镗床加工中心 二手 出售 (564)

EKM公司的双簧管、钻孔和钻孔设备 电源： 4.4 kW 1个肺。工厂夹具 1 个钻头，带 5 个主轴，串联距离 25 毫米/40 毫米/40 毫米/25 毫米 4 件胶合和对决工具 4 件可调宽度 220 mm 桌下河蜀 西门子硅酸盐控制器 功能齐全的 CD 上 PLC 的替代程序， 运输尺寸：长 1500 毫米 x 宽 1500 毫米 x 高 2400 毫米 机器重量 1000 kg 条件良好，功能齐�

圆锤和开槽钻孔钻机 HOFFMANN HT 200 这台机器状况非常好，来自一所教育机构，使用时间� ��长，几乎如新，几乎没有使用痕迹 这使得可以铣削带槽孔和钻销孔，并且在数字计数器� ��可以非常精确地读取钻孔高度 配备3个钻头夹具：适用于M10外螺纹的钻头，以及12mm� �16mm柄的钻头，此外还有一个双爪夹头，适用于3-20mm� �钻头 左右各有工件辅助支撑，可旋转并配有承载辊 这台机器有起落架 机台上有两个角度停止，分别对应左右 夹紧臂可以移动和移动 配备栏杆监视装置，可调节范围为80-160毫米，配备数� ��计数器，并可拾取蘑菇 380V、1400W和1800W，涵盖两个速度范围 1350和2770转/分钟 制造年份：1997年 重量：约280公斤 用这台机器，你可以铣出开槽孔，比如锁盒等，或者�  ...

Manufacturer: Biesse, Type: Rover A 1532, Year: 2019, Control: NC BH660, Software: Telesrvice, Working range X: 3140, Working range Y-axis: 1560, Working range Z: 200, C axis: yes, Number of milling spindles vertical: 1, Tool adaption system: HSK 63 F, Milling engine 1 hours power: 13,2, rpm 1): 1000-24000, Tellerwechseler: 8, Pickup Wechlser: 16, Vertical drills-X: 17, Drill vertical Y: 11+6, Horizontal drills-X: 5, Drill horizontal Y: 3, Traverse table: 6, 2 station allocation: yes, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 250, Saw unit: yes, Year :2019

Manufacturer: Koch, Type: BD 61 PTP, Year: 1996, Control: Beckhoff, Software: Beckhoff, Working width min-max mm: 50-1200, Min.-max. workpiece thickness in mm: 10-50, Drilling support horizontal: 1, Drill gearings: 1, Drill gearings: 1, Drill gearings: 1, Number of drill spindles: 1, Drilling engine kW: ca.1,0, Working range max mm: 60, Axis-controlled: X/Z, Dovel lenght mm: 8 X 30, Number of doveling tools: 1, Elektronische : yes, Dowel monitoring: yes, Glue high-pressure pump: Niededruck, Glue quantity setting: yes, Beleimwerkzeuge: 1, Dovel insertion: yes, Dowel size mm: 8, Drilling depth: 45, Drilling hight: 50, Year :1996

Manufacturer: Biesse Rover A Nesting, Type: Rover A Nesting, Year: 2020, Control: Biesse, Working range X: 3140, Working range Y-axis: 1580, Working range Z: 230, C axis: yes, Number of milling spindles: 1, Number of milling spindles vertical: 1, Milling engine 1 hours power: 12, rpm 1): 1800-2400, Number of tool changers: 1, Tellerwechseler: 12, Mitfahrender Werkzeugwechsler: yes, Vacuum pumps m³/h: 120, Saw unit: yes, Portal machine: yes, Werkstückspannsystem: Vakuum, machine ready for demonstration: yes, Automatic setting up table: yes, Charging system single-sided: Hubtisch, FREE TEXT: Entladeband + zusätzlicher Werkstückreinigung/genaue Maschinentechnik kommt noch, Year :2020

