máquinas para el procesado de metales / fresadoras / Fresadoras de mesa redonda
Fabricante: DMG MORI
Modelo:CMX 50 U
Tipo de máquina: Fresadoras de mesa redonda
Número de artículo: 168467901
Cantidad: 1
Fecha: 24.12.2025
Ubicación:
Alemania
Precio:
Seller-item-No.:011200
| General | |
| Universal Milling Machines; Control: DMG MORI SLIMline® Multi-Touch control | |
| Working area 1 | |
| Longitudinal | 500 mm |
| Cross | 450 mm |
| Vertical | 400 mm |
| Technical Data | |
| Feed rate longitudinal/transverse/vertical | 30000/30000/30000 mm/min |
| Rapid traverse longitudinal/transverse/vertical | 30/30/30 m/min |
| Floor space/Weight | |
| Dimensions (L x W x H) | 3,15 x 2,86 x 2,71 (4,14 x 2,91 x 2,71) m |
| Weight approx. | 4700 Kg |
| Swivel Rotary Table Powered B/C Axes | Swivel Rotary Table Powered B/C Axes with automatic hydraulic clamping Electronic angle indication (B&C Axes) and Working Plane transformation For positioning only! |
| Mode for positioning only | |
| 5. Axes (swivelling range) -5/+110 x 0,001 degree | |
| 4. Axes (swivelling range) 360 x 0,001 degree | |
| Distance between T-Slots 63 mm | |
| Number of Slots 7 | |
| Slot width 14 mm | |
| Maximum load (table centre) 200 Kg | |
| Table surface Ø 630 x 500 mm | |
| Type of Measuring system Direct measuring system | |
| Direct measuring system X,Y,Z | Direct Measuring System X, Y, Z inclusive Air Purge for Measuring System |
| inlineMASTER® spindle 15.000 rpm | inlineMASTER® spindle 15.000 rpm Spindle speed range 20 to 15.000 rpm Tool Taper SK40 DIN69871 with BIG PLUS inteface Tool clamping according to DIN69872 Power: 20kW (40% DC) / 14,5kW (100% DC) Torque: 121 Nm (40% DC) / 84 Nm (100% DC) bearings oil-air |
| Tool Magazine 60 places | Tool Magazine 60 places SK40 Option includes: - Tool magazine 60 places with double gripper; chain type, servo drive - Tool (Un-) Loading through Magazine Door during AUTO Mode - Tool magazine door - Automatic magazine shutter (instead of brushes |
| Air coolant internal (through spindle centre) | Air Coolant Internal (through spindle centre) switchable via M-Function maintained air with low oil rate |
| Tropical Package for inlineMASTER | Tropical Package Option includes: - Active cooling unit for electrical cabinet - Additional ventilator for control panel - Hydraulic oil temperature sensor - Chiller unit 3,3 kW for main drive Option available for inlineMASTER® 12.000 rpm or 15.000 rpm |
| Renishaw Touch Probe-Kit for SIEMENS control | Touch Probe-Kit for SIEMENS control Option includes: - PP40 Touch Probe with optical signal transmission; - D51252871 TS27R Probe for Tool Measurement; - Calibration Tool; - Calibration Ring; - Case for equipment. Direct measuring system recommended |
| Preparation 3D quickSET | Machine Preparation for use of the 3D quickSET Toolkit. Option included software for 3D quickSET for one machine (only with option Touch Probe) |
| Production Package 40 bar | Production Package 40 bar Option includes: - Internal coolant supply 40 bar - Tank capacity: 600l with papertype filter - Chip conveyor (scraper type) with tank capacity: 250 l (left) - Bed and ATC arm flushing via M-Function - Coolant spray gun for swarf |
| 10 Free M-Codes (M180-M189) | 10 Free M-Codes (M180-M189) for SIEMENS control |
| Safety Package for Power Failure | Safety Package for Power Failure Option includes: - X,Y - axis motor with brake - Overload limiter - Undervoltage monitoring |
| Technology cycle MPC 2.0 | Technology Cycle Machine Protection Control MPC 2.0 Technology cycle monitors the spindle for vibrations, crash, imbalance and defective spindle bearings. Machine protection by quick shutdown. For SIEMENS control |
| Machine preparation for PH 150_PH Cell / EROWA | Machine Preparation for Pallet handling system PH 150 / PH Cell with EROWA equipment Option includes: - Automatic lift door on right cabin side - Robot interface (DMG MORI Standard) - Hydraulic / pneumatic preparation with 4 channels on the machine tab |
| Special equipment | SK-FA0176 Tool clamping HSK-A63 for tool tapers according to DIN 69893 |
| Special equipment | PH-150 pallet loading and unloading system with handling system and pallet magazine |
| 2018 | DMG MORI | CMX 600 V | 57500 EUR |
| 2022 | DMG MORI | CMX 70U | |
| 2023 | DMG MORI | CMX 1100 V | |
| 2019 | DMG MORI | CMX 1100 V | |
| DMG MORI | CMX 800 V | ||
| 2017 | DMG MORI | CMX 600 V | |
| DMG MORI | CMX 600 V | ||
| 2017 | DMG MORI | CMX 600 V | |
| DMG MORI | CMX 1100 V | ||
| DMG MORI | CMX 1100 V |
| 2018 | DMG MORI | CMX 70 U | 96430 EUR | [Dec 2024] |
| 2018 | DMG MORI | CMX 70 U | 113615 EUR | [Apr 2022] |
| 2022 | DMG MORI | CMX 70U | 155000 EUR | [Oct 2024] |
| 2019 | DMG MORI | CMX 1100 V | 105835 EUR | [Dec 2024] |
| 2015 | DMG MORI | ECOMILL 50 Unive | 65000 EUR | [Nov 2022] |
| 2016 | DMG MORI | Microset UNO 20/40 | 10000 EUR | [Feb 2024] |
| 2014 | DMG MORI | ULTRASONIC 10 | 200000 EUR | [Nov 2020] |
| 2016 | DMG MORI | ULTRASONIC 10 | 213953 EUR | [Dec 2020] |
