模下沉式电加工机 制造商：Exeron。 类型：312 制造年份：2004 控制MF10 行进路径 X/Y/Z：450 x 300 x 300 毫米 工作台：820 x 400 毫米 工作容器：900 x 520毫米 距离表/刺：150 / 450 毫米 最大电极质量：30 / 150 千克 最大工件重量：800 kg 注水高度工作槽：300毫米 20折换工具 发电机电流：60安培 电源：400 V 三相电流：50 Hz 功耗：8 kVA 整体尺寸 宽/深/高 约：1,910 x 1,798 x 2,300 毫米
1.500 € 加入备选清单
Technical data Basic machine Layout space (sqm): 12.3 Length (m): 3,5 Width (m): 3.5 Height (m): 3.0 Total weight incl. dielectric (kg): 6500 Connected load - 45/90 A generator (kVA): approx. 6/9 Connection voltage (V): 380 Connection: RST/MP/S Fuse - 45/90 A Generator (A): 25/35 Working current according to the generator (A): 45/90 Workpiece and electrode Permissible workpiece dimensions (mm): 900 x 900 Workpiece clamping area (mm): 900 x 900 Maximum permissible table load (kg): 1000 Max. permissible Electrode weight. with pneumatic clamp (kg): 100 Max. permissible Electrode weight. directly to quill (kg): 250 Min. distance between table and electrode holder (mm): 220 Max. distance between table and electrode holder (mm): 620 Work tank Mirror height of table (mm): 450 Width - inside (mm): 900 Length - inside (mm): 900 Max. capacity (l): 415 Clamping plate Length (mm): 900 Width (mm): 90 ...
Key data: 1000 A, 760 , 60
翻新的OPS Ingersoll Gantry 800 Eagle型压模机——技术和外观均保持最佳状态 这台机器经过我们公司全面且专业的检修，技术和外 都非常良好。 在大修过程中，超过70%的机器被拆解。所有相关磨损 件均经过仔细检查并在必要时更换，包括滚珠和驱 主轴。随后进行了完整的几何测量、校准及激光测量 系统的额外控制。 机器床和整个底座都被彻底清洁过。所有泵均被拆解 清洗并大修。所有软管，包括液压和压缩空气软管 均已全面更换。 此外，这台机器也经过了全面重新喷漆，外观上也非 整洁。 发电机和控制系统都进行了清洁和技术检查。发电机 空调也进行了清洁，以确保可靠的冷却和稳定的运 。 最后，机器根据OPS Ingersoll的质量和检验规范进 ...
600 € 加入备选清单
Machine type: CNC Die Sinking EDM Manufacturer: Sodick Model: AM35L Control: Sodick LN / LN1 control Year: n/a Serial number: n/a Working hours: n/a Table size: approx. 600 x 400 mm Axis travel (X/Y/Z): approx. 350 / 250 / 250 mm (typical for model) Process type: Die sinking EDM Generator: Sodick generator Tank: Integrated dielectric tank Control system: Sodick LN1 control with external monitor (KME) Data input: Floppy disk (2DD) interface Cooling system: External oil temperature regulator (Kanto Seiki Oilmatic) Pump system: Integrated dielectric pumps Accessories: Oil temperature unit, dielectric system, control unit Remarks: Machine in used condition. Control boots (system loading visible). Typical signs of use and dirt/oil residues. Equipped with external oil temperature control unit and dielectric system. Own mass: approx. 3,500 kg Dimensions (LxWxH): approx. 2,000 x 1,800 x 2, ...
Key data: 1000 A, 760 , 60
翻新的OPS Ingersoll Gantry 800 Eagle型压模机——技术和外观均保持最佳状态 这台机器经过我们公司全面且专业的检修，技术和外 都非常良好。 在大修过程中，超过70%的机器被拆解。所有相关磨损 件均经过仔细检查并在必要时更换，包括滚珠和驱 主轴。随后进行了完整的几何测量、校准及激光测量 系统的额外控制。 机器床和整个底座都被彻底清洁过。所有泵均被拆解 清洗并大修。所有软管，包括液压和压缩空气软管 均已全面更换。 此外，这台机器也经过了全面重新喷漆，外观上也非 整洁。 发电机和控制系统都进行了清洁和技术检查。发电机 空调也进行了清洁，以确保可靠的冷却和稳定的运 。 最后，机器根据OPS Ingersoll的质量和检验规范进 ...
