swing diameter:200 mm weight of the machine ca.:15 t Distance between tips:832,5 mm turning length:380 mm with chip conveyor and belt filter press, infeed and outfeed belt 2 x 12-position revolvers
weight of the machine ca.:8 t dimensions of the machine ca.:2,95 x 1,6 x 2,36 m chucking diameter:250 mm swing diameter:265 mm x-travel:170 mm z-travel:200 mm spindle turning speed range:1.500 U/min spindle bearing diameter:100 mm Pick-up machine
turning diameter:250 mm swing diameter:260 mm Available from October 10, 2025 The system consists of two individual systems that are linked together. No driven tools!
turning diameter:250 mm swing diameter:260 mm Available from October 10, 2025 The system consists of two individual systems that are linked together. No driven tools!
Article: Vertical turning and grinding centre Manufacturer: EMAG Type: VSC 250 DS Yob: 2008 Control: SIEMENS 840D Grinding spindle speed: 30,000 rpm Rotation spindle speed: 3,000 rpm Tool places turret: 12 Cooler for spindle and machine bed cooling Cooling lubricant - lifting station (no independent cooling lubricant supply) Chip conveyor Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
control: Fanuc 31/32 i : 2 chucking diameter: 170 mm swing diameter: 210 mm x-travel: 400 mm z-travel: 200 mm length: 2500 mm width: 1900 mm height: 2300 mm weight: 5500 kg turning height: mm turning diameter: mm swing diameter: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
chuck diameter: 500 mm swing diameter over bed slide: 700 mm control: Siemens travel -x axis: 630 mm travel -z axis: 500 mm CNC turning and milling center vertical | EMAG - VMC 450 MT The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VMC450MT | VMC 450MT | VMC-450 | VMC-450MT The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: EMAG Model: VL 3 HW mLLT Year of Manufacture: 2008 Data of VL3: - Lifetool available for powered tools - Interface for automation - additional inputs and outputs / M-functions - Shuttle operation - Machine was never driven wet (always dry) Electrical Specifications: Current Supply: 3 AC Frequency: 50/60 Hz Working Voltage: 400/480 V Control Voltage - General: 24 VDC Control Voltage - Valves: 24 VDC Connection Value: 38 kW Rated Current: 58 A Supply Fuse: 80 A Physical Specifications: Total Weight: 5500 kg Find more here - / Contact us at -
CNC vertical lathe Type: VL 5i F Manufacturer: Emag Year: 2016 number of axes : 2 max clearance diameter : 250 mm max part diameter : 220 mm machining height : 175 mm strokes (X/Z) : 660 / 300 mm quick feed (X/Z) : 60 / 30 m/min turret number of positions : 12 tool-holder : VDI40 spindle power : 28 /18 kW speed : 0 to 4.500 rpm index precision C axis : 0,001° part magazine capacity diameter 30 to 85 mm : 37 pos.,max 4.5 kg part magazine capacity diameter 30 to 160 mm : 22 pos.,max 8 kg part magazine capacity diameter 80 to 220 mm : 16 pos.,max 10 kg part height max : 175 mm voltage : 400 V installed power : 36 kW dimensions floor space: 2266 x 4184 mm height : 3200 mm weight : 7.500 kg Chip conveyor Machine in good condition, under power Find more here - / Contact us at -
This 4-axis EMAG VTC 250 vertical turning machine was manufactured in 2009. It features a maximum workpiece diameter of 140 mm and a workpiece length of 630 mm. The machine is equipped with a chuck diameter of 250 mm and a maximum spindle speed of 5,000 rpm. If you are looking to get high-quality turning capabilities, consider the EMAG VTC 250 machine we have for sale. Contact us for further details.
This 4-axis EMAG VTC 100 vertical turning machine was manufactured in 2014. It features dual-turret machining with 2 tool stations, live tooling, and an enclosed working area. The machine is designed for high-volume production and is suitable for shaft machining. If you are looking to get high-quality turning capabilities, consider the EMAG VTC 100 machine we have for sale. Contact us for further details.
