Compresores de tornillo

Description: 7.5 kW compressor Max pressure 10 bar Air dryer 0.475 kW Air tank 500 LT Working hours 2878.17model: RLR 900 TF/500B, Approx. Onsite Dimension. (l x w x h): 1,900 x 900 x 1,700 mm, weight approx.: 331 kg

Description: • Screw compressor • Serial number AII 220889 • Motor power 11 KW-3000 rpm • Maximum working pressure 7.50 bar • Air flow 1860 l/minApprox. Onsite Dimension. (l x w x h): 1,150 x 800 x 1,160 mm, weight approx.: 400 kg

Description: 13533 working hoursApprox. Onsite Dimension. (l x w x h): 2,100 x 1,100 x 1,500 mm, weight approx.: 1,000 kg

Description: • Screw compressor with built-in air dryer • Serial number  ,AII 237101 • Motor power 22 KW-3000 rpm • Maximum working pressure 7.50 bar • Air flow 3600 l/min • ATLAS COPCO ID 60 built-in air dryerApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,160 mm, weight approx.: 480 kg

Description: Power consumption: 55 kW Delivery rate: 1,450 - 19,360 l/min Operating hours: 47,064 b/h Electric motor with new bearings Machine runs, but has bearing noises on the screw element Machine is sold as defective Utilization: 0 - 20: 2% 20 - 40: 86% 40 - 60: 10% 60 - 80: 2% 80 - 100: 0%operating pressure: max. 12,8 bar, modelname / number: API 572745, Approx. Onsite Dimension. (l x w x h): 2,040 x 970 x 1,800 mm, weight approx.: 1,350 kg

feed pressure: 9,8 barliter capacity: 17 l/svolume capacity: 1,02 m³/mintotal power requirement: 7,5 kWweight of the machine ca.: 0,352 tAtlas Copco screw compressor G 7 FF - 9.8 bar incl. 270 litre tankFully automatic, internally fully piped and wired compact unit, single-stage, oil-injected compression, air-cooled, sound-insulated. Built-in refrigeration dryer.- Steel base frame for installation without foundations. Compressor and motor elastically mounted on base frame.- V-belt drive with mechanical tensioning device between motor and compressor element.- Sheet steel acoustic bonnet with large removable side panels.- Air intake filter with loading and unloading valve.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: serial number: AII 467935 Technical specifications: maximum working pressure: 10 bar free air delivery: 192 l/s nominal shaft power: 75kW rotational shaft speed: 3000 rot/min air dryer is included in the compressor (full-feature) control panel: Elektronikon total working hours: aprox 64370 model: GA75, operating pressure: 10 bar, year of manufacture: 1,999, Approx. Onsite Dimension. (l x w x h): 2,150 x 1,050 x 2,050 mm, weight approx.: 1,700 kg

Description: Machine number AII 469040 max. pressure 7.5 bar Power consumption 75 kW Delivery rate 14,040 l/min Operating hours 46,900 b/h new touch electronics installed Approx. Onsite Dimension. (l x w x h): 2,290 x 1,000 x 2,000 mm, weight approx.: 1,550 kg

Description: Machine number API 658431 max. pressure 13 bar Power consumption 75 kW Delivery rate 14,680 l/min Operating hours unknown , Electrical frequency converter defective Machine is sold as defective Approx. Onsite Dimension. (l x w x h): 2,290 x 1,080 x 1,820 mm, weight approx.: 1,680 kg

Description: Pmax: 7,8bar Flow rate: 13,82m3/min Motor power: 75kW Motor rpm: 2950 1/min operating pressure: 8, Approx. Onsite Dimension. (l x w x h): 2,100 x 1,000 x 2,000 mm, weight approx.: 1,700 kg

presión de alimentación: 8 barlitro capacidad: lpotencia total requerida: kWpeso de la máquina ca.: tdimensiones de la máquina ca.: m

flow rate: 1,95 m3/min, suction capacity: 11 kW, operating pressure: 13, Approx. Onsite Dimension. (l x w x h): 630 x 630 x 1,400 mm, weight approx.: 191 kg

