Dorst TPA 12是一款二手机械粉末压实机，非常适合多种工业应 。最大压榨力为120千牛，回抽力为80千牛，非常适合 苛的操作环境。该机器装填高度可达70毫米，冲压行 程35毫米，兼具灵活性和效率。其上冲压行程为100毫 ，可根据不同冲压需求进行调节，能够每分钟执行6 32冲程。该冲压机设计注重高效运行，每分钟约需60 压缩空气，连接负载约6千瓦。其紧凑而坚固的设计 寸约为2200毫米宽、1400毫米深、2550毫米高，总重量220 0公斤
Dorst TPA 15 是同类中最坚固的机械粉末压实机之一。其最大压榨 为150千牛，抛出力为80千牛，适用于多种工业应用。 该机器的填充高度可达110毫米，冲压行程为55毫米。 作灵活性通过150毫米的上抛出行程和80毫米可调行程 升。其高效运行速度范围为每分钟6至32冲程，最大 生产吞吐量。该压机需要约80升/分钟的压缩空气供应 ，总连接负载约为15千瓦。坚固耐用的Dorst TPA 15单元宽约2200毫米，深约1400毫米，高约3250毫米，重 约3200公斤
Dorst TPA 50是一款二手机械粉末压实机，设计注重精度和效率 非常适合要求高的工业应用。最大压榨力为500千牛， 最大回水力为400千牛，该机器既坚固可靠。最大装填 度为180毫米，压榨行程可达90毫米。该机设计为多功 能，具有120毫米的上冲冲行程和220毫米可调节冲程， 作速度范围为每分钟7至32冲程。该机器需要约200升/ 钟的压缩空气供应，总连接负载约为18千瓦。其坚固 结构占地面积约2000毫米宽、1700毫米深，高度3250毫米 总重约5500公斤
SPIERTZ F2E32-22 320T机械冲床于1982年在德国制造。该机器设计用于汽 和机械工业中零件的批量和批量生产。它支持金属冷 成形，如开胚、冲压和大型零件成型。所有这些操作 以320吨的压迫力完成。SPIERTZ F2E32-22冲床的驱动系统基于飞轮和偏心齿轮，将轴的 转运动转换为滑块的往复运动。这一解决方案确保了 机器平稳运行和高加工重复性。工具通过定位销放置 工作台上，然后用螺栓固定在工作台和滑块上。SPIER TZ F2E32 320T冲床还以其刚性设计著称，确保在严苛的生产条件 下可靠运行。 SPIERTZ F2E32-22印刷机的技术规格 - 最大压力：320吨 - 工作台面积（长 x 宽）：2130 x 1320 毫米 - 滑块行程：400 毫米 - 滑块调节：325毫米 - 滑动次数：17-29次/分钟 - 滑块尺寸（长 x 宽） ...
MOSSINI PDM/4B 1000T 机械印刷机由意大利 Mossini SpA 于2009年制造。该机器设计用于精密的包胚、冲压和成 型大尺寸部件。高压迫力和广泛的加工能力使冲床非 适合汽车和机械行业等行业的零部件大规模生产。 MOSSINI PDM/4B 1000以其高压力（1000吨）著称。其驱动系统基于飞轮 偏心变速箱，配合四连杆协同。该方案实现了扭矩的 均匀传递和滑块运动的平稳控制。工具通过中心销放 在工作台上，并用夹具固定，工具则用螺栓固定在 块上。工作台可以移到冲床工作区外，用于模具的组 装或拆卸，以及准备和维护工作。 MOSSINI PDM/4B/1000 1000 1000 吨冲压机配备了可动和固定液压模具垫。该方案增强 冲压机的功能，并支持需要从工作台侧控制下压力 操作。因此，该机床可 ...
BENELLI PEZM/800/600/4P 800T 机械印刷机于1971年在意大利制造。该机器专为金属的 精密冷加工而设计。它支持执行如清空、冲压和大型 件成型等要求高的操作。其800吨的高压迫力加上广 的加工能力，使其成为专注于汽车和机械行业零件大 规模生产的工业工厂的理想选择。 BENELLI PEZM/800/600/4P 采用基于飞轮和偏心变速箱的驱动系统，将轴的旋转 动转换为滑块的往复运动。该方案确保在后续生产 期中顺畅且可重复地运行。工具通过定位销放置在工 作台上，然后用螺栓固定在工作台和滑块上。BENELLI PEZM 800t冲压机还采用了刚性设计，确保在严苛的生产条件 下可靠运行。 BENELLI PEZM/800/600/4P 印刷机的技术规格 - 最大压力：800吨 - 工作台尺寸（长 x 宽）：3550 x 2500 毫米 - ...
