锯床 二手 出售 (1,056)

Depth of cut at 90°: 200 mm; Depth of cut at 45°: 140 mm; Cutting width at 90°: 420 mm; Cutting width at 45°: 295 mm; Miter range horizontal: 45° -90° -25°; Miter range vertically: 60° -90° -30°; Sawblade diameter: 520 mm; rpm: 2800 U/min; Motor: 5 kW; motor brake: yes; suction plant diameter: 100 mm; weight: 490 kg; suitable for: wood, PVC, alucross-cut and mitre saw with maximum cutting height of 200mmstable grey cast iron constructionprecise ball bearing guide of the tool slide on hardened and ground steel shaftsmanual saw feedfast mitre adjustment up to 25° horizontal and 30° verticalreadjustable fixed stops at 90° and 45°lower saw blade protection can be connected to extraction systemmachine mounted on mobile machine base with 1.5 m long roller conveyors left and rightleft side with scale and stop slide

A Strebig vertical panel saw is available. Horizontal/vertical cutting length: 4200mm/2200mm, max. cutting depth: 80mm, saw blade diameter: 300mm, saw blade bore: 30mm, speed: 4750rpm, machine dimensions X/Y/Z: approx. 5200mm/1200mm/2700mm, weight: approx. 800kg. An on-site inspection is possible.

: 15282 90 band length: 4600 - max. 4750 mm: Fabr. Ideal weight: ca. 890 kgdimensions of the machine ca.: 130 x 850 x 2300 mmPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

圆锯台锯圆锯 切割高度：280毫米 锯片直径750毫米 电机功率 7千瓦 V型皮带传动 3 V型皮带 桌面尺寸：1250毫米 x 940毫米 滑动止挡器放在桌上 止动长度 1200 毫米 × 高度 125 毫米 锯片右侧最大宽度为550毫米 抽取连接直径120毫米 托盘重量340公斤 尺寸 1600毫米 x 1100毫米 x 高1350毫米 载重尺寸 1400毫米 x 1100毫米 x 高1600毫米

1985年建造的Hüllhorst双交叉切割锯木，状况良好， 使用至2026年5月 装载尺寸3900毫米，宽1000毫米，高800毫米 从1920毫米的桩长开始 快捷长度：2500毫米，带电动机长度调节 斜切设施 按地点计算的价格

Key data: 45 °, 2600 mm, 1350 mm

滑动桌锯VEMA 类型FBKS 机器编号。1367 建于1994年 锯片旋转45° 滑动车厢长度：2600毫米 电机功率：7.5千瓦 无得分者 锯片右侧的切割宽度为1350毫米 带有表扩展和表扩展 配备窄排油罩和宽排油罩 抽取连接直径120毫米 转速为4000、5000、6500转/分，通过皮带调节 锯片直径最大450毫米 最大切割高度155毫米 托盘重量980公斤 尺寸 2850毫米 x 3500毫米 x 高1400毫米 载重尺寸 2850毫米 x 2000毫米 x 高1600毫米

Key data: 500 mm, 180 mm

桌下横切锯 切割宽度约为500毫米 切割高度约120毫米 从下方到后连续的横切动作 电容由脚踏开关触发 电机 约3千瓦 锯片直径500毫米，锯刃为HM型 锯体背面底部的吸力连接处，Diam。100毫米 每侧滚筒输送机长3000毫米，滚筒长度500毫米， 辊径80毫米，辊距从中心到中心 205毫米 一台带有两个滑动长度止挡的滚筒输送机 外部尺寸：长6800毫米 x 宽950毫米 x 高1300毫米

Three-function combined table circular saw, slotted hole drilling and milling machine by Kirchner, Leipzig. Without milling arbor. Technical data: Motor: 3 kW Condition: Gebraucht Location: Tauberbischofsheim, Germany

Portable firewood saw for cutting up strips, branches and other waste wood. Technical data: Length: 950 mm Width: 600 mm Cutting height: approx. 60 mm Motor: 1.5 kW Power supply: 220 V Condition: Gebraucht Location: Tauberbischofsheim, Germany

Portable firewood saw for cutting up strips, branches and other waste wood. Technical data: Length: 950 mm Width: 600 mm Cutting height: approx. 60 mm Motor: 2.2 kW Connection: 16 A / 400 V Condition: Gebraucht Location: Tauberbischofsheim, Germany

The EMMEGI wood and aluminium cross-cut saw is designed for cutting to length and mitre cuts: swivelling Technical data: Motor: 0.55 kW / 220 V Cutting height: approx. 50 mm Cutting depth: approx. 80 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Rema DMGB-35 double cross-cut saw, including an outfeed conveyor belt, for cross-cutting timber on both sides. This machine was specifically used for cutting doors to size. In its current condition, the cutting length is limited to 1,000 mm, but this can be extended. Technical data: Belt length: approx. 1,700 mm + 2,700 mm Cutting width: max. 2,500 mm Cutting height: max. approx. 80 mm Condition: Gebraucht Location: Unbekannt, Belgium

Pfeiffer Piccolo pendulum saw with a sturdy roller feed system for cutting boards and beams. The machine is fitted with a pneumatic saw feed mechanism with a safe two-hand operation system. Video available on request. Technical data: Cutting height: max. approx. 120 mm Cutting width: max. approx. 600 mm Roller table: 250+360 cm Feed: Pneumatic Condition: Gebraucht Location: Tauberbischofsheim, Germany

