车床 二手 出售 (3,112)

: 0560 mm: 390 mm: 2000 mm: 280 mm: 80 mm: 11,25 kWspindle turning speed - stepless: 20-2000 U/minspindle taper: K 8 DIN 55027 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 376 mmturning length: 760 mmcontrol: FANUC I-Series Plus greates pass round over bed: 780 mmswing diameter over slide rest: 630 mmmax. turning diameter: 376 mmspindle turning speed range: 4000 U/minspindle drive motor: 22 / 15 kWspindle nose: ASA A2-8 spindle bore: 81 mmbar material dia.: 76 mmc-axis: 0,001 °chucking diameter: 255 mmNumber of tools: 12 St.travel -x axis: 260 (72 + 188 ) mmtravel -z axis: 830 mmtravel -y axis: 105 (+/- 52,5) mmdiameter of quill: 100 mmquill stroke: 100 mmtailstock taper MT: MT 5 total power requirement: 41,98 kVAweight of the machine ca.: 6,1 tdimensions of the machine ca.: 4,0 x 2,5 x 2,2 mCNC control FFANUC I-Series Plus- chip conveyor- driventools 5000U/min, 7,5kW- C-axis- hydraulic unit- tailstock- coolant 7 bar- bar loader interfaceCapto C3 straight chair: 2Capto C3 90° chair: 1ER20 Capto chuck: 10ER32 Capto chuck: 4Weldon-to-Capt ...

turning diameter over bed: 3750 mmturning diameter over slide rest: 3250 mmturning length: 15000 mmcentre distance: 15000 mmfaceplate: 3000 mmworkpiece weight: 120 tsteady: + 15t Rest: 2 main drive: 119 kWspindle bore: 105 mmspindle turning speed range: 0,33 - 75 U/minfeed in x - axis: 300 mm/minfeed in y - axis: 150 mm/mintailstock quill diameter: 500 mmtotal power requirement: ca 140 kWweight of the machine ca.: - tdimensions of the machine ca.: - m- 2-Carriages- Face Plate 3000mm- 6-Steady Rests- 4-Way Bed Construction- Taper Attachment- Inch/Metric Threading- Tailstock With Live CenterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm: 215 mm: 1000 mm: 180 mm: 42 mm: 2,25/3,75 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm: 215 mm: 1000 mm: 180 mm: 42 mm: 3,75 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

转弯直径：550毫米 转弯长度：1500毫米 控制：Fagor 8055 x轴：108毫米 z轴：3000毫米 总功率需求：千瓦，机器重量约：机器尺寸约：m本广 告数据由ModulMWS创建——LogoTech oHG的软件解决方案�

turning diameter: 500 mmturning length: 1000 mmcontrol: MONFORTS CONTROL control: SYSTEM EURO TURN turning diameter over bed slide: 290 mmspindle bore: 70 mmspindle turning speed range: 3 - 2800 U/minspindle power: 15 kWmax. torque on the spindle: 1530 Nmspindle head: DIN 55027 Gr. 8 feed power X/Z axis: 11300 Nrapid travel - longitudinal/face: 10 / 5 m/minbed width: 360 mmtravel of cross-slide: 265 mmupper slide travel: 140 mmturning tool - shaft cross cut: 32 x 25 mmtailstock quill diameter: 80 mmtailstock quill stroke: 160 mmtailstock taper MT: 5 total power requirement: kWweight of the machine ca.: 3,1 tAccessories: 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

车削直径：1.320毫米，转削长度：5000毫米，摆动直径� ��1250毫米，工件重量：14，滑套上的转弯直径：900 - 950毫米，总功率需求：45千瓦，机器重量约18吨。本广 告数据由ModulMWS——LogoTech oHG的软件解决方案——创建�

转床直径：340毫米，滑套托周转直径：177毫米，转弯� ��度：630毫米，主轴转速——无阶梯：55-3000 U/机器最小重量，约1.55个尺寸，机器尺寸约2 x 1 x 1.6 m，数字显示 HEIDENHAINMisc.accessorieswww.marcels-maschinen.ch 本广告数据由ModulMWS创建——LogoTech oHG的软件解决方案�

faceplate diameter: 4.000 mmtravel -x axis: 4.500 mmtravel -z axis: 600 mmcontrol: Siemens Sinumerik 840D-sl feed range: 0 - 8.000 mm/minturning speeds: 1) 0,7 - 5,6 U/minturning speeds: 2) 2,8 - 22,4 U/minturning speeds: 2,1 - 56 U/mintool taper: Sauter Facing Lathe | ZERBST - DP05/W08 Scope of delivery:- Chip conveyor- Hydraulic unitThe ZERBST - DP05/W08 has been retrofitted in 2010.The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: DP05W08 | DP05 W08 | DP05-W08The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