CONTROLS CNC controls FANUC BASIC FUNCTIONS number of spindles: 1 number of turrets: 1 MAIN SPINDLE spindle revolutions (max): 6000 /min ELECTRICAL SPECIFICATIONS total power consumption: 36 kW mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 4200 mm space requirements -front/back-: 2300 mm total height: 3200 mm total weight approx.: 7500 kg
CONTROLS CNC controls SIEMENS BASIC FUNCTIONS number of spindles: 2 number of turrets: 1 number of c-axes: 2 WORKING RANGE TURNING turning diameter (max): 100 mm worpiece length max.: 150 mm MAIN SPINDLE spindle revolutions (max): 6000 /min TOOL MAGAZINE number of positions: 12 ELECTRICAL SPECIFICATIONS total power consumption: 36 kW mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS total weight approx.: 7000 kg ATTACHMENTS (TURNING) hydraulic system: yes European CE standards: yes Machines in good condition: - Integrated pick-up automation - Two EMAG machines configured in a line are for sale. - A robot destacking unit with 100% parts inspection can also be purchased.
This 4-axis EMAG VSC 200 TWIN OP 50 was manufactured in 2005. It features simultaneous machining of two workpieces, independent X and Z axis drives, and a maximum chuck diameter of 250 mm. With a maximum X travel of 850 mm and a rapid traverse speed of 45 m/min, this machine is designed for medium to large series production. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 200 TWIN OP 50 vertical turning machine we have for sale. Contact us for further details.
This 4-axis EMAG VSC 200 TWIN was manufactured in 2005. It features simultaneous machining of two workpieces, independent X and Z axis drives, and a maximum chuck diameter of 250 mm. With a rapid traverse of 45 m/min on the X axis and a robust turret with 16 tool stations, this machine is designed for medium to large series production. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 200 TWIN vertical turning machine we have for sale. Contact us for further details.
This 4-axis EMAG VSC 200 TWIN vertical turning machine was manufactured in 2005. It features a maximum chuck diameter of 200/250 mm and a swing diameter of 260 mm. With independent X and Z axis drives, it allows for the simultaneous machining of two workpieces. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 200 TWIN machine we have for sale. Contact us for further details.
This 4-axis EMAG VSC 200 TWIN OP 10 was manufactured in 2005. It features simultaneous machining of two workpieces, independent X and Z axis drives, and a maximum chuck diameter of 250 mm. With a rapid traverse of 45 m/min on the X axis and 30 m/min on the Z axis, this vertical turning machine offers efficient performance. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 200 TWIN OP 10 machine we have for sale. Contact us for further details.
Número : 8679 Tipo: VL 5S Produtor: Emag Criado: 2007 Parâmetros: Sistema de controle: Siemens 840 SL Comprimento de alimentação eixo X: 570 mm Comprimento de alimentação eixo Z: 200 mm Diâmetro máximo de giro: 220 mm Peso máximo da peça: 120 kg Velocidade máxima do eixo: 4500 1/min Altura máxima da peça: 110 mm peso: 6500 kg Equipamento: Torreta com acionamento Leiftool Transportador de cavacos
N.º : 8680 Tipo: VSC 250 DS Produtor: Emag Criado: 2007 Parâmetros: Sistema de controle: Siemens 840 SL Diâmetro da mesa: 260 mm Comprimento de alimentação eixo X: 680 mm Comprimento de alimentação eixo Z: 200 mm Comprimento máximo de giro: 100 mm Diâmetro máximo de giro: 250 mm Peso máximo da peça: 40 kg Potência do motor: 35 kW Comprimento: 3800 mm Largura: 2100 mm Altura: 2400 mm peso: 7500 kg Equipamento: Transportador de cavacos
Número : 7575 Tipo: VL7 Produtor: Emag Erzeugt: 2010, GO 2012 Parâmetron: Steuerungssystem: Fanuc 32i TB Drehdurchmesser: 420 mm Maximale Drehzahl der Spindel: 3400 1/min Verfahrwege X: 850 mm Verfahrwege Z: 315 mm Spannfuttergröße: 400 Länge: 5250 mm Breite: 3500 mm Höhe: 3500 mm Gewicht: 9000 kg Ausstattung: Kühlung Späneförderer Angetriebene Werkzeuge Messsonde
EMAG VTC 250 Torno vertical GERAL Projeto nº: 906007 Quantidade: 1 peça. Fabricante: EMAG Tipo: VTC 250 Controlo: Siemens 840 D Ano de Fabricação: 2008 Condição: Máquina usada Máquina de Camadas Aprox. (Hrs): 2 camadas DESCRIÇÃO VIRAGEM Comprimento máximo de curva 630 mm Diâmetro máximo do mandil 200 mm Velocidade máxima do fuso principal 5000 1/min Máximo de eixo principal de potência em ED 10-40/100% 38/29 kW Binário máximo do eixo principal em ED 10-40/100% 250/200 Nm Cilindro de fixação total no eixo principal Contramão controlado por NC Revólver à esquerda Número de estações/alimentadas por 11/11 Suporte de ferramentas na torre VDI 40 Eixos na torre X/Z Velocidade máxima de travessia rápida em X/Y/Z 30/-/40 m/min Revólver à direita Número de estações/alimentadas por 11/11 Suporte de ferramentas na torre VDI ...