Description: Operating hours 71,073 B/h Utilization: 0-20 = 2% | ,20-40 = 74% | 40-60 = 11% | 60-80 = 7% | ,80-100 = 6% The machine runs, but has bearing noisesdriving power to: 30 kW, flow rate: 4.580 l/min, operating pressure: max. 13 bar, modelname / number: AII 298855, year of manufacture: 2,004, Approx. Onsite Dimension. (l x w x h): 1,680 x 65 x 1,400 mm, weight approx.: 520 kg

Presión de alimentación: 7 bar Capacidad de litro: 1000 l/min Presión de funcionamiento: 10 barPotencia total requerida: 7,5 kWPeso de la máquina aprox.: 0,52 tDimensiones de la máquina aprox.: 2,4 x 1,0 x 1,9 mCompresor combinado Srew con secador y tanque- secado- Tanque- ruido lvl. 72 dB

Description: Machine number: 5086058 Volume flow: 2240 m³/min Final pressure of the compressor: 10 bar Motor speed: 3000 rpm Motor power: 15 kW Incl. screw Type: BS 32 Main rotor speed: max. 6800 rpm Operating pressure: max. 14 bar Drive power: max. 22 kW Outlet temperature air/oil: max. 110°CApprox. Onsite Dimension. (l x w x h): 1,600 x 800 x 1,600 mm, weight approx.: 500 kg

Description: .Approx. Onsite Dimension. (l x w x h): 1,000 x 500 x 1,300 mm, weight approx.: 250 kg

Description: Machine number: 5039933 Volume flow: 2.24 m³/min Final compression pressure: 10 bar Motor speed: 3000 rpm Connection: 15 kW Incl. compressed air tankApprox. Onsite Dimension. (l x w x h): 1,700 x 700 x 1,500 mm, weight approx.: 500 kg

Presión de alimentación: 8 barCapacidad de litro: 1,65 m³ / minDimensiones: 1000 x 750 x 950 mmPotencia total requerida: 11 kWPeso de la máquina aprox.: 175 kg

Description: Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Rated current: 50 AApprox. Onsite Dimension. (l x w x h): 1,200 x 900 x 1,200 mm, weight approx.: 300 kg

Presión de alimentación: 10 barCapacidad de litro: 2,66 m³ / minPotencia total requerida: 18,5 kWVelocidades del motor: 3000 min/1Dimensiones: 1200 x 900 x 1200 mmPeso de la máquina aprox.: 150 kg

