TOP SELLER
Key data: 1100 mm
DMC Polisand 110 RP 宽带砂光机 年份 1998 清漆宽带砂光机 总装机功率约 23 KW 打磨宽度 1100 毫米 工件厚度可达约 170 mm 带数字阅读器的电动高度定位 真空输送带，F，LLI FERRARI真空装置，电机功率 4 KW 进给电机功率 1,50 KW 骨料 1：带槽橡胶砂光辊，带鼓风机 骨料 2：砂垫，带鼓风机 两组均由 15 KW 电机驱动 380 伏 / 50 赫兹 重量 2300 Kg 尺寸：2.45 米 x 1.85 米 x 2.0 米
210 € 加入备选清单
Technical data Manufacturer: F. Zimmermann GmbH, Denkendorf/Esslingen Type: PS 1/2 Machine Type: Vertical Belt Grinder Power: 1.35 kW Voltage: 380 V Frequency: 50 Hz Configuration Large work table with sanding belt feed-through Adjustable strap guides Control panel with switching levels I/II, left/right rotation, stop button and emergency stop Remarks The machine comes from a plant closure, was actively used in production until the end and was electrified. Auction-ID: A7-49302-24
型号：0021 品牌：玻尔 - 奥地利 型号： 150/330 皮带砂光机砂垫 用于实木和单板石墨带砂光机的通用砂垫 - mm 330 x 150 外形尺寸 mm 330 x 150 x 100 h 重量 kg 4
规格： 卧式皮带磨床 工作台宽度 mm： 800 工作台长度 mm： 2，900 砂光带宽度 mm： 1，500 砂带长度 mm： 8，000 最大工作高度 mm： 600 主机功率 HP： 4 带砂光
Number of sanding units: 4 Stsanding width: 190 mmSanding height max.: 4-180 mmweight: 4200 kgHess Expert 4-belt single wood sanding machinemachine will be checked by our technicians--------------------------------------Ø Grinding at the bottom/topØ With 2 offset grinding units each (bottom and top)Ø Grinding units (bottom and top) connected in series according to theDressing principleØ Pre-sanding with coarse grit (calibrate)Ø Regrinding with fine grit (finish)Ø Central motorized height adjustment of the lower grinding unitsØ Central motorized and synchronous height adjustment of the entire upperGrinding and brushing units including the upper transport unitsØ Oscillating sanding belt utilization (during the sanding process)Ø Absolute power connection thanks to 5.5 KW motors and large dimensionsdrive drumsØ Oxide ceramic grinding shoe for- exact surface geometry- no adjustment ...
Number of sanding units: 2 st.sanding width: 180 mmSanding height max.: 150 mmMAWEG Robert Hildebrand Saturn DuoProfessional two-belt finish sanding machine with brushing unitDouble-sided, sands from top and bottomPneumatic belt oscillationPneumatic belt tensioningFeed via top and bottom conveyor belts with spring-loadedhold-down rollers, infinitely variable speed (5–15 m/min)Workpiece thickness adjustment with pre-selectable stock removal amount atmachine infeed, based on sensing the raw timber thicknessAdjustment to wood thickness via motorized positioning of themachines upper sectionDigital thickness setting via mechanical counter with 0.1 mm display andzero-point adjustmentSafety switch for oversized wood thickness at machine infeedDouble-sided brushing unit with integrated workpiece blow-offSanding belt blow-off (top and bottom)Belt breakage monitoring switch with automatic shutdo ...
