子类目
(三级类目)
生产厂家:
(品类: 101)
Serial number: 416158Travel X-axis: 1200 mmTravel Y-axis: 900 mmTravel Z-axis: 250 mmZ-passage: 200 mmT-slot clamping table: 1250 x 1000 mmSpeed: max. 20,000 rpmTable dimensions: approx. 1250 x 1000 mmfor further technical data see pictureswith documentationwith accessoriesImportant note: the tool changer is not installed !Reference: Wup - Lot 16 Auction-ID: A7-49882-297
x-travel: 800 mmy-travel: 950 mmz-travel: 1020 mmControl: SIN840D sl B - axis: 360 x 0,001 °A - axis: -180 / +45 x 0,001 °feed x-axis: 1 - 65.000 mm/minfeed y- axis: 1 - 50.000 mm/minFeed z- axis: 1 - 80.000 mm / min.rapid traverse X/Y/Z: 60 / 50 / 80 m/minspindle turning speed - stepless: 1 - 16.000 U/minpower capacity at 100 % load: 25,00 kWpower capacity at 40 % load: 35,00 KWmax. torque at 40% / 100% load: 223 / 160 Nmspindle diameter in front bearing: 80 mmtool taper: HSK-A63 tool magazin:: 50 tool length - max.: 400 / 465 mmtool diameter: 72 mmtool diameter with 2 vacant positions: 160 mmtool total weight: 8,00 kgsize of pallet: 630x630 mmworkpiece weight: 700 kginterference diameter: 900 mmtotal power requirement: 50,00 kWweight of the machine ca.: 26,00 tdimensions of the machine ca.: 7,00 x 4,50 x H3,50 m5-axis machining center withSIEMENS Sinumerik 840D SL control,integrated ...
: 18 mm: M 12 : M 14 : MK 2 : 225-4.300 U/min.spindle stroke: 80 mmthroat: 190 mmcolumn diameter: 65 mm: 300x240 mm: 2 x 12 x 80 mm: 75/357 mm: 300x240 mm: 2 x 12 x 80 mm: 437/437 mmfeed: von Hand : Handkurbel total power requirement: 0,37/0,55 kWMachine height: 840 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Connection: 13 kWControl: HEIDENHAIN TNC 425Table dimensions: 700 x 360 mmT-slots Number x width x distance: 3 x 18 x 110 mmDistance table to floor: 840 mmMax. table load capacity: 300 kgTravel X-axis: 960 mmTravel Y-axis: 380 mmBall screw X and Y axis: 32 x 10 mm Pitch DiameterDistance table center to stand: min. 190 mm, max. 570 mmSpindle holder taper: ISO 40Z-axis travel: 380 mmSpindle speed: 100 to 6000 rpmRapid traverse: 15 m/minPositioning accuracy: +-0.01 mmRepeatability: +-0.005 mmResolution: 0.001 mmincl. 16-fold tool changerMax. diameter for adjacent tools: 85 mmMax. diameter for free secondary positions: 135 m Max. tool length: 250 mmPermissible weight per tool: 6 kgmax. total weight of the tools: 60 kgAttention: without the machine vise shown in the photos! Inkl. 3D touch probe Reference: Schönichen - Lot 23 Auction-ID: A7-49882-157
Serial number: 498-56Important note: A new spindle has recently been installedTravel paths: X: 800 mm Y: 500+50 mm Z: 550 mmSpindle speed: 12000 rpmTool holder: SK 40Number of tool positions: 40Control: SIEMENS SINUMERIK 840 Dincl. chip conveyor from KNOLL, paper belt filter system from KNOLL, zero-point clamping system from SCHUNK Type: SDE 138Table dimensions: 850 x 350 mmincl. the tool holders and tools on the tool changerincl. touch probe as shown in the pictures Atruck with a width of 3000 mm is required for transportReference: Wittner - Lot 11 Auction-ID: A7-49882-412
Connection: 13 kWControl: HEIDENHAIN TNC 425Table dimensions: 700 x 360 mmT-slots Number x width x distance: 3 x 18 x 110 mmDistance table to floor: 840 mmMax. table load capacity: 300 k Travel X-axis: 960 mmTravel Y-axis: 380 mmBall screw X and Y-axis: 32 x 10 mm Pitch DiameterDistance table center to stand: min. 190 mm, max. 570 mmSpindle mounting taper: ISO 40Travel Z-axis: 380 mmSpindle speed: 100 to 6000 rpmRapid traverse: 15 m/minPositioning accuracy: +-0.01 mmRepeatability: +-0.005 mmResolution: 0.001 mmincl. 16-fold tool changerMax. diameter for adjacent tools: 85 mmMax. diameter for free secondary positions: 135 mmMax. tool length: 250 mmPermissible weight per tool: 6 kgmax. total weight of the tools: 60 kgAttention: without the machine vise shown in the photos! Inkl. 3D Probe Reference: Schönichen - Lot 25 Auction-ID: A7-49882-158
