Máquinas de entallar

Número : 6485 Tipo: Q28B-4X200 Productor: ACL Creado: 2006 Parámetros: Espesor máximo de la chapa: 4-6 mm Consumo de energía: 4 kW Muesca: 250 x 250 mm Peso de la máquina: 1350 kg Equipo: Ángulo ajustable

Tipo de máquina: Máquina de entallado de tubos Fabricante: ALMI Estado: muy bueno Tipo de oferta: Máquina usada Características técnicas: Potencia: 5 tamaños Ø 28 – 61 mm Tipo de accionamiento: el./mech. Propulsión: 2,2 kW Observación: Subestructura Peso: 100 kg La máquina está en muy buenas condiciones y lista para su uso inmediato y puede ser vista y demostrada por nosotros. Estaremos encantados de que esté interesado en nuestra oferta. Se exceptúan errores, modificaciones y venta previa.

plate thickness: 1,50 mmblade length: 150 x 150 mmtable:: 457 x 305 mmcutting angle: 90 °adjustment of stroke: 20,0 mmweight: 73,0 kgrange L-W-H: 460 x 630 x 1150 mm- Notching with a burr-free cut, without deformation of the cut edges- For punching out corners, shapes, etc. up to a maximum of 150 x 150 mm- Body made of high-quality gray cast iron for precise work- Blades made of surface-hardened tool steelFurnishing:- manual notching machine- 2x material stops- Scales support tables- hand leverThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Espesor de la hoja: acero de 4 mm, acero inoxidable de 3 mm Ángulo ajustable entre 30 y 120 grados Peso: 1.000 kg

oferta 22391 Características técnicas: - Longitud de corte de hasta 200 mm - Espesor de corte - acero con 400N/mm² de resistencia 6 mm - Acero inoxidable con 600 N/mm² de resistencia 4 mm - Ajuste de ángulo de corte infinitamente variable 30 - 120 - sujetado neumáticamente - Ajuste automático del espacio de corte - Topes de bloqueo izquierda + derecha cada 300 mm - Superficie de soporte de mesa 1000 x 800 mm - con ranuras en T y topes de profundidad - Altura de la mesa aprox. 900 mm - Topes de profundidad - Accionamiento 400 V / 4 kW - E – Interruptor de pedal - Espacio requerido aprox. 1000 x 1350 x 1510 mm de ancho x 1510 de profundidad - Peso aprox. 1800 kg

Key data: 6 mm

Tipo : K 30 – 120 Características técnicas: Espesor de chapa 6 mm a 400 N/mm² 4 mm a 600 N/mm² Longitud de corte 200 mm Ajuste de ángulo de 30 a 120 ° Potencia de accionamiento aprox. 4 KW

: 4,0 mm: 3,0 mm: 30 - 120 Gradblade length: 150 x 150 mmwork height max.: 900 mmtable:: 1000 x 650 mmengine output: 3,0 kWweight: 850 kgrange L-W-H: 1250 x 1000 x 1160 mmFurnishing:- Notching machine with angle adjustment 30° - 120°- Simple and functional Touch Pad control panel Set-up stroke Single stroke continuous stroke- Plexiglas protection for better transparency- hardened knives also for cutting stainless steel- planed table surface to avoid tilting or slipping of the metal sheet- adjustable lift height adjustment- 2x staking stops with movable and interchangeable stop bars- free-moving footswitch- Operation manualBOSCHERT angle adjustment:- the one-piece 30° upper knife is within one tool both with a left anddirectly connected to a right lower knife- once for each notch over 30°left and once on the right.- the swivel adjustment becomes pneumatic, immediatelyafter completion  ...

: 4,0 mm: 3,0 mm: 30 - 120 Gradblade length: 150 x 150 mmwork height max.: 900 mmtable:: 1000 x 650 mmengine output: 3,0 kWweight: 850 kgrange L-W-H: 1250 x 1000 x 1160 mm Machine like NEW () Furnishing:- Notching machine with angle adjustment 30° - 120°- Simple and functional Touch Pad control panel Set-up stroke Single stroke continuous stroke- Plexiglas protection for better transparency- hardened knives also for cutting stainless steel- planed table surface to avoid tilting or slipping of the metal sheet- adjustable lift height adjustment- Waste bin- free-moving footswitch- Operation manualBOSCHERT angle adjustment:- the one-piece 30° upper knife is within one tool both with a left anddirectly connected to a right lower knife- once for each notch over 30° left and once on the right.- the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightni ...

