시트 폭: 3554mm 시트 두께: 42mm 벤딩: 36mm 제어: 총 전력 요구 사항: kW 기계 무게 약: 49t 공간 요구 사항 약: 7.3x2.4x2.5m 베어링 번호 2210024 기계 유형 4롤 CNC 판금 벤딩 머신 만들기 FACCIN 유형 4HEL 3554 건설 연도 2000 제어 유형 CNC 추가 정보 캡. 3554 x 42mm 벤딩 최대 36mm 상단 롤 직경. 540mm 바닥 롤 디암. 530mm mm 페이지 롤 디암. 430 mm 55 Kw LxWxH = 7350 x 2400 x 2500 mm 무게의 기계 49 톤 데이터 f & uuml,이 광고는 ModulMWS - LogoTech oHG의 기계 관리로 작성되었습니다.
플레이트 벤딩 머신 FACIN - 4 롤 유압 3000 X 40 MM - 모델 4HCI3-35 / 30 년 1990 /2025 플레이트 벤딩 롤 리니어 가이드웨이 더블 핀치 프리 벤딩 양호한 작동 상태의 기계 굽힘 용량 -플레이트 폭 : 3000 mm ᆞ 롤링 플레이트 두께 40mm - 프리벤드 두께 35mm 롤 치수: ● 유용한 길이 3050mm ᆞ 중앙 롤 상/하 D 470mm ● 사이드 롤 좌우 D 420mm • 4 롤 고강도 표면의 경화 • 유압 모터가 있는 감속기로 구동되는 3롤 구동 • 원뿔형 굽힘 부착 측면 롤, 원뿔 형태로 기울일 수 있음, 콘트라스트 패드 롤러 유형. • 닫힌 쉘을 내리기 위해 전면 유압 드롭 엔드를 엽니다. • 가변 속도 작업, 롤 벤딩 회전, 유압 속도, 빠르거 ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm : 12 mm : 12 mm : 6.5 mm : 8 mm : 8 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm : 27 mm : 27 mm : 18 mm : 23 mm : 20 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm : 25 mm : 25 mm : 16 mm : 20 mm : 18 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm : 28 mm : 28 mm : 22 mm : 26 mm : 23 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm : 8 mm : 8 mm : 4.9 mm : 6 mm : 6 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear gu ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm : 14 mm : 14 mm : 8.4 mm : 10 mm : 9 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm : 22 mm : 22 mm : 16 mm : 19 mm : 17 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 1500 mm : 6 mm : 6 mm : 4 mm : 5 mm : 4 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear guid ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm : 7 mm : 7 mm : 4 mm : 5 mm : 5 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear guid ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm : 18 mm : 18 mm : 12.1 mm : 15 mm : 13 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double line ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm : 20 mm : 20 mm : 12 mm : 15 mm : 13 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...
2022년에 제작된 판 롤링 머신입니다. 이 FACCIN 4HEL-2017은 연강의 굽힘 길이가 2000mm이며, 최대 굽힘 용량은 6mm입니다. 특정 조건에서 프리벤딩 없이 최대 6mm 두께의 판을 처리할 수 있습니다. 고품질 굽힘 능력을 원하신다면, 저희가 판매 중인 FACCIN 4HEL-2017 기계를 고려해 보세요. 자세한 내용은 저희에게 문의해 주세요.
제안 26165 기술 데이터 - 두 개의 구동 롤러, 각 롤러는 유압식 조절 가능 - 굽힘 및 원뿔형 굴림 - 디지털 실제 값 표시가 가능한 별도의 제어판 작동. - 수동 운전 - 최대 작업 폭 1300mm - 최대 시트 두께는 휘지 않고 400 N/mm² - 굽힘 직경 370 mm, 내부는 30 mm - 굽힘 직경 370 mm, 내부 25 mm 굽힘 - 굽힘 없이 내부가 굽힘 직경 380 mm이고 - 폭 370 mm 45 mm - 상부 롤러 직경: 각 300mm - 측면 롤러 직경 각 310mm - 작업 속도: 분당 4.5 m. - 구동 400 V / 30 kW - 필요 공간: W 5800 x H 1900 x D 2200 mm - 무게 8500 kg
plate width: 3200 mm plate thickness: 83 mm pre-bending: 72 mm roll diam. toproll: 700 mm roll diam. bottom roll: 650 mm side roll diameter: 550 mm distance between columns: 3300 mm roll drive: 93,2 kW turning speeds: 2 - 4 m/min total power requirement: - kW weight of the machine ca.: 78 t dimensions of the machine ca.: 9 x 3,3 x 3,4 m 4 –Roll Bending Machine - 4 roll Pinch bending - Pre-bending - Tilting function -- Hydraulic front bearing tilting speed: 450mm/min -- Hydraulic tilting of top roll: 250mm/min - CE 2 Units available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 3000 mm, 40 mm, 35 mm
판 굽힘 기계 파친 - 4롤 유압 3000 X 40 MM - 모델 4HCI3-35/30 1990년 판 굽기 롤 선형 가이드웨이 더블 이니셜 핀치 양호한 상태로 사용 중인 기계 굽힘 능력 -판 폭 : 3000 mm - 롤링 플레이트 두께 40mm - 프리벤드 두께 35mm 롤 크기: -유효 길이 3050 mm - 중앙 롤 상하 D 470 mm - 측면 좌우 롤 D 420 mm • 4롤 고강도 표면의 경화 • 3개의 롤이 유압 구동 기어 유닛 • 원뿔형 굽힘 부착 측면 롤은 원뿔을 형성할 수 있도록 틸팅 가능하며, 대조 패드 롤러 타입입니다. • 플레이트를 완전히 닫고 하역하기 위해 탑롤 유압 드롭엔드를 열어 하역합니다. • 가변 속도 작업 롤, 굴절, 회전, 유압 속도, 빠름/느림. • 중앙 제 ...
사용된 Faccin HAV 3162 유압 플레이트 캘린더의 기술 데이터: 위 롤러 직경: 620 mm 옆 롤러의 직경: 550 mm 기계 차원: 8600 x 3500 x 3700 (h) mm 무게 : 90.000 kg
3 롤러 시트 용 유압 그릴의 기술 데이터 Faccin HAV 3172 사용 : 위 롤러 직경: 720 mm 사이드 롤러의 직경: 650 mm 전원 공급 장치: 380V - 50Hz 기계 크기 : 8600 x 3500 x 3700 (h) mm 무게: 90.000 킬로그램