2.000 € 加入备选清单
Type: Die-Sinking EDM Machine (Spark Erosion) Brand: Sodick Model: AQ55LR Control: Sodick LN1 Controller Application: Precision die-sinking EDM for mold & tool making Equipment: - Dielectric tank with working table - Z-axis head with electrode holder - CNC control unit with screen & keyboard - Manual control pendant - Integrated dielectric filtration system - Machine enclosure / splash guards Technical Data: - Axes: X / Y / Z (CNC controlled) - Control: LN1 Condition: Used Auction-ID: A7-45993-67
Key data: 750 mm, 650 mm, 60 A
翻新的OPS Ingersoll Gantry 500 Eagle型压模下沉EDM机——无论技术还是外观都保持最 状态 这台机器经过我们公司全面且专业的检修，技术和外 都非常良好。 在大修过程中，超过70%的机器被拆解。所有相关磨损 件均经过仔细检查并在必要时更换，包括滚珠和驱 主轴。随后进行了完整的几何测量、校准及激光测量 系统的额外控制。 机器床和整个底座都被彻底清洁过。所有泵均被拆解 清洗并大修。所有软管，包括液压和压缩空气软管 均已全面更换。 此外，这台机器也经过了全面重新喷漆，外观上也非 整洁。 发电机和控制系统都进行了清洁和技术检查。发电机 空调也进行了清洁，以确保可靠的冷却和稳定的运 。 最后，机器根据OPS Ingersoll的质量 ...
1.600 € 加入备选清单
Make: Sodick Type: CNC Die Sinking EDM Machine Model: AQ35LR Control: Sodick LN1 Controller model: LQ3 Technical data: - Axes: 3 (linear) - Working tank: Die-sinking EDM - Table size: approx. 600 x 400 mm (estimated) - Z-axis display visible on control Equipment: - Sodick LN1 CNC control with keyboard & monitor - Integrated dielectric system - Tooling system (Walker-Hagou fixture visible) - Electrode changer / tool rack - Pressure gauges and flushing system - Manual control pendant Condition: Used Auction-ID: A7-45993-52
Key data: 1770 A, 1220 , 70
OPS INGERSOLL EDM 机器 GANTRY 1200 HSJ / 64 位，建于2006年，经过我们公司全面且专业的检修，技 术和外观状况都非常好。 在大修过程中，超过70%的机器被拆解。所有相关磨损 件都经过仔细检查。 上述机器进行了以下大修工作： 更换了X、Y和Z轴的滚珠螺杆和滚珠轴承。 更换了坦克驱动的所有（4个）滚珠螺丝。 C轴的检查与测试，以确保紧密性和准确性 根据OPS INGERSOLL协议对所有轴进行几何验证。 对整个机器底座进行基本清洁。 清理整个工作水箱，包括更换毡刮刀。 机器的完整喷漆。 介电泵大修。 更换所有液压和介电管线。 更换所有气动电缆。 清洗控制柜、发电机和控制系统。 更换所有风扇和电池。 如有必要进行大修，更 ...