200 € 加入备选清单
METABO K 100 industrial belt sander, designed for grinding, deburring and finishing operations in the mechanical workshop or in industrial production. This METABO model is a professional backstand for precise and efficient material removal, particularly used in the metalworking, locksmithing and boilermaking sectors. Thanks to its large tread size and its adapted speed, it offers an excellent compromise between power, precision and quality of finish. Ideal machine for: Machine shops Industrial maintenance Metal construction Preparation of parts before welding Deburring and finishing The METABO brand is recognized for the robustness and reliability of its professional equipment. Auction-ID: A1-48554-39
200 € 加入备选清单
Bench-mounted industrial belt sander, ideal for grinding, deburring and finishing operations in mechanical workshops or metal fabrications. This type of machine, also known as a backstand or belt grinder, is widely used for metalworking, allowing for precise and fast material removal. The set is ready to be used as a complete workstation with a heavy-duty workbench, making it an ideal solution for: Mechanical workshops Boilermaking locksmith Industrial maintenance Production and manufacturing The vertical abrasive belt allows you to work efficiently on different types of workpieces, especially for deburring and preparation before welding. Auction-ID: A1-48554-37
Number of sanding units: 2 st.sanding width: 190 mmSanding height max.: 4-150 mmHess Junior single wood sanding machine--------------------------------Machine in checking process at the moment!Basic structure:Stable, heavy welded construction made of thick-walled rectangular hollow profiles with additional, statically calculated reinforcements for optimalVibration dampening.Staggered grinding units with large dimensionsBelt drive drums for slip-free belt running. Two-point suction for directand airborne dust extraction with integrated blow-off device. grinding unitsin heavy steel plate construction as the basis for vibration-damped,quiet tape running. All guides as a ball linear set on hardened andpolished waves. Permanent precision thanks to dust and dirt protectionthe ball linear sets. Contact roller and sanding pad in a balanced ratiofor sanding belt grain load. The large-sized drive ...
Number of sanding units: 2 st.sanding width: 190 mmSanding height max.: 4-180 mmHESS - GLORIA 2 BELT SINGLE WOOD SANDING MACHINE-----------------------------------------------------Manufactur ers description:-----------------------------------------------------Compa ct design designed according to modern principles. Quiet andvibration-free operation thanks to rigid, stable machine housing andspecial insulation. Work safety device in accordance with the EC Machinery Directive with the dust-tested certificate.Offset grinding units with large-dimensioned tension rollers forgood heat dissipation and stable sanding belt guidance. Sanding units withforced sanding belt oscillation. 2-point sanding dust extraction directlyon the sanding roller. Airborne dust extraction on the large tension rollers. Integratedsanding belt blower for longer service life of the sanding belts. Integrated brushing an ...
Number of sanding units: 4 St.sanding width: 190 mmSanding height max.: 180 mmControl: ja weight: 3300 kgDimensions (L/W/H): 2600x920x1890 mmDust suction hood: 2x180, 2x120 mmLöwer DSM 2004 Double-Sided Sanding Machine---------------------------------------------4-Belt Sander + Disc Unit (Top/Bottom)Manufacturers Description:--------------------------------------------- Double-sided, four-belt, single-wood sander for sandingsolid wood such as window frames, etc.Highly stable, top-quality design with innovative details. Suitable for highcontinuous loads, even with high material removal rates.- Sequentially arranged grinding units for roughing, fine grinding,and finishing, each from above and below1. Belt grinding unit with heavy steel roller2. Belt grinding unit with rubberized roller and shoe3. Finishing unit with fiber brush (see optional equipment below)- Direct-drive grinding rollers ...
Number of sanding units: 8 St.sanding width: 25-240 mmSanding height max.: 15-140 mmB ROBA Fentech, Fully automatic sanding machineDesigned for sanding individual wooden components in window manufacturing, it is suitable for the following applications:- Fine sanding of wood- Sanding after impregnation- Intermediate lacquer sandingAdvantages of the ROBA Fentech system:- Automatic workpiece detection via scanner at the machine infeed- Motorized positioning of sanding units- Oscillating side units optimize abrasive utilization- 400 mm diameter sanding tools optimize sanding quality- Angled profiles are sanded at their optimal angle- Can be used as a straight-through machine or in reversing mode for one-person operation- Vacuum transport system for processing short parts- Enclosed design for enhanced workplace safety and a dust-free environment- Compact, space-saving design- Freely selectabl ...
