max thickness: 50 mm Electrical - Voltage: 400 V - Motor protection: ATEX3G + PTC - Total power: 14.5 kW Paper belt conveyor - Speed: 1–3 m/min - Gearbox: S301P 1:8.9 P.71 B3 - Motor: 0.37 kW Infeed conveyor - Speed: 2–6 m/min - Gearbox: VF44FA1100 P63 B5 B3 - Motor: 0.18 kW Central conveyor - Speed: 1.5–4.5 m/min - Gearbox: C323P 1/136 P71 B3 - Motor: 0.37 kW Outfeed conveyor - Speed: 2–6 m/min - Gearbox: VF 44 P 100 P63 B5 B8 - Motor: 0.18 kW Spray guns - Quantity: 4 - Model: TT1301 MACH5 UG.09-154 FILTERMEDIA Spray gun drive system - Gearbox: C322P 7.2 SK110B B7 - Motor: brushless - Gun travel speed: 0–120 m/min Air supply unit - Intake air flo ...
0: 160 mm0: 1680 m³/h0: 500 paDimensions (L/W/H): 2.450 x 1.000 x 750-1.050 mmweight: 175 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: , mm0: 3100 m³/h0: , paThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max. in kg: 3000 kgGripping range: bis 400 mmSuspension: 250 mmweight: . kgweight max.: 3 tclamping width: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
utilisé
weight max. in kg: . kgGripping range: . mmSuspension: . 0weight: . kgweight max.: . tclamping width: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max. in kg: 2000 kgGripping range: 1050-1200 mmSuspension: . 0weight: 180 kgweight max.: 2 tclamping width: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max. in kg: 2000 kgGripping range: 700 mmSuspension: . 0weight: 60 kgweight max.: 2 tclamping width: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max. in kg: 2000 kgGripping range: 1050-1200 mmSuspension: . 0weight: 180 kgweight max.: 2 tclamping width: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max. in kg: 3000 kgGripping range: bis 400 mmSuspension: 250 mmweight: . kgweight max.: 3 tclamping width: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max. in kg: 2000 kgGripping range: 550-650 mmSuspension: . 0weight: . kgweight max.: 2 tclamping width: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max. in kg: 2000 kgGripping range: 750-900 mmSuspension: . 0weight: . kgweight max.: 2 tclamping width: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Distance between centres: 1200 mmSpeed: A) 70 - 380 U/min.turning speeds: B) 380 - 2000 U/minweight: 2,2 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Panel saw Type: K 975 Manufacturer: Felder Year: 2008 Table length: 2500 mm Electric lift and tilt Pneumatic pressure Pre-cut Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines
Manufacturer: Schelling Year of manufacture: 2002 Model: FM-H 430/410 Type of machine: Panel Saw Voltage: 400 V, 50 Hz Current: 60 A Power: 27 KW Find more here - .ucymachines/ Contact us at - sales@ucymachines
5.000 € 