500 € 加入备选清单
EDM machine. Serial: 203Estimated weight: 2000 kg Approximate package dimensions: 2300x1900xh2100 and 1200x800xh2200 mm Auction-ID: A7-46655-165
Key data: 500 mm, 400 mm
Roboform 350 + Erowa 机器人包 44折电极更换器 这款模下沉式EDM机具备多种精密加工能力。 详情： 2006年 行程：X/Y/Z 350 x 250 x 300 mm 最小功耗：5 kVA 最大电极重量：25公斤 配件： 包括Erowa零点夹紧系统安装在桌面上 无电极支架
5.000 € 加入备选清单
According to photos, machine is no longer connected to the power and the liquids are emptied for transport. Documents are available electronically Auction-ID: A1-45666-4
由于一项新的收购，我们在这里出售我们的电火花成 系统。 这是当时MATRA公司销售的机器。这是一台 DECKEL DE35C。 与此同时，Exeron 公司接管了这项服务。 行程为：X=600mm Y=400mm Z=400mm 电火花成型系统具有 4 倍电极更换器 机器上的控制系统最近进行了大修，电源和UPS也进行 更新。 在发生故障时，Exeron公司还对机器进行了持续的检查 维护。 机器正在运行，并且仍处于通电状态以进行可能的测 。 营业时间为：33196小时。 各种刀架可以成为价格谈判的一部分
4.000 € 加入备选清单
Elotherm P1F die-sinking EDM machine, built in 1999, with CNC control and digital control panel. Machine with large working basin (basin size approx. 1900 × 1300 × 500 mm), control panel with integrated keyboard, screen and additional hand control unit (Elotrace). Extensive peripheral system with external filter technology: Franken Filtertechnik KG Type RF 70 Built in 1999 Volume 250 l Permissible operating overpressure 6 bar Permissible operating temperature 60 °C. Multi-stage filter unit, pump system and piping available. Integrated CO₂ extinguishing system with appropriate safety devices. Visible used condition with signs of wear due to age and duration. The system was in productive use in tool and mould making. Operating hours: 70,779.0h Auction-ID: 04D-XKW-4
500 € 加入备选清单
Manufacturer: System 3RType: Clamping Plate / Grid PlateSystem 3R Clamping Plates Lots – 2 pieces (3R-935-56.40-02 / U-20034)Description:Lot consisting of 2 clamping plates for System 3R clamping systems.The plates have the typical 3R raster pattern for holding chucks, electrode holders and fixtures in tool and mould making. Suitable for use on die-sinking EDM machines and fixtures with System-3R mounting.Manufacturer: System 3RSystem: 3RType: Chipboards / Grid PlatesPlate 1Type: 3R-935-56.40-02Size: approx. 560 × 400 mmPlate 2Type: U-20034Size: approx. 350 × 250 mmMaterial: SteelCondition: used Auction-ID: A7-46417-402
控制 PC-NC”对话框 X/Y/Z 轴行程：1000/1510/700 mm C 轴 30 倍电极更换器 Hirschmann 夹紧系统 支承面 宽 x 深 1140/1640 毫米 负载能力 7500 kg 过滤系统 灭火系
500 € 加入备选清单
\"Manufacturer: EROWAType: ITS Electrode HolderEROWA ITS Electrode Holder Lot – 74 pieces + accessoriesLarge lot consisting of a total of 74 EROWA ITS electrode holders as well as additional accessories.The holders are used to pick up and position electrodes in tool and mould making on die-sinking EDM machines. The lot includes various designs such as standard electrode holders, round holders, special holders and other accessories such as clamping and adjustment parts. Compatible with EROWA ITS clamping systems and corresponding chucks.Scope of delivery as shown in the pictures. • Manufacturer: EROWA • System: ITS • Application: die-sinking EDM / EDM • Number of electrode holders: 74 pieces • additional: various accessories • Material: brass / steel / copper • Origin: Switzerland • Condition: used\" Auction-ID: A7-46417-401
X、Y、Z轴行程：600x400x400 mm 机器尺寸 WxDxH ： 1600x2700x2858 mm 机器重量 ：440 kg 工件尺寸 WxDxH ：1000x700x400 mm 最大电极重量：100kg 最大工件重量 1000 kg
2.500 € 加入备选清单