: 4,0 mm: 3,0 mm: 30 - 120 Gradblade length: 150 x 150 mmwork height max.: 900 mmtable:: 1000 x 650 mmengine output: 3,0 kWweight: 850 kgrange L-W-H: 1250 x 1000 x 1160 mmFurnishing:- Notching machine with angle adjustment 30° - 120°- Simple and functional Touch Pad control panel Set-up stroke Single stroke continuous stroke- Plexiglas protection for better transparency- hardened knives also for cutting stainless steel- planed table surface to avoid tilting or slipping of the metal sheet- adjustable lift height adjustment- 2x staking stops with movable and interchangeable stop bars- Waste bin- free-moving footswitch- Operation manualBOSCHERT angle adjustment:- the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife- once for each notch over 30° left and once on the right.- the swivel adjustment becomes pneumatic, immediately a ...

- Longitud de corte: 220 mm - Capacidad: 4 mm - Ángulo de corte: 90 ° - Potencia requerida : 2,2 kW - Voltaje de funcionamiento: 400 V - dimensiones WxHxD: aprox. 850 x 1100 x 1100 mm - Peso: aprox. 600 kg

Capacidad: acero de 225 x 225 x 4 mm Dimensiones de la mesa: 1000 x 800 mm Potencia del motor: 4 kW País de origen: Italia Máquina LxWxH: 1100 x 820 x 1050 mm Peso de la máquina: 700 kg

Motor. Máquina de entallado con ángulo ajustable (usada) Fabricante: COMACA Tipo Junior T 10 Longitud de la cuchilla 210 mm x 210 mm Capacidad de corte de acero dulce 4 mm Capacidad de corte acero inoxidable 3 mm Golpes por minuto 45 Tamaño de la mesa 1280 x 650 mm Dispositivo de corte de ángulo variable VARCUT 200 Rango de ángulo de corte de 30 grados a 150 grados Potencia de accionamiento 2,9 kW Peso aprox. 450 kg Requisitos de espacio L 1280 m W 930 mm H 1500 mm 2 topes angulares Interruptor de pedal Capacidad de carga 10 toneladas Instrucciones La máquina está en excelentes condiciones y lista para su uso inmediato. Carretillas elevadoras disponibles, carretillas de carga libre Posibilidad de envío barato Ubicación de la máquina 48324 Sendenhorst Para consultas: 0157-35496006 El precio es neto más el 19% de  ...

espesor de la placa: 6,0 mmpresión: 18 t ángulo de corte - hoja superior: 90 longitud de la hoja: 225 x 225 mmvoltaje: 380 Vrequipo de potencia total: 5,5 kWpeso de la máquina aprox.: 650 kgdimensiones de la máquina ca.: 1,10 x 0,80 x 1,05 m- Paradas angulares ajustables

Longitud de corte máx.: 225 mm Espesor de la hoja: 3 mm electr. Conexión: 380 V, 1,5 kW Peso: aprox. 800 kg Requisito de espacio: 1080 x 820 x 1050 mm

plate thickness: 6,0 mm STplate thickness: 4,0 mm VAtable-size: 1200 x 900 mmblade length: 250 x 250 mmstrokes per minute: 45 minadjustable: Winkel 30°-135° mmwork height max.: 1050 mmengine output: 4,0 kWweight of the machine ca.: 1.300 kgrange L-W-H: 1200 x 1350 x 1600 mmFurnishing:- Robust electro-hydraulic notching machine- with adjustable angle, electro-hydraulic adjustment- 2x speeds- Inching mode for adjusting the shear blades- 2x adjustable stop rulers- Machined work table, with T-slots- free-moving footswitch- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Nominal force: 90kN Maximum pressure: 280Bar Installed power 4kW Maximum cutting thickness 6 mmApprox. Onsite Dimension. (l x w x h): 1,100 x 1,050 x 1,350 mm, weight approx.: 850 kg