二手
数量 1 二手压机，用于生产铝罐和铝盘 MFC.： SITI 建成时间：2005 年 由专家续签 持续时间：3-4 个月 力：4000吨铝盘生产&感应锅 花盆高度： 120 / 140 mm 该压力机将进行大修和改造，并按以下规定出售： 气缸新活塞磨削新法兰台改造 新泵 新垫片等 新的电气和电子零件 新程
4.000 € 加入备选清单
General Description Mechanical stamping press manufactured by ILR, designed for heavy-duty metal forming and stamping operations. The machine has been fully modernized with a PLC control system and is suitable for manual or automatic operation with a sheet feeder. Technical Details Manufacturer: ILR Machine type: Mechanical press Year of manufacture: 1972 Year of refurbishment: 2024 Press force: 250 t Stroke rate (manual): 45 strokes/min Stroke rate (automatic): 20 strokes/min Table size: 1,120 × 740 mm Stroke: 400 mm PLC-controlled digital operating system Operating modes: • Automatic with sheet feeder support • Foot pedal control • Two-hand control Safety light curtains installed Condition Used industrial condition. The machine was refurbished in 2024 and upgraded with a modern PLC control system. Equipped with safety light curtains and multiple operating modes. Operational st ...
100 € 加入备选清单
• Pneumatic press • Table dimensions 125 x 125 mm • Actuating by pedal • Operating conditions of this machine: unchecked. • Transport dimensions approx. 1200 x 800 x 600 mm. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-50834-118
pressure: 1000 tdistance between columns: . mmstroke: . mmtotal power requirement: . kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of saleapply exclusively.About us More than 400 of our own machines in stockOver 15,000 m² of storage space, 70 t crane capacityMore than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours arepossible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The Dorst TPA 20/3 is a reliable used powder compaction press known for its robust construction and precise operations. It offers a maximum pressing force of 200 kN and a withdrawal force of up to 100 kN. With a maximum filling height of 140 mm and pressing travel extending to 70 mm, it accommodates a range of powder compaction tasks efficiently. The press is capable of operating at speeds ranging from 5 to 22 strokes per minute, supporting a variety of production needs. It features an upper punch stroke of 200 mm, with an adjustable travel of 160 mm for flexibility across different applications. The machines air supply intake is approximately 160 liters per minute, and it has a connected load of about 15 kW. Constructed with dimensions of around 2000 mm in width, 1700 mm in depth, and 3250 mm in height, the Dorst TPA 20/3 weighs approximately 4,900 kg. It maintains a workplace sound lev ...
The Dorst TPA 70 is a used powder compaction press, known for its precise and reliable performance. It delivers a maximum pressing force of 700 kN with a withdrawal force of 400 kN, making it suitable for diverse compaction needs. The machine features a pressing travel of up to 30 mm, with a maximum filling height of 70 mm and operates at speeds between 14 to 40 strokes per minute. This ensures efficient throughput, ideal for high-demand production environments. With an upper punch stroke of 120 mm and adjustable travel of 200 mm, the Dorst TPA 70S offers flexibility in application. It requires a compressed air supply with an intake of approximately 200 liters per minute, and operates on a total connected load of about 20 kW. To enhance functionality, the machine is constructed robustly, maintaining a workplace-related sound level of 78 dB(A), and features a press housing capacity of 190 ...
The Dorst TPA 15/3 is a used mechanical powder compaction press designed for precision and efficiency in industrial applications. It provides a maximum pressing force of 150 kN and a withdrawal force of 100 kN, supporting a variety of compaction tasks. With an upper punch stroke of 100 mm and a range of 70 mm for adjusting the travel, this machine offers flexibility for different requirements. Operating at speeds of 7 to 32 strokes per minute, it ensures a reliable production throughput. This press allows for a maximum filling height of 70 mm and pressing travel up to 35 mm, suitable for a range of powder compaction needs. The machine is fitted with a compressed air system that has an intake of around 70 liters per minute and a total connected load of approximately 6 kW. It is compact yet robust, with dimensions of about 1400 mm in width, 1300 mm in depth, and 2650 mm in height, weighing ...