AEG ELOTHERM P1 CNC die-sinking EDM machine. Robust, heavy-duty industrial plant in gantry design with solid casting machine bed and large working area. Generous basin dimensions for machining large workpieces in tool and mould making. Stable work table with T-slots for picking up heavy molds and dies. Equipped with original ELO/AEG CNC control as well as classic pulse generator. Final drives via servo drives. Control cabinet fully stocked. Dielectric system with several pumps and central filter unit. Machine was in use with 72180h until the end. Signs of wear due to age present. Solid mechanical substance, suitable for applications in large-scale mold making and one-off production. Auction-ID: 04D-XCJ-4
Key data: 572 mm, 400 mm, 32 A
电火花成形机床 x 350 毫米 y 250 毫米 z 315 毫米 测距表 - 套筒 550 mm 卡盘 3R 宏 侵蚀电源模块 EPO 灭火系统 数据 电介质 250 升提取 长度 1.75 米 宽度 2.10 米 高度 2.53
250 € 加入备选清单
\"Manufacturer: EROWAType: ER-009380 / ER-007523EROWA Quick Chuck Automatic EDM Tool HolderAutomatic quick chuck from EROWA for use on die-sinking EDM machines.The holder is used for fast and reproducible clamping of electrode holders in the EROWA clamping system. Delivery includes original packaging and documentation from GF AgieCharmilles. • Manufacturer: EROWA • Type: Automatic quick-release chuck • Item numbers: ER-009380 / ER-007523 • Additional holder: ER-032815 • Application: Die-sinking EDM • System: EROWA clamping system • Machine: compatible with GF AgieCharmilles • Condition: very good used condition • Origin: Made in Switzerland\" Auction-ID: A7-46417-399
Key data: 750 mm, 500 mm, 64 A
编号 ： 5897 型号：机器人54P 制片人：夏米尔 创建时间：2000年 参数： 工作台尺寸： 750x500 mm 最大工作电流：64 A X 轴最大行程长度： 600 mm Y 轴最大行程长度：400 mm Z轴最大行程长度：450 mm 容器尺寸： 1200x775x385 mm 机器重量： 3000 kg 新来
250 € 加入备选清单
\"Manufacturer: EROWAType: ITS Electrode Holders / Clamping Blocks / Electrode HoldersEROWA ITS Electrode Holder Set – 38 piecesLarge lot consisting of a total of 38 electrode holders and clamping blocks for the EROWA ITS clamping system.The holders are used to pick up and position copper or graphite electrodes in tool and mould making on die-sinking EDM machines. The lot includes various designs such as electrode holder base bodies, clamping blocks and holders for individual electrode production.Compatible with EROWA ITS clamping systems and corresponding chucks. • Manufacturer: EROWA • System: ITS clamping system • Application: die-sinking EDM (EDM) • Number of parts: 38 pieces • Material: brass / steel • Origin: Switzerland • Condition: used, good condition\" Auction-ID: A7-46417-400
编号 ： 6445 型号： BF 74 制片人：CDM ROVELLA 生成时间：2008 年 参数： 工件长度： 800 mm 工件宽度： 550 mm X 轴行程长度： 700 mm Y 轴行程长度： 400 mm Z 轴行程长度： 350 mm 最大工作台负载：2000 kg 最大电极重量：90 kg 油箱尺寸： 1200 x 750 x 505 mm 重量： 4400 kg
150 € 加入备选清单
\"Manufacturer: Novotec / Intech EDMType / Name: Copper Threaded Electrodes for Die-sinking EDM M2.5 – M16 (various sizes) – Lotof copper threaded electrodes for die-sinking EDM machines (EDM) of various sizes.The electrodes come mainly from Novotec and Intech EDM and are intended for the EDM of threads (Thread EDM). The inventory includes several sizes from M2.5 to M16, some with flush bore and orbital design. The electrodes are mostly in original packaging or protective tubes and are unused or in stock. The electrodes are sorted by size and are located in storage boxes (M2.5 / M4 / M6 / M8 / M10 / M12 / M16).Copperthreaded electrodes consisting of different sizes: • M2.5 (with flush hole) • M4 x 0.70 orbital • M6 • M8 • M10 orbital • M12 • M16Partly in original packaging (Novotec) or protective tubes.Material: CopperApplication: Threaded EDM / die-sinking EDM (EDM)Typ ...