Espesor de la placa: 4 mm Longitud de la hoja: 250 mm Ángulo ajustable de - hasta: Fest 90 Superficie de la mesa Grad: 900 x 800 mmPotencia total requerida: kWpeso de la máquina aprox.: 0,65 tDimensiones: 1,2 x 0,9 x 1,1 mEntalladora hidráulica- Interruptor de pedal- 2 uds. tope de chapa

plate thickness: siehe TD mmpressure: siehe TD ttotal power requirement: 4 kWweight of the machine ca.: 0,950 tdimensions of the machine ca.: 900 x 1050 x 1300mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 6.5 mmthickness at Niro-steel: 5.0 mmangle adjustable from - to: 30 - 140 Gradno. of strokes: ca. 50 Hub/mintable:: 950 x 1030 mmblade length: 220 x 220 mmtotal power requirement: 4.0 kWweight: 800 kgrange L-W-H: 1100 x 950 x 1280 mm current new price approx. 25.000 euros Special price on requestFurnishing:- electro-hydraulic notching machine- Multi-functional machine with 2x workstations 1x notching, 1x bending station including bending tools- manual angle adjustment 30 - 140 degrees 2x handwheels for angle adjustment- large / stable work table- 2x angle stop, adjustable- automatic cutting gap adjustment- freely movable foot switch- Connection cable + 16A plug- Cutting performance: 6.0 mm to 60° ST 5.0 mm to 60° VA 4.0 mm to 30° ST 3.0 mm to 30° VA Machine link:http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno =1008-9397094The data for this ad was cr ...

Espesor de la placa: 4 mmLongitud de la hoja: 200 mmÁngulo ajustable de - hasta: Jede Seite 15 - 60 Gradsuperficie de la mesa: 1000 x 780 mmPotencia total requerida: 5,0 kWPeso de la máquina aprox.: 0,9 tDimensiones: 1,6 x 1,1 x 1,75 mEntalladora hidráulica- Interruptor de pedal- 2 uds. tope de chapa

espesor de la placa: 2,0 mm diámetro del tubo: 60,0 mmmotor: 400 voltios

plate thickness: 4,0 mm STplate thickness: 3,0 mm VAtable-size: 1200 x 780 mmblade length: 200 x 200 mmstrokes per minute: ca. 60 minangle adjustable from - to: 15 - 150 Gradengine output: 4,0 kWweight of the machine ca.: 1200 kgdimensions of the machine ca.: 1700 x 1000 x 1500 mmFurnishing:- electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels- front panel- Plexiglas protection for better transparency- hardened knives also for cutting stainless steel- planed table surface to avoid tilting or slipping of the metal sheet- 2x staking stops with movable and interchangeable stop bars- lateral clippings ejection- free-moving footswitch- Operation manual Machine link :http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9397088The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 4,0 mm STplate thickness: 3,0 mm VAtable-size: 1200 x 780 mmblade length: 200 x 200 mmstrokes per minute: ca. 60 minangle adjustable from - to: 15 - 150 Gradengine output: 4,0 kWweight of the machine ca.: 1200 kgdimensions of the machine ca.: 1700 x 1000 x 1500 mmFurnishing:- electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels- front panel- Plexiglas protection for better transparency- hardened knives also for cutting stainless steel- planed table surface to avoid tilting or slipping of the metal sheet- 2x staking stops with movable and interchangeable stop bars- lateral clippings ejection- free-moving footswitch- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 6 mm: - t: 4 kW: 250 mm: 90 °: 35 Hub/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Características técnicas: - Longitud de corte hasta aprox. 220 milímetros - Espesor de corte - Acero con 400 N/mm² de resistencia 4 mm - Acero inoxidable con 600 N/mm² de resistencia 3 mm - Ángulo de corte 90 ° - Velocidad de carrera de hasta aprox. 35 1/min. - La profundidad se detiene a la izquierda + a la derecha - Superficie de soporte de mesa 600 x 400 mm - Altura de la mesa aprox. 1000 milímetros - E – Interruptor de pie - Accionamiento 400 V / 2,2 kW - Requisito de espacio aprox. An x Al 800 x Al 1200 x P 650 mm - Peso aprox. 500 kg