The Dorst TPA 6 is a used mechanical powder compaction press suitable for various industrial applications due to its robust performance and flexibility. It boasts a maximum pressing force of 60 kN and a withdrawal force of 30 kN, addressing a wide range of compaction needs. The machine supports a maximum filling height of 70 mm and a pressing travel of 30 mm, with an upper punch stroke of 95 mm and an adjustable travel of 50 mm. This ensures precise control over the compaction process. Operating at speeds between 7 to 32 strokes per minute, the Dorst TPA 6 consumes approximately 70 liters of compressed air per minute and has a total connected load of about 3.5 kW. It measures 2220 mm in width, 1060 mm in depth, and 2250 mm in height, weighing around 1,200 kg. With a gear oil capacity of 12 liters and a workplace-related sound level of 75 dB(A), it is designed to endure continuous use whi ...
The Dorst TPA 50/4 is a reliable, used mechanical powder compaction press designed for precision and efficiency. Offering a robust maximum pressing force of 500 kN and a maximum withdrawal force of 400 kN, it supports a variety of powder compaction tasks. With a filling height up to 180 mm and a pressing stroke of up to 90 mm, this machine is adaptable to diverse requirements. Equipped with an upper punch stroke of 120 mm and an adjustable travel of 220 mm, the Dorst TPA 50/4 provides flexibility for different applications. It operates at a speed of 7 to 32 strokes per minute, ensuring efficient production. The press requires a compressed air supply, consuming approximately 200 liters per minute, with a total connected load of around 18 kW. Constructed with durability in mind, the press measures approximately 2000 mm in width, 1700 mm in depth, and 3250 mm in height, and weighs around 5, ...
The Dorst TPA 5 is a refurbished mechanical powder compaction press, designed for precision and efficiency in industrial applications. It offers powerful performance with a maximum pressing force of 50 kN and a withdrawal force of up to 40 kN. This makes it suitable for a variety of powder compaction tasks, with a filling height of 50 mm and pressing travel capability of 25 mm. This machine provides flexibility with an upper punch stroke of 85 mm and an adjustable travel span of 70 mm, operating at 6 to 30 strokes per minute. It consumes around 50 liters of compressed air per minute and has a total electrical load of approximately 4.00 kW. With durable construction, the Dorst TPA 5 maintains a quiet operation at a sound level of 70 dB(A). The presss compact dimensions, approximately 1200 mm in both width and depth and a height of 2150 mm, with a weight of about 1,200 kg, make it a manage ...
CONTROLS PLC SIEMENS S7 PRESS DESIGN drive system: knuckle-joint frame design: H-frame, monoblock openings in uprights: yes number of suspensions: 2 feedstock transport direction: left to right PRESS FORCES total force (nominal): 315 to nominal work capacity: 38 kNmPRESS TABLE table surface (left-right): 2000 mm table surface (front-back): 1200 mm thickness of bolster plate: 200 mmSLIDE slide force: 315 to table surface (left-right): 1995 mm table surface (front-back): 1100 mm stroke: 160 mm stroke rate (max.): 80 /minSLIDE (MECHAN. PRESS) slide adjustment: 140 mm stroke rate (min.): 20 /min stroke rate (max.): 80 /min main drive power: 90 kWTOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 555 mm distance between columns (H-frame): 2060 mm passline opening (free passage in side columns): 1060 ...
Mechanical Dorst TPA 45, Pressing Force max. 450 Kn, Withdrawal force max. 250 Kn, Supporting force in pressing position max. 130 Kn, Die return force max. 60 Kn, Upper punch stroke 120 mm, Upper punch adjusting travel 70 mm, Number of strokes 6-22 1/min, Filling height max. 120 mm, Pressing travel max. 60 mm, Withdrawal travel max. 60 mm, Top pressing travel max 6 mm, Upper punch pneumatic preload max. 30 mm, Compressed air supply , Air consumption , Intake air aprox. 70 l/min, Total connected load aprox. 14,0 Kw, Press dimensions:, Width aprox. 1550 mm, Depth aprox. 1650 mm, Height aprox. 2200 mm, Weight of the press aprox. 3900 Kg, Oil filling quantity :, Press housing 45 l (gear oil), Workplace-related sound 79 dB (A)
Pressing Force max: 1400 Kn, Withdrawal force max: 1100 Kn, Die return force max: 70 Kn, Upper punch stroke: 220 mm, Upper punch adjusting travel: 220 mm, Number of strokes: 5-18 1/min, Filling height max: 180 mm, Pressing travel max: 90 mm, Withdrawal travel max: 90 mm, Top pressing travel max: 18 mm, Total connected load aprox: 25,0 Kw, Width aprox: 1950 mm, Depth aprox: 1750 mm, ISO 9001: 2008 CERTIFIED COMPANY, Height aprox: 4380 mm, Press housing: 240 l (gear oil), Workplace-related sound: 78 dB A
