usado MEUSER para la venta

oferta 23015 Características técnicas: - diámetro de giro sobre la cama 1400 mm - A través de trineo de remo 1200 mm - Altura del centro sobre la cama 720 mm - Altura del centro por encima de la manivela 900 mm - Ancho del centro 2500 mm - Diámetro del husillo 112 mm - 18 velocidades de husillo 7.8 - 400 rpm - Alimentaciones longitudinales / plan -Contrapunto - Placa frontal 1400 mm - Accionamiento 400 V / 30 kW - Espacio requerido aprox. An 6000 x H 2250 x P 2350 mm - Peso aprox. 17000 kilogramos

Diámetro del mandril de tres mordazas 240mm

Altura de la punta: 600 mm Ancho de la punta: 1500 mm Circulación: sobre la cama 1250 mm Diámetro del husillo: 102 mm Cola del cono de grabación: K 80 MK Velocidades del husillo: 8 - 400 rpm Alimentación: longitudinal/plano 0.028-2.82/0.007-0.73 mm/U Pasos de rosca: 0.25 - 192 mm Conexión eléctrica: 380 V, 10 kW Requisito de espacio: 4730 x 2200 x 1700 mm Peso: 11000 kg

Swing over bed/ support: 370/ 215mm, center height: 185mm.

Bezel, steady rest, lynette -Manufacturer: Meuser, bezel with coolant connection from lathe M4L -Max. Passage: Ø 500 mm -Center height: 390 mm -technical drawing: with the photos -Dimensions: 840/140/H850 mm -Weight: 98 kg

Moving bezel, moving bezel, bezel, steady rest, lynette -Manufacturer: Meuser, steady rest from lathe M4L -Max. Passage: Ø 180 mm -Center height: 315 mm -technical drawing: with the photos -Dimensions: 520/535/H560 mm -Weight: 32 kg

Bezel traveling, moving bezel, bezel, steady rest, lynette -Manufacturer: Meuser, bezel from lathe type MV SKV/2-1 -Bezel: driving -Max. Passage: Ø 170 mm -Center height: 230 mm -technical drawing: with the photos -Dimensions: 520/405/H510 mm -Weight: 33kg

Bezel, steady rest, lynette -Manufacturer: Homemade fits Meuser, bezel from lathe type MV SKV/2-1 -Bezel: max. passage Ø 370 mm -Center height: 460 mm -technical drawing: with the photos -Total dimensions: 910/255/H985 mm -Weight: 152 kg

Heavy duty lathe, lathe, lathe, center lathe and lathe, center lathe -Manufacturer: Meuser, master and feed spindle lathe type M3A -Turning length: 1400 mm -Swivel Ø over bed: 550 mm -Rotating Ø without bed: 800 mm -Rotating Ø over support: 300 mm -Spindle bore: Ø 58 mm -Spindle speeds: 15 - 810 rpm -Three-jaw chuck: Röhm Ø 250 mm -Faceplate: 500 mm -Accessories: incl. tool holder/tools see photos -Tailstock mount: MK5 -Dimensions: 2770/1070/H1310 mm -Weight: kg

Bezel, steady rest, lynette -Manufacturer: Meuser, bezel with coolant connection from lathe type MV SKV/2-1 -Max. Passage: Ø 350 mm -Center height: 460 mm -technical drawing: with the photos -Dimensions: 820/270/H895 mm -Weight: 160kg

turning diameter over bed: 410 mm turning diameter over slide rest: 240 mm turning length: 1000 mm centre height: 205 mm centre distance: 1000 mm spindle bore: 47 mm spindle turning speed range: 28 - 1250 U/min feeds - longitudinal: 0,03 - 8,8 mm/U feeds - cross: 0,006 - 1,84 mm/U thread - mm pitch: 0,25 - 76 mm thread - inch: 1/2 - 152 Gg/ thread - module: 0,25 - 22 mm bed width: 320 mm tailstock quill diameter: 55 mm tailstock taper MT: 4 total power requirement: 5,5 kW weight of the machine ca.: 1,3 t dimensions of machine L x W x H: 2,32 x 1,15 x 1,22 m Accessories: 3-jaw chuck RÖHM 160 mmø, MULTIFIX-head with 2 inserts, solid steady, running center, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: - Clamping cube dimensions: 780 x 450 x 460 mm - Clamping surface: 605 x 450 mm - jib length: approx. 1000 mm - Feed rate: 0.04 - 0.4 mm/r - Speed range: 50 - 2250 rpm weight approx.: 2,000 kg, dimensions (l x w x h) approx.: 2,200 x 900 x 2,300 mm