Striffler Type 2750-E double mitre circular saw for precise mitre and cross cuts in timber profiles, mouldings and frames. The machine is ideally suited to mass production in the window, door and furniture manufacturing sectors, thanks to its two pneumatically swivelling saw units and electronic positioning. Technical data: Cutting length: approx. 2,200 mm Mitre angle: 45° – 90° Workpiece: max. 50 × 70 mm Further details: See PDF Condition: Gebraucht Location: Tauberbischofsheim, Germany

Graule AGT combined pull-through and table circular saw. The pull-through saw can be tilted and swivelled. The machine can also be used solely as a pull-through saw by removing the table. Cutting height 85/40 mm Technical data: Cutting length: max. 380 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Dimter OptiCut 700 automatic optimising cross-cut saw (sliding saw) for cutting very wide timber to size according to defects (marked with fluorescent chalk) and length. Technical data: Cutting height: max. 120 mm Feed length: max. 5,500 mm Cutting width: max. 700 mm Saw blade diameter: max. 700 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Bäuerle KFL Milling and Drilling Machine The robust Bäuerle KFL combined woodworking machine combines a panel saw, a long-hole drilling machine and a table milling machine with feed in a single unit, and comes with a comprehensive range of accessories. Technical data: Motors: 2 Length: approx. 320 cm Width: approx. 140 cm Height: approx. 160 cm Table: swivelling Technical details: on request Condition: Gebraucht Location: Tauberbischofsheim, Germany

Sturdy Pehaka band saw for cutting timber and other materials. Technical data: Roller diameter: 800 mm Motor: 3 kW Clearance height: max. approx. 350 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

The Graule ZS 85 N mitre saw is designed for cutting to length and making mitre cuts: it can be swivelled and tilted. Cutting height 85 mm Cutting length 380 mm Technical data: Motor: 1.5 kW Connection: 380 V Condition: Gebraucht Location: Tauberbischofsheim, Germany

Large A. Recker ATS-type mobile timber circular saw for various sawing tasks in workshops or on construction sites. Condition: Gebraucht Location: Tauberbischofsheim, Germany

The Ulmia 1622 table saw is designed for precise rip and cross cuts in solid timber and wood-based materials. Its robust construction ensures reliable performance in craft workshops and general workshops. Ideal for joinery as well as general timber and furniture making. Technical data: Table size: 560 x 710 mm Saw blade diameter: max. approx. 300 mm Motor: 1.5 kW Condition: Gebraucht Location: Tauberbischofsheim, Germany

Elektra-Beckum BA S 600 light-duty band saw for cutting timber and other materials. Technical data: Roller diameter: 600 mm Weight: 160 kg Cutting height: max. approx. 300 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

SCM Type M3 multi-blade and trimming circular saw for efficient rip cutting, trimming and cutting to size of solid timber, boards and planks. This robust machine is suitable for precise batch cutting with multiple saw blades and a continuously adjustable chain feed. Technical data: Chain width: 300 mm Cutting height: ~100 mm Engine: 35 PS Condition: Gebraucht Location: Tauberbischofsheim, Germany

Weinig OptiCut C700 under-table cross-cut saw for the safe and precise cutting of solid timber, particularly hard and heavy timbers with large cross-sections. The machine features a pneumatically guided saw unit, two-hand control and a hold-down device, and is ideally suited for sawmills, timber construction and industrial solid timber processing. Technical data: Saw blade diameter: 550 mm Cutting width: 750 mm Cutting depth: 175 mm Motor: 5.5 kW Condition: Gebraucht Location: Tauberbischofsheim, Germany

APK special-purpose automatic sawing and milling machine for cutting timber blocks to length and subsequently milling them. Custom-built for the production of cutlery tray inserts (see pictures) or similar workpieces. Workflow: 1. Feeding the material from the magazine 2. Cutting to length (sawing) to the desired length 3. Milling the sawn workpieces 4. Ejection of the finished part. Technical data: Workpiece length: 55–170 mm Workpiece height: max. 27.5 mm Workpiece width: max. 28 mm Milling units: 2 Cross-cut saw: 1 Condition: Gebraucht Location: Tauberbischofsheim, Germany

Flotjet 2000 table-type circular saw, model 480003, for precise rip, cross and mitre cuts in small pieces of solid timber, sheet materials and plastic. The robust construction, the swivelling table and the integrated sliding table enable flexible and precise workpiece guidance and high cutting accuracy. Suitable for furniture making, interior fit-out and craft workshops. Technical data: Pitch: ~ 650 mm Cutting width: ~ 170 mm Cutting height: ~ 40 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Graule Type ZS 135 N crosscut and mitre circular saw for precise cross-cutting and mitre cutting of solid timber, mouldings and profiles with a high cutting height. It can be swivelled and tilted. Its robust construction and precise angle adjustment enable clean and repeatable cuts in craft work and workshop production. Ideal for all woodworking businesses. Includes base frame. Cutting height ~ 135 mm Cutting length ~ 460 mm Technical data: Motor: 2 kW Connection: 380 V Condition: Gebraucht Location: Tauberbischofsheim, Germany

Second-hand Martin T72 A panel saw for professional cutting work in woodworking. The machine is suitable for typical panel cutting and sawing tasks when working with wood-based materials. Technical data: Cutting height: ~ 145 mm Cutting width: ~ 1,300 mm Cutting length: 3,300 mm Tilt angle: 45° Stop: Digital Adjustment: Electronic Rip fence: Manual Condition: Gebraucht Location: Tauberbischofsheim, Germany