折弯工具 (57)

Key data: 2140 mm

功率：最大1.2毫�

: gebraucht : WA0089 : 142 €: 1 : 835 mm: 1 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 2000 mm, 500 mm, 500 mm

手动弯曲工作台，长2米，带可伸缩底座，便于安装在 运输车�

: gebraucht : WA0013 : 265 €: 1 : 835 mm: 80 mm: 12 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Omschrijving Lengte mm Aantal Bovenmes H=66.5mm，R=0.8 85gr 835 2 Bovenmes H=66.5mm，R=0.8 85格令 415 2 Bovenmes H=66.5mm，R=0.8 85gr 300 1 Bovenmes H=66.5mm，R=0.8 85gr 150 1 Bovenmes H=66.5mm，R=0.8 85gr 50 1 Bovenmes H=66.5mm，R=0.8 85格令 40 1 Bovenmes H=66.5mm，R=0.8 85gr 20 1 Bovenmes H=66.5mm，R=0.8 85gr 15 2 Bovenmes H=66.5mm，R=0.8 85gr 10 1 Bovenmes H=66.5mm，R=0.8 85gr 左100 1 Bovenmes H=66.5mm，R=0.8 85格令 右 100 1 Ondermatrijs V10， R=0,8， 85gr 835 2 Ondermatrijs V10， R=0,8， 85gr 415 2 Ondermatrijs V10， R=0,8， 85gr 300 1 Ondermatrijs V10， R=0,8， 85gr 150 1 Ondermatrijs V10， R=0,8， 85gr 50 1 Ondermatrijs V10， R=0,8， 85gr 40 1 Ondermatrijs V10， R=0,8， 85gr 20 1 Ondermatrijs V10， R=0,8， 85gr 15 2 Ondermatrijs V10， R=0,8， 85gr 10 1 托塔尔 26 价格2250欧元,-- 新prijs € 3250,--

: gebraucht : WA0052 : 292 €: 1 : 835 mm: 80 mm: 16 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

阿玛达HFE 80-25 年份：1999年11月 工作长度：2550毫米 支架宽度：2125毫米 压力：80吨 CNC控制：AMADA 操作员II图形 受控轴：Y1/Y2;X1/X2;R1/R2;Z1/Z2 莫特。可调节背规 行程：200毫米 投影：420毫米 加冕 工作高度：960毫米 发动机功率：9千瓦 CE标志 尺寸（长 x 宽 x 高）：约 3000 x 2250 x 2250 毫米 重量：约6吨

: gebraucht : WA0053 : 292 €: 835 mm: 80 mm: 16 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

折弯工作台 盖卡 最大宽度 2.03 m 厚度 1 毫米 比例 180° 弯曲梁弹簧辅助 长度 2.40 米 宽度 0.80 m 高度 1.10 m 重量 500 kg

: gebraucht : WA0054 : 292 €: 1 : 835 mm: 80 mm: 16 mmMint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

折叠凳TEKO 板材厚度 1.9 毫米 可用长度 2025 mm 长度 2500 mm 宽度 650 mm 高度 1080 mm 重量 500 kg

: gebraucht : WA0145 : 840 €: 1 : 3100 mm: 40 mm: 115 mmslightly crankedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

手 - 弯曲工作台 制造商： 盖�

: gebraucht : WA0008 : 325 €: 1 : 835 mm: 120 mm: 12 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

规格： - 压力容量 2000 kN - 最大工作宽度 3100 mm - 支架通道 3200 mm - 立柱放电 300 mm - 最大安装高度 965 mm - 行程或偏移深度无级可调 0 - 400 mm - 冲压速度前进 + 返回每 100 毫米/秒 - 工作速度可在9个步骤中选择 1 - 10 mm/sec - 驱动 400 V / 26.5 kW - 空间要求约为 宽 4400 x 高 3500 x 深 2200 mm - 重量约 18500公斤 - 与： - CNC - 控制赛贝莱克ModEva 15S制造于2007年 - 后备考格与4个受控的肺。侧面的 和高度可调的停止手指 - 停止区域中受控的弯曲辅助装置 - 海德。- 肺。上部刀具 + 下部刀具的夹紧 - 莫特。表冠/水力垫 - 横向可移动的支撑臂 - E - 脚踏开关 - 剖分式刀具 R 1-100 t/m，分体式模�

: gebraucht : WA0066 : 860 €: 1 : 550 mm: 220 mmmint conditiondividedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

规格： 最大工作长度 1250 mm - 支架通道 1050 mm - 最大压力 80 t - 行程 250 mm - 立柱放电 300 mm - 工作台之间的安装高度 - 压梁 560 mm - 提升速度 - 下降速度怠速最大 100 毫米/秒 - 上升速度 100 毫米/秒 - 最大向下按压速度 12 毫米/秒 - 总驱动功率 15 kW - 空间要求约为 宽 1750 x 高 3400 x 深 2000 mm - 重量约 8500公斤 - 与： - 数控 - 控制赛贝莱克 DNC 7400 PSGY - 受控 X – 后挡风口 5 – 1000 mm - Z - 三阶段气的轴。高度可调 - 手动移动和可折叠的停止手指 - 受控气动模具位移 - 海德。刀具夹紧 - 手动加冕 - 2件式支撑臂 - 刃磨刀具开口高 320 x 长 1000 mm - 鹿脚工具高 320 mm x 长 1000 mm - 通用矩阵 L 1000 mm