Machine number: 13088094Operating voltage: 380 VFrequency: 50 HzDrilling depth: up to 120 mmControl: HEIDENHAIN TNC 155Table clamping surface: 780 x 230 mmSpindle speed infinitely adjustable: from 50 to 9000 rpmDrive power of the spindle motor: 3.7 kWDrilling capacity in steel: 20 mmDrilling distance of the drill head: 450 mmTravel X-axis: 420 mmTravel Y-axis: 240 mmTravel Z-axis: 120 mmTravel A-axis: +- 30000°Rapid traverse X-axis: 7 m/minFeed X-axis: 7000 mm/minRapid traverse Y-axis: 7 m/minFeed Y-axis: 1 - 7000 mm/minFeed Z-axis: 0.02 - 0.30 mm/revRapid traverse A-axis: 10800°/minFeed: 1 - 10800°/minincl. built-in workshop drawer cabinet with contents of various hand tools, milling cutters, matching tool holders, colletsAttention: the machine is expressly sold as untested!Reference: C.O. - Lot 23 Auction-ID: A7-49882-292
Connection: 13 kWControl: HEIDENHAIN TNC 425Table dimensions: 700 x 360 mmT-slots Number x width x distance: 3 x 18 x 110 mmDistance table to floor: 840 mmMax. table load capacity: 300 kgTravel X-axis: 660 mmTravel Y-axis: 380 mmBall screw X and Y axis: 32 x 10 mm Pitch DiameterDistance from table center to stand: min. 190 mm, max. 570 mmSpindle mounting taper: ISO 40Travel Z-axis: 380 mmSpindle speed: 100 to 6000 rpmRapid traverse: 15 m/minPositioning accuracy: +-0.01 mmRepeatability: +-0.005 mmResolution: 0.001 mmincl. 16-fold tool changerMax. diameter for adjacent tools: 85 mmMax. diameter for free secondary positions: 135 mmMax. tool length: 250 mmPermissible weight per tool: 6 kgmax. total weight of the tools: 60 kgAttention: without the machine vice shown in the photos! incl. the tool holders located in the tool changer as well as touch probe and 4th axisReference: Schönichen - ...
X shaft 700 mm Y shaft 315 mm Z shaft pinole controlled 172 mm Z shaft manual pinole 180 mm W shaft ( Machine head ) 495 mm 4th axle 360 x 0,001 gr with against center. Table size 1230 x 410 Spindle holder SK 30 / DIN 69871A Includes tool drawer Auction-ID: A1-47360-148
Manual 4th +5th axis Swivel-Tilt table Machine can work horizontally as well as vertically. Head with drill pinole Rapid walking 5 mtr/min. SK 40 hydr pull-on device Hor + Vert. ISO 40 Image DIN 69871/1 New keyboard Portable control (electronic handwheel) Auction-ID: A1-47360-146
OKK VC-X350L 5-axis continuous vertical machining center with turning function (C-axis), Fanuc 31i-A5 control. Machine from 2011 in very good condition, very well equipped, in operation. Features Brand / Model: OKK VC-X350L Serial No.: 125 (Manufacture No. MAJ15026) Year of Manufacture: 2011 CNC Control: Fanuc Series 31i-Model A5 with Data Server 5-axis continuous with TCP function Spindle: 12,000 rpm, BT 40 taper Turning function (C-axis): 1,000 rpm Coolant center high pressure 40 bar Coolant refrigeration unit Renishaw OMP60 workpiece probe Renishaw TS27R probe Tool magazine: 60 positions Power supply: 380 V / 50 Hz / 3 phases – 54 kVA, current 82 A Equipment and accessories included Set of 60 tool holders of different types Chip conveyor Fanuc data sheet and original purchase invoice provided History and condition Spindle completely rebuilt by IBAG about 2,000 hours ago: bearin ...
DECKEL MAHO DMU 125 P hi-dyn CNC universal machining center for demanding milling and machining tasks with a large working area, NC rotary table, automatic tool changer, and HEIDENHAIN CNC control. Manufacturer: DECKEL MAHO Pfronten GmbH Type: DMU 125 P hi-dyn Year of Make: 2000 Control: HEIDENHAIN TNC 430 Spindle Type: Motor Spindle Spindle speed: 20 to 18,000 rpm, infinitely programmable Tool holder: HSK 63 Spindle motor: DECKEL MAHO, 10 kW Tool clamping: hydraulic/mechanical Tool magazine: 60 tool positions Automatic tool changer: available Max. tool weight: 10 kg Max. tool Ø: up to 160 mm, speed-dependent Max. tool length: up to 450 mm, speed-dependent NC rotary table: approx. 1,250 x 1,000 mm C-axis: 360°, NC-controlled T-slots: 18H7, spacing 100 mm Feed X/Y/Z: 1 to 10,000 mm/min Rapid traverse X/Y/Z: 12,000 mm/min X-final drive: Siemens, 40 Nm / 2,000 rpm Y-final drive: Siemens ...
25 € 
