查看详情
ESCOFIER P440 CN - ms
锥齿轮研齿机
Laem System VIS100-800 VIS 机器
二手已验证卖家
询问价格
直接联系卖家
1 / 8
技术参数
· ID 166200851二手设备
- 状况
- 二手
- 出厂年份
- 2015
- 所在地
- Strzebielino, Poland
Identifikation
制造商Laem System
型号VIS100-800
物品编号4884875
Technik
数量1
描述
2015 Laem System VIS100-800
1. General Characteristics
The VIS Machine is designed to correct alignment errors and remove defective spans from finished reels of APET sheets. The machine is bidirectional, allowing the web to run through the machine in either direction: during the first passage (from right to left), the web is checked by the operator and if necessary the defective spans are eliminated with the help of a splicing table. Once the reel has been cleaned and rewound, it can be unloaded, or if necessary, processed again (from left to right), especially if the material is printed.
The splicing table is located in a comfortable ergonomic position, and it is designed to facilitate the splice (top and bottom) of rigid materials.
2. Web materials to be handled
- The doctoring machine can unwind, process and rewind APET/PE materials
The thickness range to be considered is 50 – 600 μm
3. Machine
Maximum material width: 800 mm
Maximum outer diameter unwinding/rewinding: 1000 mm
Diameter cores unwinding/rewinding: 3” / 6”
Maximum mechanical speed: 600 m/min
Unwind & Rewind Tension range: 25-250 N
Taper Tension: From 100% to 50% of the set tension
Web direction: Bidirectional
Electric power supply, drive: CA 400V – 50HZ
Electronic power supply, service voltage: 12 kW
Electronic components: Siemens
Min. Pressure of compressed air supply: 6 bar
Consumption of compressed air, humidity-free: 70 l/hr
Noise level Lp(A): < 80 Db(A)
Safety standard: DM 2006/42 CE
Find more here - .ucymachines/
Contact us at - sales@ucymachines
1. General Characteristics
The VIS Machine is designed to correct alignment errors and remove defective spans from finished reels of APET sheets. The machine is bidirectional, allowing the web to run through the machine in either direction: during the first passage (from right to left), the web is checked by the operator and if necessary the defective spans are eliminated with the help of a splicing table. Once the reel has been cleaned and rewound, it can be unloaded, or if necessary, processed again (from left to right), especially if the material is printed.
The splicing table is located in a comfortable ergonomic position, and it is designed to facilitate the splice (top and bottom) of rigid materials.
2. Web materials to be handled
- The doctoring machine can unwind, process and rewind APET/PE materials
The thickness range to be considered is 50 – 600 μm
3. Machine
Maximum material width: 800 mm
Maximum outer diameter unwinding/rewinding: 1000 mm
Diameter cores unwinding/rewinding: 3” / 6”
Maximum mechanical speed: 600 m/min
Unwind & Rewind Tension range: 25-250 N
Taper Tension: From 100% to 50% of the set tension
Web direction: Bidirectional
Electric power supply, drive: CA 400V – 50HZ
Electronic power supply, service voltage: 12 kW
Electronic components: Siemens
Min. Pressure of compressed air supply: 6 bar
Consumption of compressed air, humidity-free: 70 l/hr
Noise level Lp(A): < 80 Db(A)
Safety standard: DM 2006/42 CE
Find more here - .ucymachines/
Contact us at - sales@ucymachines
询问此设备
您的询问将直接发送给此设备的卖家。