: gebraucht : WA0067 : 860 €: 1 : 515 mm: 220 mmmint conditiondividedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: Italien Eurostamp Tooling is quality,competence and precision.Since 1970, we have been producing exceptionally precise tools and offering extremely high-quality solutions for all those customers who constantly require the highest level of performance and reliability.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0187 : prompt, Zwischenverkauf v : 2912 €: 1 mint condition3 x 835 + 1 x 835 mm sectionedATTENTION: 50T toolThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0138 : 1960 €: 1 : 3100 mm: 200 mmslightly crankedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0032 : 228 €: 1 : 835 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0149 : 690 €: 1 : 3010 mm: 24 mm: 160 mm: 10 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0137 : 1960 €: 1 : 3000 mm: 190 mmslightly crankedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 00821 : prompt, Zwischenverkauf v : 1210 €: 1 : 805 mm88°, R=0.6MM H=115MM, Split into left horn section 100/370/10/15/20/40/50/100/100 mm, right horn section, made from 42CrMo4 tool steel, induction-hardened to 54-60 HRC,polishedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0043 : 129 €: 1 : 835 mmPhase: 1 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0031 : 228 €: 1 : 835 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0088 : 290 €: 1 : 835 mmdividedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: WA0136 : 3150 €: 1 : 8 mm: 3 x 1.000 & 1 x 1.050 mmcomplete 30°The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0022 : 288 €: 1 : 415 mm: 6 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0041 : 790 €: 1 : 835 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 125 mmplate thickness: 2 mmstraightening feed: 5-30 m/mintotal power requirement: 1,5 kWweight of the machine ca.: 460 tSheet width: 125 mmSheet thickness: 2 mmStraightening speed: 5 – 30 m/minTotal power requirement: 1.5 kWMachine weight: approx. 460 kg(The value 460 t is almost certainly a typo, based on this machine size, 460 kg is the plausible specification.)Strip infeed height: 1,250 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 0,5...5 mmpunching force: 20 ttravel -x axis: 1250 mmtravel -y axis: 750 mmnumber of strokes: 20 per minram stroke max. - stepless: 40 mmtotal power requirement: 14 kWweight of the machine ca.: 5 t- max. thickness: 0,5 … 5 mm- travel in X : 1250 mm enlargeable to 2000 mm- travel in Y axis: 750 mm enlargeable to 1000 mm- number of strokes: 20 per min- stroke: 40 mm - Stanz- Ø 100 mm 1,5 mm-( punch diam. and thickn.) Ø 50 mm 3,5 mm Ø 16 mm 12,0 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0125 : 122 €: 1 : 835 mm: 0,4 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 500 mmmaterial thickness: 0,8-5 mmno. of straightening rolls: 7 sheet width: 500 mmplate thickness: 0,8 - 5 mmstraightening roll diameter: 80 mm2 pinch rolls, diameter: 80 mmAdjustable entry heightPass line: 505 mmOiling systemRoller cageStrip guide: 505 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0127 : 1230 €: 1 : 2500 mm: 70 mm: 70 mm: 8/11/12/16/24/36 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0011 : 292 €: 1 : 835 mm: 80 mm: 12 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0012 : 292 €: 1 : 835 mm: 80 mm: 12 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0151 : 217 €: 1 : 835 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 3100 mmheight: 120 mmwidth: 120 mm Brand New Die Block List Price: 9.738 Euro Special Price on RequestV-Openings:- 80.0 mm / 85° / R 10.0 with guide rollers- 50.0 mm / 85° / R 5.0 with guide rollers- 35.0 mm / 85° / R 4.0- 22.0 mm / 85° / R 2.5- 2x Mounting Screws incl. Link ChainThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0007 : 217 €: 1 : 835 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0039 : 180 €: 1 : 415 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0143 : 690 €: 1 : 3100 mm: 90 mm: 25 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0102 : 292 €: 1 : 835 mm: 80 mm: 25 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0147 : 890 €: 1 : 3050 mm: 105 mm: 85 mm(screwed 5x from above)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1 Bending tools with excellent value for moneyInduction hardened, with ground working surfacesStandard lengths: 835 mm, 415 mm and 835 mm (split).For tool clamping systems such as: Amada, Promecam, Euro, Durma, Baykal, Ermaksan, Dener and many moreThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0178 : 279 €: 1 : 835 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0181 : prompt, Zwischenverkauf v : 1800 €: 1 : 3100 mm: 160 mm: 45 mmmint condition86° Slightly cranked, planedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0042 : 950 €: 1 : 835 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.