车床 二手 出售 (3,146)

Manufacturer: RAMOType: Conventional precision parallel latheEquipment: 3-jaw chuck, longitudinal and transverse carriage, tool turret, tailstock, gearbox and feeds, coolant system. Threads: visible adjustment tables for metric and Whitworth pitches. Remarks: machine on rack, manual controls by handwheels and levers. Visible condition of use. Auction-ID: A1-50001-12

Professional lathe Digital display 3-jaw chuck 4-jaw chuck Face Plate Fixed bezel Steady bezel Quick-change steel holder with 4 cassettes Halogen Machine Light Chip tray, Chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Rotating center punch Turning diameter over bed 320 mm Turning diameter over support 200 mm Turning length 900 mm Speed 75 - 2000 rpm Tip height 160 mm Spindle bore 50 mm Tailstock quill holder MK 3 MK Connection voltage 230 V Total power requirement 1.5 kW Machine weight approx. 0.29 t Space requirement approx. 2.0 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-49782-442

Lathes with: - 4-fold steel holder - 3-jaw chuck 315mm - Centering tip Turning diameter over bed 500 mm Turning diameter over support 320 mm Turning length 2100 mm Center height 250 mm Spindle bore 60 mm Spindle speeds 11 - 2000 rpm Total power requirement 7.0 kW Machine weight approx. 2.9 t Dimensions approx. 4.3 x 1.2 x 1.3 mm Auction-ID: A7-49782-438

SINO Digital Display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Face Plate 250mm Fixed bezel Quick-change steel holder with 4 pcs steel holder Machine Light Chip tray, Chip protection wall Hardened and ground bed sheets Feed protection Machine Tools Turning diameter over bed 320 mm Turning diameter over support 200 mm Turning length 900 mm Turning diameter in the offset 320 mm Speed 75 - 2000 rpm Tip height 160 mm Spindle bore 38 mm Tailstock quill mount MK 3 Connection voltage 400 V Total power requirement 1.5 kW Machine weight approx. 0.4 t Space requirement approx. 1.6 x 0.75 x 1.7 m Condition: never used / new (5) Auction-ID: A7-49782-500

Guide and tension spindle lathe machine - With photocopying device - 3-jaw chuck 200mm - 2 Mutifix quick-change steel holders - Moving center punch - Machine light - Chip tray Turning diameter over bed 410 mm Turning diameter over support 260 mm Turning length 1000 mm Turning diameter in the offset mm Speed 40 - 2000 rpm Center height 205 mm Spindle bore 50 mm Total power requirement 4.5 KW Machine weight approx. 1.6 t Dimensions approx. 2.4 x 1.3 x 1.5 m Auction-ID: A7-49782-510

Professional lathe 3-jaw chuck 4-jaw chuck Face Plate Fixed bezel Steady bezel Quick-change steel holder with 4 cassettes Halogen Machine Light Chip tray, Chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Turning diameter over bed 320 mm Turning diameter over support 200 mm Turning length 900 mm Speed 75 - 2000 rpm Tip height 160 mm Spindle bore 50 mm Tailstock quill mount MK 3 Connection voltage 230 V Total power requirement 1.5 kW Machine weight approx. 0.29 t Space requirement approx. 2.0 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-49782-498

3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Face Plate 320mm Fixed bezel Steady bezel 4-fold steel holder. Halogen Machine Light Machine Light Foot brake removable chip tray, Chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Turning diameter over bed 400 mm Turning diameter over support 264 mm Turning length 1000 mm Turning diameter in the offset 550 mm Speed 44 - 2000 rpm Center height 200 mm Spindle bore 52 mm Tailstock quill holder MK 4 MK Connection voltage 400 V Total power requirement 1.5 / 2.4 kW Machine weight approx. 0.9 t Dimensions approx. 1.9 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-49782-514

Lead and pull spindle lathe - 4-jaw chuck 200mm - Multifix steel bracket size B - Foot brake - Chip tray Turning diameter over bed 420 mm Turning diameter over support 290 mm Turning length 900 mm Speed 40 - 2000 rpm Tip height 210 mm Spindle bore 38 mm Total power requirement 4.0 KW Machine weight approx. 0.9 t Space requirement approx. 2.4 x 1.1 x 1.3 m Condition: unchecked (6) Auction-ID: A7-49782-499

