Used multi-spindle machine INDEX MS36E Year of manufacture 1996 including tons of accessories (collets, synchronizers, interchangeable wheels, various working curves, etc.) The system is virtually ready for dispatch, in a dismantled state for inspection. Photos, technical data and list of accessories see attachments. It has no major defects, is in principle ready for operation, only the rubber hoses should be changed before commissioning and the coolant-lubricant system should be thoroughly cleaned and rinsed throughout. Accessories list MS36E: IEMCA Loading Magazine Oil filter system (+3 rolls of filter paper) Collets Synchronous Pliers (Sentences) Ø 24 Ø 16 Ø 26 Ø 20 Ø 27 2x Ø 23 Ø 28 2x Ø 26 Ø 30.5 2x Ø 27.5 Ø 31 Ø 32 div. baking Ø 33 3-jaw chuck Ø 34 Ø 36 SW 24 1x spindle stop (currently layer 4) 3 sets ...
number of spindles: 8 spindle passage: 36 mmturning length: 250 mmspindle bearing diameter: 358,2 mmbar material dia.: 36 mmbar length: 4000 mmlongitudinal slide -travel: 145 / 250 mmcross slide - travel: 80 mmspindle turning speed - stepless: 560 - 4000 U/minspindle motor: 28 kWTotal weight, approx.: 8500 kgdimensions of the machine ca.: 5850 x 1900 x 2580 mmxmmxmm- Beckhoff CNC control system (Win2000)- IEMCA 4m bar feeder (PRA52/P-Typ42)+ Hydraulic catch chute+ Mechanical end-piece chute with container+ Parts conveyor belt+ 3–4 bar oil connection+ 100 bar high-pressure connection+ 1 HYDAC hydraulic oil cooler+ 1 oil cooler for cutting oil+ 1 chip conveyor+ 1 magnetic roller for sludge removal+ 1 new air conditioning unit for control cabinet / year of manufacture 2025+ Feed block: new brass strips fitted in 2023, making the machine as good as new+ Spindle couplings 2nd, 4th and 6t ...
建造年份 2006 发那科控制 16 TC 最大车削直径 210 mm X 轴 X1 / X2 mm 200 Z轴（左侧）Z1 mm 200 . Z轴（右侧）Z2 mm 650 棒材直径 45 mm纵向行程 普兰韦格 主轴头 主轴孔 最大车削直径 210 mm 主轴转速 4500 rpm 主轴功率 2 x 11 kW 主轴鼻 A2-5 快速移动 X-Z 轴 24 m/min 快速移动右主轴 32 m（min 2 x 转塔（工具架），可容纳 15 个刀具，驱动，VDI40 索引时间 0.25 秒。 电动工具 12 刀柄 VDI 40 套筒行程 120 毫米 录制 MK 5 配件：棒材送料器（非本机原装） 排屑机，3 个驱动工具
number of spindles: 8 bar capacity: 36 mmcontrol: FANUC 30i-B Subspindle speed: 7.500 U/minBar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system.The machine only has 15.666h spindle hours.The machine is in a well-maintained condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine works with a EGS loading system ->This can be purchased separatelyAn extensive tool package is included.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MULTISPRINT36 | MULTISPRINT-36The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
控制：西门子 840 D 电力线 附件：刀架、杆、装弹库 功能齐全，仍然通电，可以随时访问
number of spindles: 8 bar capacity: 36 mmcontrol: FANUC 30i-B Subspindle speed: 7.500 U/minBar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system.The machine only has 6.944h spindle hours.The machine is in a well-maintained condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine works with a EGS loading system ->This can be purchased separatelyAn extensive tool package is included.The machine video from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MULTISPRINT36 | MULTISPRINT-36The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of spindles: 8 bar capacity: 36 mmcontrol: FANUC 30i-B Subspindle speed: 7.500 U/minBar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system.The machine only has 15.650h spindle hours.The machine is in a well-maintained condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine works with a EGS loading system ->This can be purchased separatelyAn extensive tool package is included.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MULTISPRINT36 | MULTISPRINT-36The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Gildemeister GMC20 ONE, Options / Accessories, - 5 Cross-slides pos. 1;2;3;4;5, - 2 Radial slides pos. 6 for cutting and rear-working operations, - 1 C-axis for the pick up spindle, - Pneumatic work-piece unloading chute for pos. 6, - Work-piece conveyor belt, - Swarf conveyor, worm type, - 5x Frontal tool spindle, fix, - Pick- up spindle in pos. 6, - High pressure coolant device 70l / 50bar, Country of origin: Italy, Control: Siemens 840D, Number of spindles: 6, Max bar diameter [mm]: 25, Spindle speed [rpm]: 6.000, Spindle motor [kW]: 9,1, Z - travel [mm]: 70 / 140, Total power requirement [kVA]: 98, Weight of the machine ca. [kg]: 9.800, Auto bar loader: Cucchi Giovanni DBM.625