车削直径：330毫米，车削长度：650毫米，无级转速：3 0-5000 U/minspindle，锥度：ASA A2-5 控制：FANUC 18i-T 本广告数据由ModulMWS——LogoTech oHG的软件解决方案创建�

greates pass round over bed: 670 mmswing diameter over bed slide: 490 mmmax. turning diameter: 490 mmcontrol: SIEMENS - 840 D main spindle bore: 115 mmexternal spindle dia. in forward position: 160 mmCNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 5 UK / 1500 equipped with a turret for driven tools as well as travelling lynette and tailstock.Additional equipment:- Centering points,- Jaw sets,- Clamping jaws,- 3 jaw chuck,A machine video from the production plant will be shared on request.The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: Heynumat 5 U | Heynumat 5-U | Heynumat 5 U 1500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 297 mmturning diameter over bed slide: 160 turning length: 500 mmshort taper holder: Größe 5 spindle bore: 36 mmspindle turning speed range: 30-3550 U/minnumber of speeds: 18 quill adjustment: 90 mmtailstock quill taper MT: 3 cross adjustment: +15 tailstock adjustment - manual: 500 mmtotal power requirement: kWweight of the machine ca.: 610 kgdimensions of the machine ca.: 1,4 x 0,7 x 1,2 mwedge bar chuck Forkardt: Ø 160 mmAccessories:Forkardt V-block chuck, Ø 160 mmCollet chuck,Collets,Steel Multifix system, size Awith 3 quick-change insertsIntegrated center pointChip guardThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

转弯直径：340毫米，转弯长度：1000毫米，控制：Mazatr ol SmoothC 总功率需求：机器千瓦重量，约：机器的t维度，约： m。本广告数据由ModulMWS创建——LogoTech oHG的软件解决方案�

面板直径：4500毫米，摆动直径：5000毫米，转高：2500� ��米，工件重量最大：63 tno。滑轨中：最大2个。冲程：1600毫米，面板转速范� �：0.3 - 32 U/min Drehzahlstufen Drehzahlstufen 总功率需求：130千瓦 机器重量约145 T尺寸：6.6 x 11.4 x 8.4米 - DRO- 2个可旋转Rams（-15 / +40）本广告数据由ModulMWS创建——LogoTech oHG的软件解决方案�

greates pass round over bed: 350 mmswing diameter over face slide: 200 mmcentre distance: 800 mmcentre height: 175 mmturning length: 700 mm3-jaw chuck: Röhm Ø 160 spindle bore: 46 mmspindle head: Gr. 5, DIN55027 number of spindle speeds: 18 spindle turning speed range: 31,5-2500 U/mintailstock quill taper MT: 3 weight of the machine ca.: 1000 kg3-axis digital readoutmanual includedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0554 mm: 370 mm: 3000 mm: 280 mm: 104 mm: 11 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mmturning diameter over slide rest: 260 mmturning length: 1500 mmturning diameter in the gap: 570 mmturning speeds: 45 - 1800 U/mincentre height: 210 mmspindle bore: 52 mmtailstock quill taper MT: 4 MKconnected load frequency: 400 Vtotal power requirement: 3,5 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2,6 x 1,1 x 1,7 mProfessional industrial machinedigital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 280mmBezel fixedBezel rotatingMultifix steel holder.Machine lightFoot brakeremovable chip tray, chip protection wallHardened and ground bed railsComplete coolant systemFeed protectionMachine feetMachine toolThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 2000 mmturning height: 1800 mmControl: Siemens Sinumerik 840 Dsl turning speeds range: 2,8-315 U/mincross rail adjustment - vertical: 1200 mmcross rail adjustment - horizontal: +/- 1150 mm: 1500 mmbit feeder section: 240 x 240 mmMinimum immersion diameter: 340 mmcutting capacity: 50 kNmax. torque on the faceplate: 50000 Nmspeed range step 1: 2,8 - 80 U/minspeed range step 2: 12 - 315 U/minMax. clamping weight: 12000 Kgpower capacity faceplate: 105 kWweight of the machine ca.: 33 tdimensions of the machine ca.: 10 x 5 x 6,5 mFurther technical data: - Feed range of three-phase servo motors: 1–3000 mm/min, 0.01–50 mm/rev - Crossbeam travel speed: 425 mm/minFeatures/Accessories - Increased turning height (+600 mm) - Z-axis extended to 1500 mm - Magazine capacity: 20 positions - Magazine type: disc magazine - Max. tool length: 525 mm - Chip conveyo ...

turning diameter over bed: 1420 mmturning diameter over slide rest: 1000 mmturning length: 15000 mmturning dia. in gap: 2050 mmspindle diameter: 160 mmspeed: 1 - 400 U/minfaceplate diameter: mmspindle motor: 30 kWtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - m- 4-jaw face plate- 4 Steady rest- 4-way toolpost- Rapid traverse- tailstock- Taper turning attachmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