composta por: torno CNC EMAG VL3 DSL, BJ. 2012, Ser. Nº 103899 e torno CNC EMAG VLY, BJ. 2012, Ser. Nº 10390, cada SIEMENS SINUMERIK de controlo CNC, sistema de carregamento robótico com robô de carregamento FANUC M10iA, BJ. Em 2012, cada máquina equipava com sistema de filtro WW ME-FI 600, extração de chips Sermeto HENNIG 30 S, unidade de arrefecimento EMAG, dispositivo de refrigeração, sistema de transportadores de peças e painel de controlo manual
composta por: torno CNC EMAG VL3 V6.1, BJ. 2012, Ser. Nº 104113 e torno CNC EMAG VL3 V6.1, BJ. 2012, Ser. Nº 104114, cada sistema de carregamento robótico de controlo CNC FANUC SÉRIE 32i-MODELO A com robô de carregamento FANUC M10iA, BJ. Em 2012, cada máquina equipava com sistema de filtro WW ME-FI 600, extração de chips Sermeto HENNIG 30 S, unidade de arrefecimento EMAG, dispositivo de refrigeração, sistema de transportadores de peças e painel de controlo manual
RETROFIT da máquina em 2010, controlo CNC FANUC Série 18i TB, peso total 5.500 kg, sistema de filtragem W & W sistemas de filtro, transportador de chips SEREMETO, unidade de arrefecimento EMAG HTD 720
This EMAG VSC 250 vertical turning machine was manufactured in 2011. It features a Siemens SINUMERIK 840Dsl control system, a robust hydraulic 6-jaw chuck, and a flange turret with 12 tool positions. With a spindle speed up to 4500 rpm and a main spindle drive power of 28kW at 40% duty cycle, its ideal for precise, efficient operations. For more information about this vertical turning machine, please reach out to us.
A total of three EMAG vertical turning machines are available. Chuck diameter: 200mm, max. swing diameter: 200mm, travel X/Z: 200mm/400mm, speed: 7500rpm, tool stations: 12. Machine dimensions X/Y/Z: approx. 2450mm/1900mm/2300mm, weight: approx. 5500kg, control: Fanuc. Including extraction system and chip conveyor. Documentation available. An on-site inspection is possible.
Its System of 2 EMAG VL03 horizontal turning machines that were manufactured in 2012 and 2010. It features a Fanuc control system, Series 32i-Model A, with a travel range of 400x200mm and a spindle speed of up to 7,500 rpm. The system machine includes a 12-station tool turret with VDI 40 tool holders and a tool drive of 6,000 rpm. Consider the opportunity to buy this horizontal turning machine system with robot included. Contact us for more information about this system.
This vertical turning machine was manufactured in 2011. The EMAG VLC 250 features a Siemens Sinumerik 840Dsl control system, a 12-station tool turret, and a 3-jaw power chuck with a quick jaw change system. It includes a coolant system with a paper band filter and an electrostatic emulsion mist extractor. Ideal for handling workpieces up to 175mm in height and 12kg in weight. For more information about this vertical turning machine, please reach out to us.
A combined vertical CNC turning and cylindrical grinding center EMAG is available. Chuck diameter: 250mm, max. swing diameter: 260mm, travel X/Z: 680mm/200mm, rapid traverse X/Z: 45m/min/30m/min, grinding spindle speed: 45000rpm, tool stations: 12, basket dimensions X/Y: 400mm/600mm, basket stack: 3. Machine dimensions X/Y/Z: approx. 3200mm/1900mm/2650mm, weight: approx. 8000kg, control: Siemens 840DS, operating hours: approx. 35000h, program hours: approx. 22000h. Documentation available. An on-site inspection is possible with power.
10.000 € 
%20(11).jpg)