Manufacturer: Homag Doppelspindelfräse 4 Achsmaschine, Type: BMG 512, Control: Woodwoop 6.0, Min.-max. workpiece length in mm: 4500, Min.-max. workpiece height in mm: 1600, Aluminium processing: 300, Throuh running machine: yes, Feeding speed max m/min: yes, C axis: 2, B-axis: HSK 63, Pendulum processing: ca.12, Work piece width min-max mm: 1800-24000, Min.-max. workpiece length in mm: ca.12, Horizontal: 1, Number of milling spindles vertical: 14, rpm 1): 9, Milling engine 2 hours power: 6, rpm 2): 2, Number of tool changers: 2, Kettenwechsler: yes, Pickup Wechlser: yes, Working widht max mm: 6, Horizontal drills-X: yes, Belt conveyor: yes, Number of tables: yes, Traverse table: 120, Aluminium sleeking table: Automatisch, roller table: 16, 2 station allocation: yes, Stops in the table rear: yes, Drill vertical: yes, Edgeband hight mm: yes, Magazine Qty: no, Schnittstelle DXF: ink.Werkze ...

Manufacturer: Biesse 5 Achsmaschine, Type: Arrow FT-5 Achsmaschine, Year: 2007, Control: XP 600, Working range X: 2 X 1600 , Working range Y-axis: 2600, Working range Z: 300, C axis: yes, B-axis: yes, Pendulum processing: yes, Number of milling spindles: 1, Tool adaption system: HSK 63F, Milling engine 1 hours power: 12, rpm 1): ca. 24000, Number of tools per tool-magazine: 10, Vertical drills-X: 18, Horizontal drills-X: 3, Number of tables: 2, raster table: yes, 2 station allocation: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 2 X 250, Drill vertical: 3, Saw unit: 120 mm, Portal machine: yes, Werkstückspannsystem: Vakuum, Schnittstelle DXF: yes, Zentralschnierung: yes, Available: sofort, FREE TEXT: Wassergekühlte Spindel, Year :2007

Manufacturer: Sergiani-Bürkle-Holtkamp, Type: Herstellung Türrohlinge, Year: 2008, Herstellung von: Herstellung Türrohlinge, Maschinensteuerung: Übegordnet, Work piece width min-max mm: 1200 X 2200, Min.-max. workpiece height in mm: 35-60, Machine type1: Beschickugsanlage Sytematic, Manufacturer2: Bürstenalage Bürkle, Machine type2: Scheibenrollenbahn Bürkle, Manufacturer3: Scheibenrollenbahn Bürkle, Manufacturer4: 4 Walzenleimaufttragsmaschine Bürkle, Machine type5: DAK 1300, Manufacturer6: Sytematic, Machine type6: Belegestation , Manufacturer7: Sytematic, Machine type7: Aufgabestation Rahmen und Füllung, Manufacturer8: Sytematic, Machine type8: Winkelübergabe, Hersteller9: Sergiani, Maschinentyp9: 10 Etagenpresse, Hersteller10: Aulauftransport Sergiani, Year :2008

Manufacturer: Homag BAZ , Type: 211 Venture 22 L, Year: 2006, Control: Woodwop/Powercontrol PC 85, Software: Softwarepaket AV, Work piece width min-max mm: 4400 X 1550, Feeding speed max m/min: X= 80/Y=80/Z=30, C axis: yes/Schnittstelle Flex 5, Pendulum processing: yes, Work piece width min-max mm: 4400 X 1550, Number of milling spindles: 1, Number of milling spindles vertical: 1, Tool adaption system: HSK 63 F, Milling engine 1 hours power: 12, rpm 1): 1500-24000, Number of tool changers: 1, Tellerwechseler: 1, Pickup Wechlser: Verleimteil/Easy Edge, Number of tools per tool-magazine: 18, Vertical drills-X: 11, Drill vertical Y: 7, Horizontal drills-X: 1, Drill horizontal Y: 2, Traverse table: 8 Traversen, 2 station allocation: yes, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 250, Saw unit: yes, Edgebanding unit: yes, Edgeband hight mm: 60, LED- ...