车床直径：280毫米，滑套上方的旋转直径：170毫米，� ��弯长度：600毫米，机器重量约400公斤，主轴通道：26 毫米，速度：55-2000 U/最小功率需求：1.4千瓦，机器尺寸约1.5 x 0.8x1.3米，包括EMCO SOD磨削支撑，包括EMCO四爪夹头，包括机脚，包括换挡 。本广告数据由ModulMWS创建——LogoTech oHG的软件解决方案�

faceplate diameter: 3600 mmswing diameter: 4500 mmturning height: 1850 mmmax. workpiece weight: kgvertical adjustment of the crossrail: mmtravel -x axis: mmtravel -y axis: mmtravel -z axis: mmturning speed range: 0,6- 50 U/minpower capacity: kWmax. torque on the faceplate: weight of the machine ca.: 72 tdimensions: mverticale turning machine double coloumn - digital scale - double coloumn - 2x ram - movable cross slide - extra toolholder (four station) on the side of facing plateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 4000 mmswing diameter: 4200 mmturning height: 2000 mmworkpiece weight: 50000 kgcross travel of ram-slide: 2300 mmslides vertical travel: 1250 mmswival range +/-: -15/+30 Gradfaceplate turning speed range: 0,5 - 55 U/minControl: Fagor 8055i CNC total power requirement: 182 kWweight of the machine ca.: 134 tdimensions of the machine ca.: 5920 x 10200 x 8400 mmMachine overhauled in 2008- CNC Control FAGOR 8055i- Tool C8- Chip ConveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles: 8 spindle passage: 36 mmturning length: 250 mmspindle bearing diameter: 358,2 mmbar material dia.: 36 mmbar length: 4000 mmlongitudinal slide -travel: 145 / 250 mmcross slide - travel: 80 mmspindle turning speed - stepless: 560 - 4000 U/minspindle motor: 28 kWTotal weight, approx.: 8500 kgdimensions of the machine ca.: 5850 x 1900 x 2580 mmxmmxmm- Beckhoff CNC control system (Win2000)- IEMCA 4m bar feeder (PRA52/P-Typ42)+ Hydraulic catch chute+ Mechanical end-piece chute with container+ Parts conveyor belt+ 3–4 bar oil connection+ 100 bar high-pressure connection+ 1 HYDAC hydraulic oil cooler+ 1 oil cooler for cutting oil+ 1 chip conveyor+ 1 magnetic roller for sludge removal+ 1 new air conditioning unit for control cabinet / year of manufacture 2025+ Feed block: new brass strips fitted in 2023, making the machine as good as new+ Spindle couplings 2nd, 4th and 6t ...

turning diameter: 320 mmturning length: 600 mmcontrol: Fanuc Oi-TD spindle bore diameter: 74 mmnumber of controlled axis: 2 turning speed range: 3000 U/minrapid speed: 20 m/minnumber of tapers in turret head: 12 direkttail stock: Ja power requirement: 15 kWweight: 5,0 tdimensions: 3,7 x 1,6 x 2,0 mUsed CNC- Lahte 2 axis- 3 jaw chuck Ø 250 mm- chip conveyor- oil dust collector- Tool presetterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

转弯直径：1800毫米 转弯长度：600毫米 控制：西门子6号 - 颚式夹头：？主轴孔径：130毫米，主轴头：DIN 55027 Größe 11，转速范围：1 - 400 U/minmax。主轴扭矩：9000 总功率需求：38 / 52 千瓦 机器重量约：25 机体尺寸 约：6x3x2.5 m本广告数据由ModulMWS——LogoTech oHG的软件解决方案——创建�

纺锤通道：最大80毫米。转弯直径：最大395毫米。转� �距离：750毫米，控制：系统最大限度为TX 8H。主轴转速：3.150 U/min。CNC车床 |TRAUB - TNA 400 这台机器维护得很好。- - - - #Tags TNA400 |TNA-400本广告的数据由LogoTech oHG的软件解决方案ModulMWS创建�

spindle passage: 80 mmmax. turning diameter: 460 mmMax. Turning length: 1.000 mmcontrol: System TX 8F max. Spindle speed: 2.800 U/min.CNC lathe | TRAUB - TNA 500The machine is in a well-maintained condition.The machine videos from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags:TNA500 | TNA-500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: Fanuc 31/32 i : 2 chucking diameter: 170 mmswing diameter: 210 mmx-travel: 400 mmz-travel: 200 mmlength: 2500 mmwidth: 1900 mmheight: 2300 mmweight: 5500 kgturning height: mmturning diameter: mmswing diameter: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1450 mmturning diameter over slide rest: 950 mmturning length: 4000 mmcentre height: 725 mmfaceplate diameter: 1000 mmtravel -x axis: 980 mmtravel -z axis: 4000 mmworkpiece weight: 2 toturning speed range: 1,5 - 1000 U/minspindle hollow: 500 mmControl: Siemens 828D total power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - m- CNC Control Siemens 828D- Front and Rear 1000mm dia. 4 – chucks- Tailstock- Chip Conveyor- Boring Bar 1500 mm x 120 mm- Boring Bar 1690 mm x 120 mm- Boring Bar 1000 mm x 80 mm- Boring Bar 1500 mm x 100 mm - Quantity of KM ToolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.