turning diameter over bed: 500 mm turning diameter over slide rest: 280 mm turning length: 1500 mm turning diameter in the gap: mm turning speeds: 22,4 - 1800 U/min centre height: 250 mm spindle bore: 85 mm total power requirement: 7,0 kW weight of the machine ca.: 2,8 t dimensions of the machine ca.: 3,3x 1,4 x 1,5 m Center Lathe - 3-jaw Forkardt chuck F315 - Quick-change steel post with 12 tool posts - Chip tray - Emergency stop facility - bezel - Lining protection - Machine feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 70,0 mm bore capacity in cast iron: 85,0 mm arm length: 580 - 2450 mm tool taper: 6 MK pivoting angle: +/- 180 Grad stroke: 475 mm turning speeds: 22 - 1800 U/min feed: 0,08 - 1,6 mm/U column diameter: 480 mm base plate: 3625 x 1100 mm height adjustment: Ausleger 845 mm distance work spindle /surface of the table: 380 - 1700 mm threading: max. M 80 voltage: 400 V total power requirement: 7,5 kW weight of the machine ca.: 8950 kg. range L-W-H: 3300 x 1510 x 3200 mm from a maintenance workshop maintained condition () Furnishing: - very robust / heavy radial drilling machine with a lot of high-priced accessories - 1x cube clamping table with T-slots - 1x machine vise - automatic spindle feed - R/L run of the drilling spindle - electric height adjustment from the boom - hydraulic clamping column-base - mechanical clamping boom-drilling head - Manual-hydr ...

Capacidad del orificio en acero (diámetro): 35 mm Longitud del brazo: 1250 mm Altura de la pieza de trabajo máx.: -- mm Velocidades de giro: U / min cono MK: 4 peso de la máquina ca.: t Dimensiones de la máquina ca.: m

Capacidad del orificio en acero (diámetro): 50 mm Longitud del brazo: 1500 mm Altura de la pieza de trabajo máx.: -- mm Velocidades de giro: 25 - 2000 U/min cono MK: 5 Diámetro de la columna: 350 mm Carrera: 150 mm Potencia total requerida: 7,5 kW Peso de la máquina aprox.: 4000 kg Dimensiones de la máquina aprox.: 2200 x 1200 x 2800 m

turning diameter over bed: 420 mm turning diameter over slide rest: 240 mm turning length: 1000 mm centre height: 210 mm spindle bore: 48 mm turning speed range: 28 - 1250 U/min feeds - longitudinal: 0,03 - 1,10 mm/U feeds - cross: 0,006 - 0,23 mm/U thread - mm pitch: 0,25 - 76 mm thread - inch: 1/2 - 152 Gang / inch. tailstock quill diameter: 55 mm tailstock quill taper MT: 4 main drive motor: 3 kW total power requirement: 4 kW weight of the machine ca.: 1,7 t range L-W-H: 2,2 x 1,4 x 1,4 mm 3-jaw chuck 250 mm quick change steel holder with 3 cases, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Chuck de 3 garras 4 garras chuck dia 1100 mm 1 estableDistancia entre centros: 7000 mm Columpio sobre la cama: 1480 mm Balanceo sobre deslizamiento transversal: 1150 mm Oscilación en el hueco: 1800 mm Diámetro del orificio del husillo principal: 102 mm Potencia del husillo principal: 22 kW Número de velocidades: 8 > 400 rpm

altura del centro: 620 mm alva: máx. 400 mm peso de la máquina aprox.: 200 kg

: : 290 mm beide centro altura: 300 mm beide diameter: 150 mm / Lynette 1 Diameter: 250 mm / Lynette 2