feed pressure: 10 barEffective free air delivery: 1.450 L/minmotor: 400 V0: 250 Literweight of the machine ca.: 452 kg.total power requirement: 11,0 kWrange L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series List price: 8.170 euros Made in GermanyFurnishing:- with container and dryer / can be used immediately- SOLIDcontrol microprocessor control- Network pressure sensor- Belt-driven drive system- low compressed air temperature due to effective aftercooler- Compressed air tank installed horizontally- including cold compressed air dryer working automatically with pre- and post-filter (mounted)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10 barEffective free air delivery: 1.950 L/minmotor: 400 V0: 250 Literweight of the machine ca.: 467 kg.total power requirement: 15,0 kWrange L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series List price: 8.170 euros Made in GermanyFurnishing:- with container and dryer / can be used immediately- SOLIDcontrol microprocessor control- Network pressure sensor- Belt-driven drive system- low compressed air temperature due to effective aftercooler- Compressed air tank installed horizontally- including cold compressed air dryer working automatically with pre- and post-filter (mounted)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10 barEffective free air delivery: 490 L/minmotor: 400 V0: 250 Literweight of the machine ca.: 246 kg.total power requirement: 4,0 kWrange L-W-H: 1240 x 650 x 950 mm Exhibition machine / not yet in use new BOGE SOLID model series List price: 7.476 euros Made in GermanyFurnishing:- with container and dryer / can be used immediately- Microprocessor control SOLID base control- Network pressure sensor- Belt driven drive system- low compressed air temperature due to effective aftercooler- lying underneath compressed air tank- including cold compressed air dryer automatically working with pre- and post-filter ( mounted )(also available with 7.5 bar)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10 barEffective free air delivery: 700 L/minmotor: 400 V0: 250 Literweight of the machine ca.: 397 kg.total power requirement: 5,5 kWrange L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series List price: 8.170 euros Made in GermanyFurnishing:- with container and dryer / can be used immediately- SOLIDcontrol microprocessor control- Network pressure sensor- Belt-driven drive system- low compressed air temperature due to effective aftercooler- Compressed air tank installed horizontally- including cold compressed air dryer working automatically with pre- and post-filter (mounted)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10 barEffective free air delivery: 1.000 L/minmotor: 400 V0: 250 Literweight of the machine ca.: 463 kg.total power requirement: 7,5 kWrange L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series List price: 8.170 euros Made in GermanyFurnishing:- with container and dryer / can be used immediately- SOLIDcontrol microprocessor control- Network pressure sensor- Belt-driven drive system- low compressed air temperature due to effective aftercooler- Compressed air tank installed horizontally- including cold compressed air dryer working automatically with pre- and post-filter (mounted)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Recorded operating hours 18,594, maximum pressure 7.5 bar, motor power 37 kW, motor speed 2165 rpm, final compression pressure 10 bar, volume flow 2.25 to 6.43 cubic meters per minute, without ventilation duct, with CE certificateflow rate: 6.43, year of manufacture: 2,014, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,100 x 2,000 mm, weight approx.: 1,300 kg

Description: Calculated operating hours engine 7,490, rated power drive motor 37 kW, ,final compression pressure 8 bar, volume flow 2.30 - 7.16 cubic meters/min, ,engine speed 2520 rpmflow rate: 7.16, Approx. Onsite Dimension. (l x w x h): 1,100 x 2,100 x 1,500 mm, weight approx.: 1,300 kg

Description: Ceccato CSC 40 screw air compressor (under brand of Atlas Copco ) Technical data: max. working pressure : 8 bars free air delivery at reference conditions : 5400 m3/h working hours in total : approx. 35000 hrs. working hours under load: approx. 18000 hrs. rated power : 30 kW ATLAS COPCO airend! dimensions: (LxWxH) : 1247x1060x1630 weight : 695 Please also take a look of video of the machine! Other features: CSC 40 compressor is compact, easy to install, solid, they have great performance and last but not least, they need very low maintenance. Accessibility of all components makes service and cleaning very easy. Without any doubt the best choice for strong, carefree and economical compressed air throughout your workplace. Key Benefits: DRD 75 IVR DRY outstanding, first-class components compact design all service components located at the front for excellent accessibility i ...

presión de alimentación: 8 barpotencia total requerida: 11 kWAño: 1995

Presión de alimentación: 10 bar Capacidad del litro: 15,5 l/sPotencia total requerida: 7,5 kWPeso de la máquina aprox.: 0,2 TDimensiones de la máquina aprox.: 0,8 x 0,7 x 1,0 mCompresor Compact SREW- Refrigeración Secado Híbrido de Energía Seca- Tanque 500 ltr., 11 bar

Description: Nominal pressure: 8 bar Volume flow: 3.7 m³/min Power: 22 kWApprox. Onsite Dimension. (l x w x h): 1,000 x 700 x 1,000 mm, weight approx.: 440 kg

Presión de alimentación: 10 barCapacidad de litro: 1400 m³ / minDimensiones: 700 x 550 x 1100 mmPotencia total requerida: 11 kWPeso de la máquina aprox.: 275 kg