Manufacturer: Weeke, Type: Optimat BHX 500, Year: 2008, Control: PC 85, Software: Woodwop, Barcode: yes, Operating system: Windows, Machining stations: 2, Work piece width min-max mm: 70 - 1.000 (1.250), Work piece length min-max mm: 200 2.500, Work piece thickness min-max mm: 8 - 80, 3 axis control: yes, Working range X: 2.500, Working range Y-axis: 1.000, Vertical drilling station from below: 1 = 36 Spindeln, Vertical drilling station from above: 1 = 36 Spinden, Automatic setting up: yes, Transmission station: yes, Spindles controlled from below: x=8/Y=2, Spindles retrievable horizontal: 1, Tool changer: no, Power kW 1: 6, Machining stations: 2, FREE TEXT: einschl. Beschickung und Igeltransport, Year :2008

Manufacturer: Homag, Type: BAZ 20/50/16/V/KA, Year: 2000, Control: NC-83, Software: Woodwop, Barcode: möglich, Working range X: 5600, Working range Y-axis: 1600, Working range Z: 250, C axis: yes, Pendulum processing: yes, Number of milling spindles vertical: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: 12, rpm 1): 1500-18000, Number of tool changers: 1, Kettenwechsler: yes, Number of tools per tool-magazine: 70, Mitfahrender Werkzeugwechsler: yes, Vertical drills-X: 11, Drill vertical Y: 7, Number of tables: 8 Traversen, Traverse table: yes, 4 station allocation: yes, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 2 X 140, Saw unit: yes, Edgebanding unit: 360 Grad, Edgeband hight mm: 10-60, Magazine Qty: 6-fach, Radial arm machine: yes, incl. tools: yes, machine ready for demonstration: yes, Automatic setting up table: yes, CE-Si ...

Manufacturer: Priess und Horstmann, Type: BAT-RTW-CNC, Year: 2003, Control: NST Panel PC W2k, Software: Ferro CAN Bus, Online connection: möglich, Machining stations: 4, Work piece width min-max mm: 130 - 600, Work piece length min-max mm: 290 - 1.300, Work piece thickness min-max mm: 16 - 25, 3 axis control: yes, Destacking unit: yes, Robot charging: yes, Beschickungsband: yes, Vertical drilling station from below: 2, Belt bores: yes, Drill and set buffer: yes, Grip holes: yes, Special bore area: yes, Automatic setting up: yes, Fitting station: yes, Transmission station: yes, Hordenwagen Aufstapelstation: yes, Automatic feed of the: yes, Line boring units pcs: 2, Line screw running units: yes, Year :2003

Manufacturer: HomagTürenfertigung mit mit Verleimteil und KUKA Roboter, Type: BOF / BAZ20/50/18/2/D, Year: 2002, Control: Homatic PC 83, Software: Woodwop, Work piece width min-max mm: 1600, Min.-max. workpiece length in mm: 800 - 3500, Min.-max. workpiece height in mm: 12 - 60/120, Working range X: 5800, Working range Y-axis: 1600, Working range Z: 160, C axis: 2, Work piece width min-max mm: 1600, Min.-max. workpiece length in mm: 800 - 3500, Min.-max. workpiece height in mm: 12 - 60/120, Number of milling spindles vertical: 2, Tool adaption system: HSK F63, Milling engine 1 hours power: 14,5, rpm 1): 1500 - 18.000, Milling engine 2 hours power: 14,5, rpm 2): 1500 - 18.000, Kettenwechsler: 70, Pickup Wechlser: 6, Number of tools per tool-magazine: 6 + 70+ 20, Mitfahrender Werkzeugwechsler: yes, Belt conveyor: yes, 2 station allocation: yes, Vacuum pumps m³/h: 2 x 66, Rigging sup ...

