这台EMAG VSC 250立式车床于2014年制造。它配备了强大的主轴传动系 统，最高功率可达28千瓦，工作周期为40%，转速范围 0-4500转/分钟。配备西门子SINUMERIK 840Dsl控制系统和坚固的12档EMAG法兰转塔，确保作的精 高效。配备专用液压夹头，非常适合搬运重达6kg的 件。如需了解更多关于这台立式车床的信息，请联系 我们
swing diameter:200 mm weight of the machine ca.:15 t Distance between tips:832,5 mm turning length:380 mm with chip conveyor and belt filter press, infeed and outfeed belt 2 x 12-position revolvers
weight of the machine ca.:8 t dimensions of the machine ca.:2,95 x 1,6 x 2,36 m chucking diameter:250 mm swing diameter:265 mm x-travel:170 mm z-travel:200 mm spindle turning speed range:1.500 U/min spindle bearing diameter:100 mm Pick-up machine
turning diameter:250 mm swing diameter:260 mm Available from October 10, 2025 The system consists of two individual systems that are linked together. No driven tools!
turning diameter:250 mm swing diameter:260 mm Available from October 10, 2025 The system consists of two individual systems that are linked together. No driven tools!
swing diameter: 210 mm x-travel: 400 mm z-travel: 200 mm control: FANUC Series 32i Model A weight of the machine ca.: ~ 5.500 kg Vertical Turning Machine | EMAG - VL 3 + VL 3 The machine is in a well-maintained condition. Please note that the technical details were added from comparable machines. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL3 | VL-3 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
swing diameter: 210 mm x-travel: 400 mm z-travel: 200 mm control: SIEMENS SINUMERIK 840D sl weight of the machine ca.: ~ 5.500 kg Vertical Turning Machine | EMAG - VL 3 + VL 3 Y The machine is in a well-maintained condition. Please note that the technical details were added from comparable machines. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL3 | VL-3 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Article: Vertical turning and grinding centre Manufacturer: EMAG Type: VSC 250 DS Yob: 2008 Control: SIEMENS 840D Grinding spindle speed: 30,000 rpm Rotation spindle speed: 3,000 rpm Tool places turret: 12 Cooler for spindle and machine bed cooling Cooling lubricant - lifting station (no independent cooling lubricant supply) Chip conveyor Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
swing diameter: 210 mm x-travel: 400 mm z-travel: 200 mm control: FANUC Series 18i TB weight of the machine ca.: ~ 5.500 kg Vertical Turning Machine | EMAG - VL 3 mLT with driven tools The machine is in a well-maintained condition. Please note that the technical details were added from comparable machines. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL3 | VL3mLT | VL-3 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: mm swing diameter: mm turning height: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: mm swing diameter: mm turning height: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning speeds: 6000 U/min x-axis: 550 mm z-axis: 200 mm rapid traverse: 30/20 m/min feed: 11 m/min control: Siemens 840 C total power requirement: 35 kW weight of the machine ca.: 6,5 t - speeds: [1/min.] : 6.000 - torque [Nm]: 480 - swing diam.: 290 mm - power: [kW] 34 - chuck diam. 200 mm - turret: 12-fach, VDI 40, Sauter - driven tools 7,8 KW, - x -travel: 550 mm - z- travel: 200 mm - rapid travel: (X/Z) [m/min] 30 / 20 - feeds: (X/Z) [m/min.] 11 KN - connected load: [KW] 36 kW - machineweight: [kg] 6.500 - chip conveyor, pick up conveyor links,300mm wide, Auswurfhöhe 800mm - Messsystem direkt-linear, Glasmaßstäbe in allen Achsen, Heidenhain - parts conveyor for feeding parts into the machine - Specification: - Overhauled in 2007 for approx. €50,000, complete headstock replaced. - Feed unit replaced The data for this ad was created with ModulMWS - the software solution of Logo ...
control: Fanuc 31/32 i : 2 chucking diameter: 170 mm swing diameter: 210 mm x-travel: 400 mm z-travel: 200 mm length: 2500 mm width: 1900 mm height: 2300 mm weight: 5500 kg turning height: mm turning diameter: mm swing diameter: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
chuck diameter: 500 mm swing diameter over bed slide: 700 mm control: Siemens travel -x axis: 630 mm travel -z axis: 500 mm CNC turning and milling center vertical | EMAG - VMC 450 MT The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VMC450MT | VMC 450MT | VMC-450 | VMC-450MT The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
制造商： EMAG 型号： VL 3 HW mLLT 制造年份： 2008 VL3 的数据： - Lifetool 可用于电动工具 - 自动化接口 - 附加输入和输出 / M 功能 - 穿梭车作 - 机器从未湿滑（始终干燥） 电气规格： 电源电流：3 AC 频率：50/60 Hz 工作电压：400/480 V 控制电压 - 通用：24 VDC 控制电压 - 阀门：24 VDC 连接值： 38 kW 额定电流： 58 A 电源保险丝：80 A 物理规格： 总重量： 5500 kg 在此处查找更多 - / 联系我们 -
EMAG VL 4 ist eine Bearbeitungszelle / Vertikaldrehmaschine für hochpräzise Fertigung, hohe Genauigkeit und zuverlässigen Dauerbetrieb. Kapazitäten: 2 Maschinen, 2 Achsen; Max. Werkstückdimension 200 mm; Z-Achse 400 mm; X-Achse 750 mm; Revolver 12 Positionen, 12 angetriebene Werkzeuge. Technische Daten: Spindeldrehzahlen bis 6000 t/min, stufenlos bis 4500 t/min; Spindelleistung 25/18 kW; Drehmoment 280/202 Nm; Anschluss 3x400V 50Hz; Gesamtbedarf 36 kW; Abmessungen L5300×B2300×H3650 mm. Zubehör: Späneförderer, automatische Be-/Entladeeinrichtung, Satz Werkzeughalter, Zustandsleuchte, Ersatzteile. Erreicht enge Toleranzen; typisch für Automobil, Luftfahrt, Werkzeugmaschinen und Medizintechnik. Technische Daten ohne Gewähr
CONTROLS CNC controls SIEMENS BASIC FUNCTIONS number of spindles: 2 number of turrets: 1 number of c-axes: 2 WORKING RANGE TURNING turning diameter (max): 100 mm worpiece length max.: 150 mm MAIN SPINDLE spindle revolutions (max): 6000 /min TOOL MAGAZINE number of positions: 12 ELECTRICAL SPECIFICATIONS total power consumption: 36 kW mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS total weight approx.: 7000 kg ATTACHMENTS (TURNING) hydraulic system: yes European CE standards: yes Machines in good condition: - Integrated pick-up automation - Two EMAG machines configured in a line are for sale. - A robot destacking unit with 100% parts inspection can also be purchased.
CONTROLS CNC controls FANUC BASIC FUNCTIONS number of spindles: 1 number of turrets: 1 WORKING RANGE TURNING turning diameter (max): 220 mm worpiece length max.: 175 mm MAIN SPINDLE spindle revolutions (max): 6000 /min X/Z SLIDE Z-axis travel: 300 mm X-axis travel: 660 mm ELECTRICAL SPECIFICATIONS total power consumption: 36 kW mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 3820 mm space requirements -front/back-: 2040 mm total height: 2400 mm total weight approx.: 6500 kg
