子类目
(三级类目)
生产厂家:
(品类: 102)
turning diameter: 250 mmturning length: 100 mmcontrol: SIEMENS 840 D total power requirement: 35 kWweight of the machine ca.: 7500 kgdimensions of the machine ca.: mE M A G (Germany)Vertical CNC Controlled Hard Turning and Grinding machinewith tool turret and workpiece handling SystemModel VSC 250 DS Year 2004 # M7 28.69324_______________________________________________________Turning Ø, max. 250 mmTurning length internal / external 100 mmWorkpiece length min./max. 29 – 100 mm6-positon tool turret Ø / swing-Ø 480/790 mmWorkpiece spindle Slide travel, X / Z / stroke 680 / 400 / 200 mmFeed rate / Quick feed X/Z 45/30 m/min.Feed force X/Z ...
turning diameter: 400 mmturning length: 915 mmcontrol: NUM Type 1062 T total power requirement: 12,5 kWweight of the machine ca.: 5500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 300 mmturning length: 710 mmcontrol: SIEMENS SINUMERIC 840 total power requirement: 40 kWweight of the machine ca.: 6000 kgdimensions of the machine ca.: mI N D E X (Germany) CNC Controlled Slant-Bed Chuck Lathe with Turret and Tailstockand INDEX CNC Control C 200 – 4 (SIEMENS)Model G 300 Year 1995 S/N 5000 65_____________________________________________________________Turning - Ø, with chuck, max. 300 mmSpindle bore 90 mmMax. Workpiece Swing dia. 400 / 590 mm Turning length / travel of turning slide, (X-Achse) max. 710 mmTurret head slide cross movement (Z-Axis) max. 140 mmTurret with 12 tool holder positions DIN 30 mmFeed range of turret slide / ...
turning diameter: 150 mmturning length: 500 mmcontrol: total power requirement: 4 kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 200 mmturning length: 400 mmcontrol: SIEMENS SINUMERIC 840 C total power requirement: 40 kWweight of the machine ca.: 6.500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 250 mmturning diameter over slide rest: 140 mmturning length: 550 mmturning speeds: 125 - 2000 U/mincentre height: 125 mmspindle bore: 26 mmtailstock quill taper MT: 2 MKtailstock quill stroke: 65 mmconnected load frequency: 230 Vtotal power requirement: 0,75 kWweight of the machine ca.: 0,135 tdimensions of the machine ca.: 1,25 x 0,6 x 0,6 mSpeed in 6 levels 125 - 2000rpm.3-jaw chuck 125 mm.4-jaw chuck 125 mm. (Independent)Fixed bezel.Revolving bezel.4-fold steel holder.chip tray.back panel.spindle protection.Hardened bed rails.Longitudinal feed with left / right switching.Set of change gears.Associated Tools.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 320 mmturning diameter over slide rest: 200 mmturning length: 900 mmturning diameter in the gap: 320 mmturning speeds: 75 - 2000 U/mincentre height: 160 mmspindle bore: 38 mmtailstock quill taper MT: 3 connected load frequency: 400 Vtotal power requirement: 1,5 kWweight of the machine ca.: 0,4 tdimensions of the machine ca.: 1,6 x 0,75 x 1,7 mSINO digital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 250mmbezel fixedQuick-change steel holder with 4 pcs. steel holdermachine lightChip tray, chip protection wallHardened and ground bed trackslining protectionmachine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
我们代表客户销售 Haas ST-20 车削中心。机床已安装后从未生产使用过。- 控制选项， - 选件包， - 高压冷却液流量， - 附件
turning diameter: 1250 mmswing diameter: 1160 mmturning height: 800 mmfaceplate diameter: 1000 mmtotal power requirement: 97 kWweight of the machine ca.: 25000 tdimensions of the machine ca.: mP I T T L E R (Germany)CNC Controlled Vertical Turning and Milling CentreWith Tool Changer and Pallet ChangerModel PV 1250 / 1-1 Year 1994 _______________________________________________________Turning Ø max. 1,000 mmSwing Ø max. 1,160 mmTurning length 800 mmX Axis - horizontal 1,300 mmY Axis - vertical 800 mmFeed / quick feed 16,000 mm/minMain spindle speeds 10 - 1,000 rpm !Main spindle speeds via separate C Axis 0.1 - 16 rpmPositioning accuracy of C Axis 360° + / - 5 Tool holder ISO 50Tool drive 22 kWMax. torque / spindle speed 315 Nm / 2,500 rpmPallet size 630 x 630 mmSpindle drive ...