Description: Screw Air Compressor 7.5kW. Current:10HP /7.5kW/ 10A ( Soft Start). Flow Rate:1.1 m3/min (38CFM). Pressure: 8Bar. Power supply: 380v 50hz 3phase. Single Stage. Motor Protection: IP54. Air Out Let Port Size: G1/2. Lubricant Oil: 5Liter The item that is delivered is NOT the one shown in the pictures, but an equal oneApprox. Onsite Dimension. (l x w x h): 750 x 980 x 1,010 mm, weight approx.: 206 kg

Description: Screw Air Compressor 22kW. Current：30HP/22kW( Y-Delta Start). Flow Rate:3.3 m3/min (116CFM). Pressure: 8Bar. Power supply: 380v 50hz 3phase. Single Stage. Motor Protection: IP54. Air Out Let Port Size：G1. Lubricant Oil: 15Liter. The item that is delivered is NOT the one shown in the pictures, but an equal oneApprox. Onsite Dimension. (l x w x h): 960 x 1,400 x 1,300 mm, weight approx.: 460 kg

Description: Screw Air Compressor 22kW. Current：30HP/22kW( Y-Delta Start). Flow Rate:3.3 m3/min (116CFM). Pressure: 8Bar. Power supply: 380v 50hz 3phase. Single Stage. Motor Protection: IP54. Air Out Let Port Size：G1. Lubricant Oil: 15Liter. The item that is delivered is NOT the one shown in the pictures, but an equal oneApprox. Onsite Dimension. (l x w x h): 960 x 1,400 x 1,300 mm, weight approx.: 460 kg

Description: Screw Air Compressor 30kW. Current：40HP/30kW (Y-Delta Start). Flow Rate:5m3/min (176CFM). Pressure: 8Bar. Power supply: 380v 50hz 3phase. Single Stage. Motor Protection: IP54. Air Out Let Port Size：G1. Lubricant Oil: 15Liter. The item that is delivered is NOT the one shown in the pictures, but an equal oneApprox. Onsite Dimension. (l x w x h): 960 x 1,400 x 1,300 mm, weight approx.: 528 kg

Description: Screw Air Compressor 30kW. Current：40HP/30kW (Y-Delta Start). Flow Rate:5m3/min (176CFM). Pressure: 8Bar. Power supply: 380v 50hz 3phase. Single Stage. Motor Protection: IP54. Air Out Let Port Size：G1. Lubricant Oil: 15Liter. The item that is delivered is NOT the one shown in the pictures, but an equal oneApprox. Onsite Dimension. (l x w x h): 960 x 1,400 x 1,300 mm, weight approx.: 528 kg

Description: 380V/50Hz Motor RPM: 1475 , Approx. Onsite Dimension. (l x w x h): 4,000 x 2,500 x 2,000 mm, weight approx.: 6,000 kg

Presión de alimentación: 10 barCapacidad litro: 3,14 m3/minPotencia total requerida: 25,3 kWPeso de la máquina aprox.: 0,52 TDimensiones de la máquina aprox.: 0,9 x 1,1 x 1,45 mcompresor de tornillo compacto-frecuencia controlada

Description: 68.143 hours of operationdriving power to: 45 kW, flow rate: 1.240 - 6.870 l/min, operating pressure: 13 bar, modelname / number: BA 21675001, year of manufacture: 2,011, Approx. Onsite Dimension. (l x w x h): 1,720 x 920 x 166 mm, weight approx.: 980 kg

motor: 220/380/420 V amperio: 4.75/2.75 Avelocidades motoras:: 1420 U/min. potencia del motor: 1,1 kWpeso: 100 kg

Description: Screw compressor with FriulAir air dryer Brand: HYDROVANE Year built: 2015 Motor: 7.5 kW Speed: 1,465 rpm Max. pressure: 11 Bar Air dryer: Brand: FriulAir Year of construction: 2015 Type: ACT12/AC Volume: Nom. 1,200 l/Min. Approx. Onsite Dimension. (l x w x h): 1,000 x 1,000 x 1,400 mm, weight approx.: 100 kg