容量：120安培。– 19 千伏安 X轴： 800 mm Y 轴： 600 mm Z 轴： 400 mm 工作台尺寸：1，100 x 700 mm 扬程 - 工作台距离：950 mm（最大） 油保持架： 1，700 x 1，000 x 650 mm 工件重量：4，000 kg（最大） 控制：数控大斗S120
table length: 430 mmtable width: 300 mmx-travel: 260 mmy-travel: 160 mmz-travel: 300 mmweight of the machine ca.: 0,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
1.200 € 加入备选清单
Make: Sodick Type: CNC Die Sinking EDM Machine Model: AM3L Control: Sodick LN1 Technical data: - Working tank: Die sinking EDM - Table size: approx. 600 x 400 mm (estimated) - Axes: X / Y / Z - CNC control: Sodick LN1 Equipment: - Die-sinking EDM generator - Enclosed working area with safety guard - Control cabinet with monitor & keyboard - System 3R tooling interface - Oil unit (Oilmatic temperature regulator) - Dielectric filtration system Condition: Used Auction-ID: A7-45993-51
建设年份 2001 发电机多脉冲 - 70 安培 + 100 A 升压器 控制三菱32位 - CNC 行程（X、Y、Z） 900 x 1780 x 550 mm 工作外壳（宽 x 深 x 高） 1300 x 2200 x 730 mm 工件夹紧台（宽 x 深） 1150 x 2050 mm 附件 13 倍拾取式线性转换器， 二氧化碳灭火系统 状态 全面检
CONTROLS CNC controls TECHNICAL SPECIFICATION current generation (max): 3600 A Table-size : 660 mm Table-size : 540 mm Working head: electr.clamping surf.: 375 mm .. x: 545 mmDIMENSIONS / WEIGHTS space requirements -left/right-: 2200 mm space requirements -front/back-: 2560 mm total height: 2870 mmThe precision electrochemical metal machining (PECM) process is the further development of electrochemical countersinking. High-precision tools can also be machined from super alloys (Inconel, Hastelloy, etc.) and PM steels without process-related tool wear.Natural granite machine frameWorking area 800 mm x 640 mm (W x D)Machine table 660 mm x 540 mm (W x D)Maintenance-free precision work axis with direct driveFixture attachment via 6 T-slot rails (M10) in the machine tableReal-time system for process control and short-circuit detecti ...
table length: 840 mmtable width: 600 mmampere: 60-120 Atotal power requirement: 15-23 kVAweight of the machine ca.: 2,75 tdimensions of the machine ca.: 2760 x 1110 x 1840 mWith controlled C-axis and 16-position tool changer.WORKTABLETable size: 840 x 600 mmDielectric above table: 360 mmMaximum workpiece weight: 1000 kgT-slots: 4 x 10 mmDistance table to quill without chuck (max / min): 595 / 180 mmWORKHEADX - Y travel: 565 x 400 mmZ travel: 415 mmX - Y - Z resolution: 0.001 mmC-axis resolution: 0.001 deg.Rapid traverse speed: 800 mm/minMax. electrode weight without rotation: 100 kgMax. electrode weight with rotation: 15 kgDIELECTRIC SUPPLYTank volume: 400 litersPaper candle filters: 4 piecesGENERATORDimensions (height x width x depth): 1800 x 600 x 920 mmWeight: 300 kgRated current: 60 – 120 APower rating: 15 – 23 kVADimensions (height x width x depth): 2760 x 1110 x 1840 mmWeight: ...
CONTROLS CNC controls TECHNICAL SPECIFICATION Case size: 860 mm .. x: 620 mm Adjustment of x-axis: 350 mm Adjustment of y-axis: 250 mm Erosion stroke: 350 mm Max. dist. table-electr.clamp.surf.: 520 mmELECTRICAL SPECIFICATIONS mains power supply: 8.3 kVA mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 2700 mm space requirements -front/back-: 1900 mm total height: 2600 mm total weight approx.: 3000 kgDescription- Work container can be lowered- C axis for rotation, indexing and erosion- AGIEVISION control incl. TECTRON, AGIESETUP 2D- USER SEQUENCE, SPACETRACK, AGIEPATH with GEOEDITOR- Electrode changer 28 times- Incl. EROWA pneumatic chuck
CONTROLS CNC controls WORKING RANGE -CUBIC- X-axis travel: 250 mm Y-axis travel: 160 mm Z-axis travel: 250 mmTECHNICAL SPECIFICATION Table-size : 480 mm Table-size : 330 mm Adjustment of x-axis: 250 mm Adjustment of y-axis: 160 mmELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 1200 mm space requirements -front/back-: 1200 mm total height: 2500 mm total weight approx.: 1000 kgEquipment:-Agietron Compact 1 30A/C-axis / DAI 1-P-AGIE Fuzzytron-14 color screen-Fire extinguishing system-3-compartment electrode magazine-Micro-machining variant-lots of accessories
table length: 780 mmtable width: 500 mmampere: - AControl: Heidenhain 121 total power requirement: - kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: 2 x 2 x 2 mNo. 1564Die-sinking EDM machine HANSEN 750 Smax. workpiece weight 100 kgWorking area: 500 x 300 x 375Control: Heidenhain TNC-121 Eropuls NC-2000Table 780 x 500 mmSpace requirement approx. 2 x 1.5 mWeight approx. 3.7 tonsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