Manufacturer: IMA H 610 Tandem, Type: BIMA 610/2H/875, Year: 1997, Software: IMAWOOP, Working range X: 5.700, Working range Y-axis: 1.900, Working range Z: 440, C axis: yes, Programming station office: möglich, Work piece width min-max mm: 150 - 1.200, Min.-max. workpiece length in mm: 250 - 5200, Min.-max. workpiece height in mm: 10 - 120, Pendulum processing: yes, Number of milling spindles: 2, Tool adaption system: HSK 63F, Milling engine 1 hours power: 7,5, rpm 1): 1.500 - 18.000, Milling engine 2 hours power: 7,5, rpm 2): 1.500 - 18.000, Vertical drills-X: 2 x 7, Drill vertical Y: 2 x 12, Traverse table: yes, 2 station allocation: yes, Vacuum pumps m³/h: 2 x 200, Saw unit: yes, Edgebanding unit: no, Radial arm machine: yes, Year :1997

Manufacturer: Priess und Horstmann, Type: BAT III-CNC-2, Year: 1996, Control: Priess und Horstmann, Program: yes, Function: Frontenbohrmaschine, Work piece width min-max mm: 100-600, Min.-max. workpiece length in mm: 100-1000, Min.-max. workpiece height in mm: 16-25, Destacking unit: 2, Einlaufrollengang: 2, Dowel driving station: 80, Milling spindles horizontal: Blum, Milling spindles vertical: yes, Fitting type: 21000, Schliesszylinder Bohrstationen: 2600, Schlosskastenfrässtationen: 60, Bänderbohrstationen: 2, Bänder Eindrehstation: 15, Hinges inserting unit: no, Dowel driving station: 3, Working range X: 2, Dowel driving station: 3, Working range Z: 1, Dowel driving station: 3, Drilling support horizontal: yes, Drill gearings: yes, Number of tables: yes, Year :1996

Manufacturer: Bürkle, Type: RCLS 700, Year: 2014, Finished product: Betonplatten, Work piece width min-max mm: 700, Min.-max. workpiece height in mm: 3 - 80, Min.-max. workpiece length in mm: 400, Feeding speed min-max m/min: 2 - 10, Control: Bürkle, Inlet conveyor: no, IR-Trockner 1: 20 x 3 kW, Transport 1: Band/Stange, Lackwalze 3: RCLS 700, UV Trockner Lampen/Watt: 120, UV Trockner Lampen/Watt: 120, Paint rollers overall: 2, UV Trockner gesamt: 2, IR-Trocker gesamt: 1, UV Trockner gesamt: 2, UV dryer: Easy Cure UV 700, Conveyor belts: 0, FREE TEXT: einschl. Dosierwalzenheizung, Year :2014

Manufacturer: Biesse, Type: Rover C6.50 Edge, Year: 2011, Control: Biesse, Software: Works, Work piece width min-max mm: 1.535, Min.-max. workpiece length in mm: 4.600, Min.-max. workpiece height in mm: 225, Working range X: 5.255, Working range Y-axis: 1.963, Working range Z: 350, Pendulum processing: yes, Work piece width min-max mm: 1.535, Min.-max. workpiece length in mm: 4.600, Min.-max. workpiece height in mm: 225, Number of milling spindles: 2, Tool adaption system: HSK F63, Milling engine 1 hours power: 12, Kettenwechsler: 22, Vertical drills-X: 12, Drill vertical Y: 17, Horizontal drills-X: 4, Drill horizontal Y: 2, 2 station allocation: yes, Vacuum pumps m³/h: 250, Saw unit: yes, Edgebanding unit: yes, Edgeband hight mm: 9 - 54, Radial arm machine: yes, Waste conveyor belt: yes, Zentralschnierung: yes, Year :2011