plate thickness: 4,0 mmthickness at Niro-steel: 3,0 mmblade length: 200 mmangle adjustable from - to: 30 - 120 Gradno. of strokes: 60 Hub/minoil volume: 60 ltr.table:: 1000 x 800 mmtotal power requirement: 2,62 kWweight: 800 kgrange L-W-H: 1000 x 1500 x 1440 mmFurnishing:- robust hydraulic notching machine, with adjustable angle- Adjustment range 30 - 120 degrees Adjustment with the 2x front handwheels- hydraulic clamping and locking- Infinitely adjustable cutting depth, with digital display- 2x locking accuracy stop, with stop bars- Stripper for sheet metal cutting- Collecting container for clippings- Freely movable foot pedal for triggering the strokeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grosor de chapa 4.0 mm Espesor de chapa para acero inoxidable 3.0 mm Longitud del cuchillo 200mm Ángulo infinitamente ajustable 30-135 grados Tasa de carrera 60 brazadas/min Volumen aceite 60 ltr. Mesa: 1000 x 800 mm Motor: 4kW Peso 970 kg Dimensiones L - W - H 1000 x 1660 x 1473mm Accesorios Cuchillos de repuesto

Espesor de la placa: 6 mmLongitud de la hoja: 200 mmÁngulo ajustable de - a: 30 - 135 Superficie de la mesa Grad: 780 x 1000 mmPotencia total requerida: 3,0 kWPeso de la máquina aprox.: 1,1 tDimensiones: 1,4 x 0,8 x 1,3 mMáquina de entallado hidráulica- Interruptor de pie- Pantalla digital de ángulo- Luces de la máquina- Accesorios ver imágenes

Longitud máxima de corte: 200 mm Espesor de la hoja: 4 mm Ajuste del ángulo de corte: 30 - 135° Velocidad de carrera: 60 rpm electr. Conexión: 400 V, 4 kW Peso:957 kg Dimensiones: 1600 x 1000 x 1500 mm

oferta 22346 Características técnicas: - Longitud de corte de hasta 200 mm - Espesor de corte - acero hasta 6 mm - Acero inoxidable hasta 4 mm - Ajuste de ángulo de corte infinitamente variable 30 - 135 ° - Tasa de brazada 60 1/min - Superficie de soporte de mesa con ranuras en T de 800 x 1000 mm - Topes de profundidad con ajuste de escala y ángulo - Altura de la mesa 860 mm - Accionamiento 400 V / 2.2 kW - E. - Interruptor de pedal - Espacio requerido aprox. 1000 x 1650 x 1700 mm de ancho x 1700 de profundidad - Peso aprox. 1300 kg

Características técnicas: - Longitud de corte 250 mm - Ángulo de corte 90 - Espesor de corte - Acero normal de hasta 4 mm - Acero inoxidable hasta 3 mm - Aluminio hasta 5 mm - Velocidad de carrera de hasta aprox. 55 rpm - Tamaño de la mesa W 800 x D 800 mm - Altura de trabajo aprox. 940 milímetros - Topes infinitamente ajustables en longitud y número de grados - Accionamiento 400 V / 4 kW - Llenado de aceite 50 l - E - Interruptor de pie - Requisito de espacio aprox. Ancho 800 x Alto 1250 x Profundidad 900 mm - Peso aprox. 700 kg

plate thickness: 8,0 mm STplate thickness: 5,0 mm VAtable-size: 1000 x 950 mmblade length: 200 x 200 mmstrokes per minute: 60 H/minadjustable: Winkel 30°-140° mmwork height max.: ca. 950 mmoil volume: 60 lengine output: 4,0 kWweight of the machine ca.: 1200 kgrange L-W-H: 1000 x 1120 x 1700 mm from a maintenance workshop New price at the time ~ 21.000 eurosFurnishing:- Robust electro-hydraulic notching machine- with adjustable angle, electro-hydraulic adjustment- Adjustment by hand wheels (left + right knife segment)- hardened knives also for cutting stainless steel- front panel- electro-hydraulic knife clamping- Inching mode for setting the shear blades selectable (manual mode)- planed table surface, with T-slots to avoid tilting or slipping of the metal sheet- 2x staking stops with movable and interchangeable stop bars- 2x blank holders- 1x free moving footswitch- front scrap switch  ...

