View details
Reznor UDSA025-3, 25,53 kW Hall heaters
usedVerified seller
1 / 5
Technical data
· ID 168431363Hall heaters
- Net price
- 2.015 € VB netto
- Condition
- used
- Location
- 46325 Borken
Identifikation
ManufacturerReznor
ModelUDSA025-3, 25,53 kW
Item number56875
Technik
Quantity1
Description
Reznor UDSA Gas Air Heater
UDSA Gas Air Heaters – Efficient Right to the Peaks
The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install recirculation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from the outdoors or from the showroom as standard.
The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent.
UDSA: compact, revolutionary and trend-setting.
With this generation of devices, halls can be heated in a particularly economical way directly – i.e. without central heating – with decentrally arranged, modulating gas hot air generators.
REZNOR UDSA
Gas hot air generator. The advantages:
Efficiency of more than 92%
Device is also suitable for vertical mounting
Low NOx emissions
Innovative combustion concept
Quiet operation
with CE system certification, version B or C
Compact design for easy installation
Uniform heat distribution
Vertical and horizontal air deflectors as standard
Modulation of the heating capacity up to 50%
EC technology
ErP Ready
These units are Direct Heated Gas WLE with Fan Assisted Atmospheric Multi-Gas Burners.
The installation of the gas WLE, the gas and exhaust gas connection may only be carried out by an approved installation company.
The gas WLE's are suitable for :
- Natural gas or liquefied petroleum gas operation
- Recirculation operation
- Suction temperatures below 5°C with stainless steel heat exchanger *
- Heating mode 1-stage, or 2-stage* control via room thermostat and control switch Heating
- Ventilation° control via ECOtronic TN - L° with day-night weekly program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outer wall, version C °
Gas WLE Type: UDSA025-3
Gas Appliances Type: B22P-C12-C32-C52-C62
Purpose: DE
Gas Category: I2ELL
Gas Type: G20 Natural Gas
Connection pressure: 20 mbar
Nozzle pressure: 8.20 mbar
Max. Nominal Heat Load (Hs) QN: 30.08 kW
Max. Nominal Heat Load (Hi) QN: 27.75 kW
Max. nominal heat output: 25.53 kW
Min. nominal heat output:
Connection voltage: 230V 1N ,50Hz
Air flow rate: 2385 m3/h
Degree of protection: IP20
More items - new and used - can be found in our shop!
International shipping costs on request!
UDSA Gas Air Heaters – Efficient Right to the Peaks
The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install recirculation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from the outdoors or from the showroom as standard.
The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent.
UDSA: compact, revolutionary and trend-setting.
With this generation of devices, halls can be heated in a particularly economical way directly – i.e. without central heating – with decentrally arranged, modulating gas hot air generators.
REZNOR UDSA
Gas hot air generator. The advantages:
Efficiency of more than 92%
Device is also suitable for vertical mounting
Low NOx emissions
Innovative combustion concept
Quiet operation
with CE system certification, version B or C
Compact design for easy installation
Uniform heat distribution
Vertical and horizontal air deflectors as standard
Modulation of the heating capacity up to 50%
EC technology
ErP Ready
These units are Direct Heated Gas WLE with Fan Assisted Atmospheric Multi-Gas Burners.
The installation of the gas WLE, the gas and exhaust gas connection may only be carried out by an approved installation company.
The gas WLE's are suitable for :
- Natural gas or liquefied petroleum gas operation
- Recirculation operation
- Suction temperatures below 5°C with stainless steel heat exchanger *
- Heating mode 1-stage, or 2-stage* control via room thermostat and control switch Heating
- Ventilation° control via ECOtronic TN - L° with day-night weekly program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outer wall, version C °
Gas WLE Type: UDSA025-3
Gas Appliances Type: B22P-C12-C32-C52-C62
Purpose: DE
Gas Category: I2ELL
Gas Type: G20 Natural Gas
Connection pressure: 20 mbar
Nozzle pressure: 8.20 mbar
Max. Nominal Heat Load (Hs) QN: 30.08 kW
Max. Nominal Heat Load (Hi) QN: 27.75 kW
Max. nominal heat output: 25.53 kW
Min. nominal heat output:
Connection voltage: 230V 1N ,50Hz
Air flow rate: 2385 m3/h
Degree of protection: IP20
More items - new and used - can be found in our shop!
International shipping costs on request!
Inquire about this machine
Your inquiry goes directly to the seller of this machine.