Number of sanding units: 10 St.sanding width: 25-240 mmSanding height max.: 15-140 mmMB ROBA Fentech ORBITAL, fully automatic sanding machineDesigned for sanding individual wooden components in window manufacturing, it is suitable for the following applications:- Fine wood sanding- Impregnation sanding- Intermediate lacquer sandingAdvantages of the ROBA Fentech principle:- Automatic workpiece detection via scanner at the machine infeed- Motorized positioning of sanding units- Oscillating side units optimize abrasive utilization- 400 mm sanding tool diameter optimizes sanding quality- Angled profiles are sanded at their optimal angle- Can be used as a through-feed machine or in reversing mode for one-person operation- Vacuum transport system for processing short parts- Enclosed design for enhanced workplace safety and a dust-free environment- Compact, space-saving design- Freely selectabl ...
Number of sanding units: 4 st.sanding width: max. 200 mmSanding height max.: 7-150 mmWorking speed: 8-16 m/minBand Speed: 18-30 m/secStähle-Hess Sanding Machine Saturn-Duo-----------------------------------------------Manufacturers Technical Description:Stähle-Hess Finish Sanding Machine, Model Saturn DuoFeaturing 2 sanding units, plus additional upper and lower Roto-Finishsanding units.1 Upper sanding belt1 Lower sanding belt2 Upper Roto-Finish sanding units2 Lower Roto-Finish sanding unitsWorkpiece DimensionsHeight: 7–150 mmWidth: max. 200 mmMinimum length: 300 mmBelt speed: 18–30 m/s (variable)Feed rate: 8–16 m/min (variable)-----------------------------------------------Price for the above-mentioned machine available upon request!-----------------------------------------------Note: This machine was previously used in conjunction with aWeinig Variomat four-sided planer/moulder ...
Number of sanding units: 2 st.sanding width: 300 mmSanding height max.: 300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of sanding units: 6 st.sanding width: 45-165 mmSanding height max.: 45-92 mmweight: 2200 kgEcoline Q-SAND 6For sale on behalf of a customer--------------------------------------------Full text as PDF attachment!Short description:Machine with infeed conveyor and automatic height detection.It has two grinding discs on top and two grinding discs on the bottom, each connected to a brush unit.Technical manufacturers description:Ecoline Q-Sand: the ideal grinder for squared timber and more.Designed to work on both sides of the workpiece with three-dimensional adjustment, the Q-Sand guarantees maximum precision and uniformity. It is equipped with grinding discs, flap brushes, and a double disc for more effective material removal, thus improving adhesion for subsequent treatments. The Q-Sand can be installed in a production line or, due to its complete operational autonomy, can also be us ...
Number of sanding units: 6 St.sanding width: 180 mmSanding height max.: 150 mmSTAEHLE Grinding Machine Type Gloria/Saturn E 180 RF-----------------------------------------Stähle Hess Finish Grinding Machine Type Saturn E 180 RF (formerly Gloria)with 2 grinding units, plus top and bottom Roto Finish grinding attachments.1 upper grinding belt1 lower grinding belt2 upper Roto Finish grinding attachments2 lower Roto Finish grinding attachmentsFor a detailed description, please see the accompanying PDF from the manufacturer.Sold on behalf of a customer.The images are from our archive and were taken before the machine was delivered to the customer.(Technical specifications according to the manufacturer - without guarantee!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
条带宽度： 75 毫米带长： 2000 毫米带速： 37 m/min总功率要求： 3 kW机器重量： 0,084 t机器尺寸： 1x0,5x1 m
条带宽度： 75 mm带长： 2000 mm带速： 37 m/min总功率要求： 3 kW机器重量 CA.： 0.11 t机器尺寸CA.： 1x0.5x1 m
Number of sanding units: 1 st.sanding width: 150 mmSanding height max.: 150 mmLoewer edge finishing machine MiniSpin NMachines for finishing and fine sanding ofEdges and profiles with a grinding spindlehorizontal or vertical.Motor 0,75 KWSpindle in vertical position for machining edgesPivoted spindle in horizontal position, laterallyetc. for processing longer profile bars orConjunction with a combined grinding head for grindingof edges with a grinding disc bladesGrinding head swiveling + / - 20 ° for editingoblique linesWorking height / width 150 mmmax. Diameter roller / brush