plate thickness: 4 mmblade length: 200 mmtable surface area: 1000 x 780 mmangle adjustable from - to: 30 - 140 Gradwork height max.: 910 mmthickness at Niro-steel: 3 mmtotal power requirement: 4 kWweight of the machine ca.: 970 kgdimensions of the machine ca.: 1 x 1,66 x 1,47 mElectric 380 Volt: Foot switch: Squaring arm: 2 Stck.Hydraulic notching machine with adjustable angle from 30° to 140°, aut.cutting gap adjustment, hydr. clamping of the knives. As a rare special accessory, the machine has a lifting height and cutting length adjustmentDigital display. The height adjustment works, but in the cutting length range it always cuts the full length of 200 mm. Since the length reduction option is almost never ordered when purchasing these machines, except for a specific special application, we did not have the electronic device repaired. You can see the function of the machine in the v ...

Características técnicas: - Longitud de corte 250 mm - Ángulo de corte 90 - Espesor de corte - Acero normal hasta 4 mm - Acero inoxidable hasta 3 mm - Aluminio hasta 5 mm - Tasa de carrera hasta aprox. 55 rpm - Tamaño de la mesa W 800 x D 800 mm - Altura de trabajo aprox. 940 mm - Se detiene infinitamente ajustable en longitud y número de grados - Accionamiento 400 V / 4 kW - Llenado de aceite 50 l - E - Interruptor de pie - Espacio requerido aprox. An 800 x 1250 x P 900 mm - Peso aprox. 700 kg

Máquina de desvinculación, poco utilizada Máquina de muesca, menos utilizada Tipo: VA 200/ 4 Construido / yom: 1995 Fabricante / marca: KEMPFLE Tamaño de la mesa: 1000 x 800 mm Potencia:/ capacidad: 4 mm / para acero / acero 400 Nm/mm 3 mm para acero inoxidable 600Nm/mm Longitud de las cuchillas de corte: 205 mm Número de trazos/golpes: 60 por minuto Cabezal de corte/cabeza de corte: 30...135 ( sin pasos ) Peso / peso: 1.15 toneladas Valor de conexión/potencia conectada: 4 kW

plate thickness: 6 mmpressure: 12 tcutting range: Breite x Länge 200 mmno. of strokes: 15 Hub/mincutting angle: 30 - 140 °total power requirement: 4 kWweight of the machine ca.: 1,02 tdimensions of the machine ca.: 1065 x 900 x 1210 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacidad 41,9 x 2,7 R21 x 8 mm Destacado con - Pedal - Instrucciones de funcionamiento (NL) Máquina neumática

Description: Round steel 30 mm Square steel 120 x 8 mm Angle steel 30 mmApprox. Onsite Dimension. (l x w x h): 1,000 x 1,500 x 1,800 mm, weight approx.: 400 kg

Description: Round steel 30 mm Square steel 150 x 8 mm Angle steel 90x8 / 50x6 mmApprox. Onsite Dimension. (l x w x h): 1,000 x 500 x 1,800 mm, weight approx.: 400 kg

Un punzón de esquina es adecuado para un radio de aristas en ángulo recto. Materiales como papel, cartón, aluminio compuesto, aluminio de hasta 2 mm (por ejemplo, signos) y metales no ferrosos se pueden procesar con varias máquinas perforadoras y herramientas de punzonado. Eckenabrunder NPR-45 incl. 1 pieza cuchillo perforador R 4 o R 8 .

Cizallas de corte manual de excelente calidad, para el corte sin rebabas de chapa metálica de hasta 1,5 mm de espesor de chapa de acero/ST40 – aluminio 2 mm, viga de cuchillo guiada por telón, longitud de cizallamiento 150 x 150 mm, ángulo de clink 90o, dimensiones 460 x 500 x 810 mm, peso 75 kg

Description: Flat steel scissors: Knife length: 220 mm Sheets up to: 11 mm Flat steel up to: 120 x 13 mm Profile steel scissors: Angle iron up to: 80 x 8 mm T-iron up to: 80 x 8 mm U and I steel up to: 120 mm Number of strokes: approx. 55 / min. Steel bar shears: Round steel up to: 32 mm Square steel up to: 30 mm Notcher: Sheets up to: 10 mm Latch width up to: 40 mm Latch depth up to: 80 mm Hole punch: Punching capacity: approx. 35 t = 25 Ø x 11 mm / 20 Ø x 13 mmApprox. Onsite Dimension. (l x w x h): 800 x 1,250 x 1,800 mm, weight approx.: 900 kg

Key data: 3 mm

Unidad de entallado RASKIN 125 x 125 x 3 mm ¡Posibilidad de envío dentro de Alemania!

