Verified dealer
View details
Zyklomat ZKR 14/350 Coolant cleaning system
usedVerified seller
1 / 2
Technical data
· ID 170133382Used machinery
- Condition
- used
- Year of manufacture
- 2016
- Location
- Deutschland
Identifikation
ManufacturerZyklomat
ModelZKR 14/350
Item numberM2203
Technik
Quantity1
Description
Coolant cleaning system
Manufacturer: Cyclomat
Type: CCNR 14/350
Year of Make: 2016
For cleaning the abrasive emulsion
Supply with max. approx. 250 L/min.
at approx. 3.5 bar water
Lifting into the filter system is done on site,
Air- and foam-free.
Max. temperature: 50°C
Cleaning capacity: 350 L/min.
Recirculation from clean tank to turbidity tank: 100-350 L/min.
Machine supply max.: 250 L/min.
Filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3
Separation grain limit: approx. 5 μm
Medium: Emulsion 3-6 %
Operating Temperature: Ambient Temperature
Solid particles: approx. 5.14 m3
Max. operating volume: approx. 4.58 m3
Min. operating volume: approx. 3.60 m3
Procedure:
Fully automatic full-flow filtration
Sludge discharge:
Fully automatic, with a solid consistency
The dirty liquid is supplied via on-site lifting stations.
The chips produced by grinding and the ultra-fine sludge
(abrasive abrasion, scale, corundum) is carried out via a scraper conveyor
. In the upper scraper section, the sludge is pre-dried.
Filtration is carried out via ZYKLOMAT high-performance hydrocyclones.
The system runs fully automatically.
Maintenance: annual maintenance
Availability: 10-2026
Double scraper tank for discharge of grinding sludge
Type: KR 1.75-5.1
Total volume: approx. 5.14 m3
Max. volume: approx. 4.58 m3
Length: approx. 4,000 mm, incl. 70 mm stiffener
Width: approx. 1,890 mm, incl. 140 mm stiffener
Height: approx. 1,105 mm, incl. 100 mm floor profile
Neck height: approx. 2,300 mm
Theoretical discharge volume max.: 15kg/h
Function:
Coolant storage tank with integrated clean tank,
Sedimentation and flotation tanks with
fully automatic sludge discharge.
1 spur gear motor
Voltage 400 V, 50 Hz, IP 54 as scraper drive
3 connectors for return lines of three machines
1 piece clean liquid container, integrated into the back of the scraper container.
Oil-tight welded, with inner circumferential angle wheel, various
Cover plate (non-walkable sheet metal screwed to angle frame),
without ladder, without railings, without inner entrance rungs
Max. volume: approx. 0.55 m3
Manufacturer: Cyclomat
Type: CCNR 14/350
Year of Make: 2016
For cleaning the abrasive emulsion
Supply with max. approx. 250 L/min.
at approx. 3.5 bar water
Lifting into the filter system is done on site,
Air- and foam-free.
Max. temperature: 50°C
Cleaning capacity: 350 L/min.
Recirculation from clean tank to turbidity tank: 100-350 L/min.
Machine supply max.: 250 L/min.
Filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3
Separation grain limit: approx. 5 μm
Medium: Emulsion 3-6 %
Operating Temperature: Ambient Temperature
Solid particles: approx. 5.14 m3
Max. operating volume: approx. 4.58 m3
Min. operating volume: approx. 3.60 m3
Procedure:
Fully automatic full-flow filtration
Sludge discharge:
Fully automatic, with a solid consistency
The dirty liquid is supplied via on-site lifting stations.
The chips produced by grinding and the ultra-fine sludge
(abrasive abrasion, scale, corundum) is carried out via a scraper conveyor
. In the upper scraper section, the sludge is pre-dried.
Filtration is carried out via ZYKLOMAT high-performance hydrocyclones.
The system runs fully automatically.
Maintenance: annual maintenance
Availability: 10-2026
Double scraper tank for discharge of grinding sludge
Type: KR 1.75-5.1
Total volume: approx. 5.14 m3
Max. volume: approx. 4.58 m3
Length: approx. 4,000 mm, incl. 70 mm stiffener
Width: approx. 1,890 mm, incl. 140 mm stiffener
Height: approx. 1,105 mm, incl. 100 mm floor profile
Neck height: approx. 2,300 mm
Theoretical discharge volume max.: 15kg/h
Function:
Coolant storage tank with integrated clean tank,
Sedimentation and flotation tanks with
fully automatic sludge discharge.
1 spur gear motor
Voltage 400 V, 50 Hz, IP 54 as scraper drive
3 connectors for return lines of three machines
1 piece clean liquid container, integrated into the back of the scraper container.
Oil-tight welded, with inner circumferential angle wheel, various
Cover plate (non-walkable sheet metal screwed to angle frame),
without ladder, without railings, without inner entrance rungs
Max. volume: approx. 0.55 m3
Inquire about this machine
Your inquiry goes directly to the seller of this machine.