3-jaw chuck 200mm 4-fold steel holder Turning diameter 350mm Turning diameter via support 210 in offset 500mm Turning length 1000mm Speed 20 - 1400rpm Spindle bore 36mm Motor 2.0 KW Weight 600Kg Dimensions 2.2 x 1.0 x 1.5m Auction-ID: A7-49782-493

turning diameter: 310 mmturning length: 1000 mmcontrol: MSX 501 total power requirement: --- kWweight of the machine ca.: 6,6 tdimensions of the machine ca.: --- mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 420 mmturning length: 3.123 mmcontrol: MORI SEIKI MSX-850III turning dia. over bed: 995 mmswing diameter over slide transversal: 825 mmdist. between centers: 3.200 mmx-travel: 280 mmz-travel: 3.170 mmfeeds: X.Z 30.000 mm/minspindle nose: JIS A2-8 turning speeds: 3.000 U/minspindle passage: 105 mmforward bearing diameter: 160 mmspindle drive: 28 kWTorque: 3.365 Nmturret head: pos. 12 tail stock: weg tailstock quill diameter: 150 mmquill stroke: 150 mmtailstock taper MT: MK 5 total power requirement: 54 kVAweight of the machine ca.: 13,5 tdimensions of the machine ca.: 8.147 x 2.58 x 2.390 mmEquipment- Hydraulic 3-jaw chuck Ø 400 mm - Chuck type SCHUNK THW 400-120- Quick jaw change system for chuck - Hydraulic steady rest SHW type SLU-3.2-ZS - Steady rest capacity 50–200 mm- CNC longitudinal movement of steady rest (A-axis)- Automatic tool measuring device  ...

turning diameter: 255 mmturning length: 500 mmcontrol: FANUC 31i model B Drive tool: 18Kw spindle drive: 15/11 und 7,5/5,5 kWrapid traverse Z-axis: 20 m/minrapid motion - y-axis: 12 m/minrapid traverse X-axis: 16 m/minrapid traverse X-axis: 16 m/minspindle nose: A2-8/A2-6 bar material dia.: 66 mmcentre distance: 639 mmChip coveyor: swing dia.: 270 mmtotal power requirement: 65 kWweight of the machine ca.: 9,6 tdimensions of the machine ca.: 2,85 x 2,2 x 2,05 m-Two 12-station turrets (24 positions total), each with 12 driven tool stations-Y-axes on both turrets-Sub-spindle travel: 635 mm-Sub-spindle rapid traverse: 30 m/min-Travel – X (Turrets 1 & 2): 190 mm-Travel – Y (Turrets 1 & 2): ±40 mm-Travel – Z (Turrets 1 & 2): 500 mm-Spindle speeds – infinitely variable (S1 / S2): 4,000 / 5,000 rpm-Spindle bearing diameter: 120 / 100 mm, C-axis: 0.001°-Turret 1 stations / driven stat ...

turning diameter: 200 mmturning length: 393 mmcontrol: Siemens 810D total power requirement: kWweight of the machine ca.: 3200 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 2500 mmturning diameter over slide: 1800 mmturning length: 25000 mmcentre height: 1250 mmWerkstückgewicht max. ohne Lünette: 70000 kgspindle diameter in front bearing: 500 mmspindle turning speed range: 0,45 - 90 U/minfaceplate diameter: 2480 mmlongitudinal feeds:: 0,125 - 48 mm/Urapid traverse of slide: 3000 mm/minmetrical thread cutting: 1 - 22 mm/Uthreading WHITWORTH: 2 - 23 G/Control: Siemens 840 main drive motor: 80 kWtotal power requirement: kWweight of the machine ca.: 146,5 tdimensions of the machine ca.: 17,3 x 4,9 x 2,5 mUpgraded in 2007- Siemens 840D CNC control system- Faceplate- Support- Columnes- 4-way bed configurationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 4000 mmturning diameter over slide rest: 3500 mmturning length: 30000 mmcentre height: 2000 mmworkpiece weight: 160 tbed width: - mmbed height over floor: - spindle turning speed range: 0,5 - 80 U/minmain drive motor: - kWfaceplate diameter: - mmControl: Siemens 840D total power requirement: - kVAweight of the machine ca.: 160 t2006 modernized/Overhauled and equipped with:- 4-guides bedway- CNC Control Siemens 840D- Face Plate- Counter StayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-49836-29