Description: load hours 43.500 B/h Compressor re-storage at 55,069/32,985 B/h driving power to: 43 kW, flow rate: ca. 6.000 l/min, operating pressure: max. 8,5 bar, modelname / number: 2,273,050, year of manufacture: 2,001, Approx. Onsite Dimension. (l x w x h): 1,600 x 900 x 1,800 mm, weight approx.: 870 kg

flow rate: 1,54 m3/min, suction capacity: 11,5 kW, operating pressure: 9, Approx. Onsite Dimension. (l x w x h): 1,350 x 700 x 1,000 mm, weight approx.: 400 kg

Description: Model: Javac COMBI 10 Compressor type: Scrollcompressor Voltage: 3400v Motor power: 10 HP (7.5 kW) B3 IE-3 low torque Controller: Softstart Efficiency: 1100 l/min Maximum working pressure: 8.6 Bar Speed: 2900 rpm Tank capacity: 270 liters Dimensions: 1400x1600x870 mm Weight: 360 kg model: Javac COMBI 10, year of manufacture: 2,020, Approx. Onsite Dimension. (l x w x h): 1,400 x 1,600 x 870 mm, weight approx.: 400 kg

Description: Model: Javac COMBI 10 Compressor type: Scrollcompressor Voltage: 3400v Motor power: 10 HP (7.5 kW) B3 IE-3 low torque Controller: Softstart Efficiency: 1100 l/min Maximum working pressure: 8.6 Bar Speed: 2900 rpm Tank capacity: 270 liters Dimensions: 1400x1600x870 mm Weight: 400 kg tank size: 270L, modelname / number: COMBI 10, year of manufacture: 200, Approx. Onsite Dimension. (l x w x h): 1,400 x 1,600 x 870 mm, weight approx.: 400 kg

Description: max. working pressure: 10 ,bars rated ,power: 5,5 kW working hours total: approx. 1492 hrs working hours under load: approx. 531 hrs time left till maintenance: approx. 1508 hrs Please note: compressors are delivered free of liquids, media, oils and fluids inside!suction capacity: 5.5 kW, operating pressure: 10 bar, modelname / number: AIRCENTER SM 10, year of manufacture: 2,022, Approx. Onsite Dimension. (l x w x h): 630 x 594 x 1,716 mm, weight approx.: 410 kg

Description: Screw Compressor Serial number 1330 Pressure 7.5bar Motor 5.5 kW Speed 3000 r.p.m. Working hours according counter 32136 h CE availableApprox. Onsite Dimension. (l x w x h): 600 x 850 x 1,300 mm, weight approx.: 170 kg

Description: Machine number: 326125 Operating voltage: 10 bar Power: 18.5 kW Volume flow: 2.6 m³/minApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,000 mm, weight approx.: 300 kg

Description: KAESER ASD 37 SFC with Inverter Drive  , rated power: 22 kW air flow: 3700 l/m working hours: approx. 20000 hrs, 18000 hrs. under load time left to regular maintenance: approx. 3000 hrs. max.working pressure: 8.5 bar equipped with 1 RFID user card! regulary maintained service manual: unavailable  , ASD – Multiple savings zhe newly improved ASD systems save energy in a number of ways: equipped with further-refined SIGMA PRO FILE rotors, the airends are controlled and monitored by the industrial PC-based SIGMA CONTROL 2 compressor controller. This advanced controller matches compressed air delivery to actual air demand and keeps costly idling time to an absolute minimum, thanks to its dynamic control mode save energy with the SIGMA PROFILE at the heart of every ASD system lies a premium-quality airend featuring Kaeser’s SIGMA PROFILE rotors flow optimised for  ...