Grosor de la placa: 3 mm Longitud de la hoja: ángulo de 250 mm ajustable desde - hasta: fest 90 Superficie de la mesa de grado: 900 x 790 mmPotencia total requerida: kWpeso de la máquina aprox.: 0,7 tDimensiones: 1,2 x 0,9 x 1,2 mMáquina dentada- Interruptor de pie- Interruptor de parada deemergencia- ángulo de liberación variable

Máquina de perforación combinada, hidráulica Trabajadores de hierro hidráulico 4 kW 900 kg

pressure: - tpunching cross-cut in cmm: - stroke: 20 mmplate thickness: 4 mmblade length: 205 mmtable-size: 700 x 825 mmcutting capacity stainless steel: 3 mmthroat: 300 mmstrokes: 50 p. min.oil tank: 35 ltotal power requirement: 3 kWweight of the machine ca.: 720 tdimensions of the machine ca.: 0,7 x 0,83 x 1,1 mElectric 380 Volt: Hole punching device: Foot switch: Support arms: Squaring arm withh mm-scale: Puch tools ( diverse ): Fixed angle hydraulic punching/nothing machine, more automatic cutting gap regulation and HOLE PUNCHING HEAD.The cutting head is guided stably in guide columns over the entire stroke length, so that an exact cut is always made. The cutting angle is negative, i.e.the knives cut from front to back. This means the sheet metal cannot bendmove forward. The automatic cutting gap adjustment (patented) worksover the lower blades (therefore no tipping of the cutt ...

plate thickness: 4 mmblade length: 205 mmtable-size: 700 x 825 mmcutting capacity stainless steel: 3 mmthroat: 300 mmstrokes: 50 p. min.oil tank: 35 ltotal power requirement: 3 kWweight of the machine ca.: 720 kgdimensions of the machine ca.: 0,7 x 0,83 x 1,1 mElectric 380 Volt: Hole punching device: Foot switch: Support arms: Squaring arm withh mm-scale: Puch tools ( diverse ): Fixed angle hydraulic asuklink machine, more automaticCutting gap regulation and HOLE PUNCHING HEAD.The cutting head is guided stably in guide columns over the entire stroke length, so that an exact cut is always made. The cutting angle is negative, i.e.the knives cut from front to back. This means the sheet metal cannot bendmove forward. The automatic cutting gap adjustment (patented) worksover the lower blades (therefore no tipping of the cutting head and abrasion ofthe knife tips) and burr-free cuts are  ...

SIMASV AUSKLINKMASCHINE TIPO AF226/B - Capacita 220 x 220 x 6 mm - Hidráulica - Afete de panel 650 x 650 mm - Voetbediening - Noodstop - Documentatie - 400V DUTCHMACH Máquinas metalúrgicas ENSCHEDE - NETHERLANDS (a 3 km de la frontera alemana)

Venda una máquina de corte muy estable. Operación a dos caras 1 Desenchufe el ingesling de las esquinas. Longitud del cuchillo 100mm por cuchillo 2 Agujeros de Clinking / punzonado, cuadrados Operado con los pies Dimensiones Tabla770mm1040mm Requisito de espacio 1100mm 1000mm 1300mm alto Accesorios Se detiene

Description: Technical details: max. cutting capacity of mild steel 40 mm, max. cutting capacity of stainless steel 3 mm, infinitely variable angle adjustment from - to 30 - 120 degrees, knife length 150x150 mm, working height 900 mm, work table: 600x450 mm, additional information: pneumatic notching machine, sheet thickness 4 mm, sheet thickness with stainless steel 3 mm, cutting length 150 x 150 mm, working stroke max. 22 mm, table height 900 mmApprox. Onsite Dimension. (l x w x h): 800 x 910 x 800 mm, weight approx.: 400 kg