Conventional lead and tension spindle lathe from the German manufacturer Heidenreich & Harbeck (VDF), Hamburg, classic toolmaker lathe with hardened bed and mechanical feed and thread cutting gear. The machine is equipped with a Multifix quick-change holder (type B) and has a wide range of accessories including tool cabinet and turning holder package. Electrics:Operating voltage: 380 VControl current: 220 VFrequency: 50 HzTotal current: approx. 4 AEquipment:Multifix quick-change holder type Bseveral rotary holders and drill holdersForkardt 3-jaw chuck Ø200 mmTooling tool cabinetclassic VDF feed and threaded gearbox Auction-ID: A7-49942-600

Auction-ID: A1-49836-30

Incl. accessories, consisting of: a.o. Extensive collection of clamping devices 1 storage rack with contents, dimensions (LxWxH) approx: 1350x880x1100 mm Approx. 11 tool holders (quick couplers) 1 cabinet with contents, dimensions (LxWxH) approx: 920x460x1080 mm Auction-ID: A1-49926-6

Auction-ID: A7-49882-106

excl. Fog extraction and excl. Bar Feeder Auction-ID: A1-49836-6

6 loading meter needed for transport, tooling in Turret not included no tooling included Auction-ID: A1-48649-21

turning diameter: 150 mmswing diameter over bed slide: 240 mmturning dia. in gap: 520 mmgreates pass round over bed: 446 mmcentre distance: 850 mmControl: SIEMENS Sinumerik 828D spindle turning speed range: 10-3.000 U/minspindle bore: 52 mmfeed speeds: 15.000 mm/minturret (x-stations): 8 Pcs VDI30 tailstock quill taper MT: MK 4 total power requirement: 23 kVAweight of the machine ca.: 2,6 tdimensions of the machine ca.: 2,5 x 1,7x 1,8 mVery well-maintained machine, barely used—only 270 hours of operationCan be operated both manually and via CNC controlOriginal price over €47,000,netIncludes SCHUNK hydraulic jaw chuck with power unit and foot pedalIncludes coolant systemIncludes 14 tool holdersIncludes USB and LAN portsIncludes automatic guideway lubricationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 330 mmturning diameter over slide rest: 195 mmturning length: 750 mmcenter height over bed: 160 mmcentre distance: 650 mmdigital readout: 3 Achsen HEIDENHAINbed width: 205 mmspindle bore: 36 mmspindle taper: KK5 DIN 55027turning speed range: 48 - 2500 U/minpower requirement: 3,0 kW4-jaw-chuck diameter: 160 mmquick change toolholder: MULTIFIX Typ Ataper in tailstock-quill: MK 3 dia. of quill: 40 mmquill stroke: 100 mmvoltage: 400 Vtotal power requirement: 3,2 kWweight of the machine ca.: 680 kgdimensions of the machine ca.: 1,60 x 0,80 x 1,55 m- Serial-No.: 4432- HEIDENHAIN 3-axis digital readout- MULTIFIX quick-change tool holder- Collet chuck including collets Ø 8 - Ø 27 mm- Face plate Ø 250 mm- Quick-action drill chuck- Center pointThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

various chisels and drills Auction-ID: A1-49836-54

Incl. DSL - AES-GAMMA 30 - Suction Auction-ID: A1-49926-7

Auction-ID: A1-48649-19

Incl. DSL - AES-GAMMA 30 - Extraction, Mixed Lot Tool Holder Auction-ID: A1-49926-8

12-fold VDI tool changer with interchangeable holders (excl. tools) Auction-ID: A1-49836-10

various chisel plates Auction-ID: A1-49836-55