Manufacturer: Giardina , Type: Wasser UV Spritzstrasse, Year: 2005, Maschinensteuerung übergeordnet: yes, Work piece width min-max mm: 900, Work piece hight min-max mm: 10-100, Work piece length min-max mm: 4500, Feeding speed m/min: 2-6, UV track: yes, Wasserlackstrasse + UV: yes, Inlet conveyor: 2500, Dedusters: yes, Spraying machine: Dualtech 301, 2 Lackkreise: yes, Belt conveyor: yes, Einlaufrollgang: yes, Angular transfer: yes, Microwellentrocknung: yes, Jet drier mm: yes, Heating medium hot water: yes, Outlet roller conveyor mm: yes, UV Trockner Lampen: 2 von oben<CRLF>1 von unten, Wattleistung: 120, Adjustable: yes, Outlet transport mm: 4500, Jet drier: 1, Inlet conveyor: 2500, Spraying heads - total: 4, work piece detection: yes, Conveyour system: Rolle-Band, Spraying stations: 2, Fast exchange system spray gun carrier: yes, Laquer system - airmix: yes, Laquer recharging:  ...

Manufacturer: Homag mit Verleimteil, Type: Optimat BOF / 40 / G , Year: 2000, Control: WoodWOP, Programmierplatz Büro: yes, Work piece width min-max mm: 1050/1200, Min.-max. workpiece length in mm: 4800, Min.-max. workpiece height in mm: 60/200, C axis: yes, Tool adaption system: HSK F63, Milling engine 1 hours power: 12, rpm 1): 1500 - 18000, Number of tool changers: 1, Number of tools per tool-magazine: 12, Mitfahrender Werkzeugwechsler: yes, Vertical drills-X: 11, Drill vertical Y: 7, Horizontal drills-X: 4, Aluminium sleeking table: yes, 2 station allocation: 2, Stops in the table front: 6 , Vacuum pumps m³/h: 120, Saw unit: yes, Edgebanding unit: no, Marking laser: Laserpositionerhilfe, Radial arm machine: yes, Foot mats: yes, Available: ca. 03/2017, Year :2000

Manufacturer: Morbidelli, Type: U 50, Year: 1991, Control: Num, Min.-max. workpiece length in mm: 150-3150, Min.-max. workpiece height in mm: 10-60, Working range X: 3150, Working range Y-axis: 1300, Working range Z: 60, C axis: no, Pendulum processing: yes, Min.-max. workpiece length in mm: 150-3150, Min.-max. workpiece height in mm: 10-60, Number of milling spindles vertical: 2, Tool adaption system: Schnellspansystem, Milling engine 1 hours power: ca.4,4, rpm 1): 12000/18000, Milling engine 2 hours power: ca.4,4, Number of tool changers: keine, Horizontal drills-X: 2, Drill horizontal Y: 2, Traverse table: yes, 2 station allocation: yes, Stops in the table front: 2 reihen, Vacuum pumps m³/h: 100, Saw unit: yes, Portal machine: yes, machine ready for demonstration: yes, Available: sofort, Year :1991

Manufacturer: Morbidelli, Type: Author 600, Year: 1999, Control: Num 1040/X-Log, Work piece width min-max mm: 1680, Min.-max. workpiece length in mm: 4400, Min.-max. workpiece height in mm: 10-80, Working range X: 4829, Working range Y-axis: 1774, Working range Z: 180(280), C axis: yes, Number of milling spindles: 1, Tool adaption system: ISO, Milling engine 1 hours power: 7,5, Number of tool changers: 2, Number of tools per tool-magazine: 4 + 8, Mitfahrender Werkzeugwechsler: yes, Vertical drills-X: 12, Drill vertical Y: 6, Horizontal drills-X: 4, Drill horizontal Y: 2, Traverse table: yes, 4 station allocation: 4, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: ca.60, Saw unit: schwenkbar, Radial arm machine: yes, Year :1999