swing diameter: 640 mmmax. turning passage: 640 mmcontrol: Simens 840 D Powerline - - - - - Main spindle - - - - -: - - - - - -bar material dia.: 65 mmchuck diameter: 200 - 315 mmspindle bore diameter: 80 mmdiam. of main spindle in forward position: 120 mm--- Subspindle ---: - - - - - -bar material dia.: 65 mmchuck diameter: 315 mmspindle bore diameter: 80 mmforward bearing diameter: 120 mm- - - - - General data - - - - -: - - - - - -spindle distance: 1.500 mmturning length: 1.185 mmMain-/Counter -spindle turning speeds: 5.000 U/mindriven tools turning speeds: 12.000 U/minSlide cross: X1, Y1: 550 / 180 mmSlide cross: Z1: 1.185 mmSlide cross: B1: 240 °Slide cross: X2: 180 mmSlide cross: Z2: 1.050 mmSlide cross: Z3: 1.150 mmCNC Turning- and Milling Center | DMG GILDEMEISTER - GMX 250 linear equipped with main/counter spindle, chip conveyor, tool changer, a turret for driven tools and and ...
回转直径： 530 毫米0： 620 毫米轮宽： 20 毫米卷径： 45 毫米总功率要求： ohne kW重量： 250 公斤机器尺寸 大约： 1,2 x 0,30 x 1,3
turning diameter over bed: 250 mmturning diameter over slide rest: . mmcentre distance: ca. 400 mmcentre height: ca. 125 mmturning speed range: 80 - 3000 U/minnumber of speeds: 18 spindle bore: 24 mmtailstock quill taper MT: 3 weight: ca. 400 kgdimensions: ca. 1200 x 650 x 1300 mm4-jaw-chuck diameter: 125 mmincluding Röhm four-jaw chuck, Ø 125 mm incl. drilling and turning jaws,collet chuck device incl. collets 1-20 mm (exept 5 and 10 mm) with 1 mm gradientMultifix size A with 3 interchangeable holders,chuck protection with shutdownThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
规格： 制造商： Spinner 类型：SB-CNC 制造年份： 1998 系统：西门子 840D 行程：X 250 mm Z 285 mm 接通时间： 32,156 小时 主轴： 主轴转速： 5,000 rpm 主轴通道：42 mm 刀架： 刀架：线性梁上的 Multifix A 尺寸和重量 尺寸：2,100 毫米 x 800 毫米 x 1,600 毫米 重量：约 1,500 kg 条件 条件：二手 功能齐全：经过测试且功能齐全 其他设备和配件包括： 筒夹卡盘 棒材送料机接口 该机器的主轴箱高度为 10 毫米
: 350 mm: 0650 mm: : 175 mm: 42 mm: 315 mm: 3500 U/min : D1-4 DIN 55029 : 63 mm: 140 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
系统： OSP-P 300S-H 旅行： X 轴：695 mm Y 轴行程：+150/ -150 = 300 mm Z 轴： 1,600 mm B 轴：240，定位精度为 0.001 C 轴：360 度，定位精度为 0.001 W 轴： 1,524 mm 车削直径： 650 mm 车削长度： 1,500 mm 安装：HSK 63 刀具位置总数：40 辅料： XA 和 YA 轴，带直接绝对测量系统 （Okuma ABSO 量表） 使用雷尼绍 X/Z 轴探头进行在线测量 Y 轴测量，包括斜轴模式下的测量 北川B215A11 最大 2,800 rpm 北川B210A8 最大 4,200 rpm 空心夹紧气缸 Kitagawa F 2596-H01 96 mm 一键式 IGF 软件多功能工具 谐波速度振荡 软件包 5 轴联动加工 输送 带高压泵的冷却液箱 70bar
Key data: 65 mm
CNC 车铣中心 使用的数控车床 数控万能车床 制造商： Traub 类型： TNA 300 制造年份：1996 主轴 ø 65mm 尾座 电动工具 输送 控制器 TX8H FlexIPS 公司 带 5 mm 至 65 mm 夹头的弹簧夹头 三爪卡盘 各种固定、旋转和角度旋转的刀架 等。。。 包括装料库 Traub DNH 61 3000，制造年份 1996 包括许多配件！ 机器位置：Nahe 93047 Regensburg 可以在现场查看机器。它仍然充满活力并且运行良好 我们很乐意听取您的意见
数控车床 Okuma Genos L200E-M 带龙门架 系统：OSP-200LA-R 制造年份：2012 年 10 月 最大车削长度 380 mm 车削直径 200 mm 床身回转直径 450 mm 主轴转速： 107 - 4,500 rpm 主轴通道：66 mm 刀塔：M-V12 （VDI） 速度刀具：50 - 6,000 rpm 快速进给 m/min： X： 20 / Z： 25 配件/设备 - ATPGR-03 型龙门式装载机工件尺寸 Ø 20 - 150 mm，最大工件重量 2 x 3 kg （双夹持器） 用于 OKUMA Genos L200E-M -输送 - Touchsetter （触摸打字机） - 液压尾座 -冷却液泵 （Coolant pump） - 工具
6 个主轴 割胶 交叉钻孔 滚丝机 铣削设备 很多配件 进给电机（主轴）有缺陷！ 带棒材送料机 IEMCA PRA 40/32 P
报价 24177 规格： - 尖端高度 180 毫米 - 中心宽度 1000 毫米 - 大流通量 – 床上 355 毫米 - 通过平板雪橇 200 毫米 - 主轴孔径 36 mm - 尾座套筒 MK 5 的拾取锥 - 尾座套筒行程 260 mm - 主轴转速 18 - 1800 rpm -饲料 - 横向滑轨的行程约 200 毫米 - 上滑梯的行程约 115 毫米 - 驱动 400 V / 5.8 kW - 带：- 尾座、3 爪衬里、表圈 - 钢架、移动中心冲头、 - 芯片托盘 - 空间要求 宽 2500 x 高 1500 x 深 1200 毫米 - 重量约 2100 千
max. Spindle speed: 5000 U/min.travel -x axis: 160 mmtravel -z axis: 450 mmnumbers of turret head positions: 12 tool taper: VDI 30 Control: Heidenhain iT Plus Dimensions (L x W x H): 4,5 x 2,5 x 2,5 mweight of the machine: 3700 kgCNC Turning- and Milling Center | DMG GILDEMEISTER - CTX 310Additional equipment:- C-AxisThe machine is in good condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: CTX310 | CTX-310The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
尖端高度： 205 毫米 中心宽度： 1500 毫米 圆周直径：床身上 410 毫米 主轴孔径： 47 mm 主轴支架：尺寸 6 捡拾锥尾座：4 MK 主轴转速： 28 - 1250 rpm 进给：纵向/平面 0.03-1.3/0.008-0.33 mm/rev 螺距： 0.25 - 76 mm 电气连接：380 V，3 kW 空间要求：2800 x 1100 x 1600 毫米 重量： 1330 kg
尖端高度：250 毫米 中心宽度： 2000 毫米 圆周直径：床身上 500 mm 主轴孔径： 50.8 mm 主轴支架：尺寸 6 捡拾锥尾座：5 MK 主轴转速： 22 - 2000 rpm 进给：纵向/平面 0.05-6.4/0.025-3.2 mm/rev 螺距： 80 - 1 mm 电气连接：380 V，5.5 kW 空间要求：3600 x 1100 x 1500 毫米 重量： 1875 kg
faceplate diameter: 1800 mmswing diameter: 2000 mmturning height: 1500 mmControl: SIEMENS 840 D workpiece weight max.: 5000 kgram head dimension: 250 x 250 mmtable turning speeds: 1 - 320 U/minpower capacity - table: 100 kWTorque: 31784 Nm0: 218 kwweight of the machine ca.: 55 tDimensions:- Turning diameter on the faceplate 2000 mm- Faceplate diameter 1800 mm- Turning height with turning head L100 1500 mmPower on the ram:- Clamping force of tool holder or accessories 120,000 N- Max. Feed force Z and X axis 30,000 N- Drive power of the milling, drilling and grinding spindle 37 kW- Speeds for turning 10 - 3000 rpmTravels:- Axis X, horizontal support on the crossbeam -2270/+2275 mm- Axis Z, vertical support on crossbeam 1250 mm- Axis C, table rotation 360°Feed speeds:- Axis X 15,000 mm/min- Axis Z 15,000 mm/min- Axis C 3.25 rpmCoolant system:- Coolant ...
faceplate diameter: 3200 mmswing diameter: 5100 mmturning height: 2505 mmcross rail - adjustment: 1500 mmmax. ram stroke: 1250 mmslide adjustment: 2000 mmcontrol: Siemens 8 T tool changer: 16 STK table load: 60 tfaceplate turning speed range -stepless-: 0,8-100 U/minfeed: 0,0 1-1000 mm/minrapid traverse: 6000 mm/mindrive of main spindle: 75 kWweight of the machine ca.: 70 tdimensions of the machine ca.: 9,3 x 6,1 x 6,0 mmachine is in an excellent conditionwith div. acessories (photos available)machine can be equipped with latest electrics and Siemens CNC control SINUMERIK 840D sl for additional costs.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0360 mm: 215 mm: 1000 mm: 180 mm: 45 mm: 3,75 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0350 mm: 196 mm: 0650 mm: 170 mm: 42 mm: 7,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0360 mm: 215 mm: 1000 mm: 180 mm: 45 mm: 2,25/3,25 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0460 mm: 1500 mm: : 230 mm: 78 mm: 400 mm: 2200 U/min : D1-8 DIN 55029 : 95 mm: 145 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0330 mm: 210 mm: 0635 mm: 167 mm: 40 mm: 2,2 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
