子类目
(三级类目)
生产厂家:
(品类: 102)
Key data: 1160 mm
现代WIA的强力立式数控车床 建设年份 2013年 FANUC 32i 手册指南 最大转弯直径1,160毫米 最大摆动直径1,355毫米 主主轴功率最高可达60千瓦 最大扭矩：6,490牛·米 C轴，分辨率为0.001° 12速BMT85P工具转塔 12个动力工具站 雷尼肖Q-Setter 现代WIA工具损坏监测 20巴冷却剂系统 铰链式碎屑输送机 800毫米三颚钩 Seoam CAS 32
Horizontal turning machine manufactured in 2014. This SEIGER SLZ 500E features a center distance of 1500 mm and a swing diameter over the bed of 500 mm. It is equipped with a powerful main drive of 20/25 kW and a maximum spindle torque of approximately 1400 Nm. If you are looking to get high-quality turning capabilities, consider the SEIGER SLZ 500E machine we have for sale. Contact us for further details regarding this machine.
Center height: 225mm, distance between centers: 1000mm, swing over bed/cross slide: 450mm/260mm, spindle bore: 65mm, max. spindle speed: 3000rpm, max. feed rate: 10m/min, tool turret: 4, main motor power: 7.5kW, control: Fanuc 0i Mate TC. Machine dimensions X/Y/Z: approx. 3500mm/1500mm/1700mm, weight: approx. 1550kg, operating hours: approx. 27000h, feed hours: approx. 1329h. Documentation available. An on-site inspection is possible.
车床 PPL 200-225 - 车床转弯直径：400-450毫米 - 转动直径：235-285毫米 - 带桥的偏移：旋钮直径600-650毫米 - 面板直径：350毫米 - 货箱宽度：320毫米 - 发动机功率：5.5马力 - 刀具行程：150毫米 状况良好，功能齐全，可以在现场观看和试用。 海外运输也包括。 观看： 基本上，我想指出的是，购买前可以在功率下查看和 试文章，以排除误解。购买前请多问，以避免混淆 如果您有任何一般性问题或想预约瞻仰，您可以随时 过下方或上方的电话号码联系我。 描述错误和之前销售记录除外。 增值税在我的发票上是单独显示的。 通过转运代理发货
数控车床 制造商：Gildemeister 类型：CTX 410 V3 机器编号：0136004581 制造年份：2006年 控制：西门子840D ShopTurn 周径：505毫米 夹头直径：210 主轴通道：65毫米 驱动功率：40/100% ED 21/28 KW 速度范围为 – 到 25-5000 尺寸约：4300x2000x1800 重量约：5600 公斤 - 12速左轮手枪 - VDI 40 - C轴 - 动力工具 12个工作站 - 封装棒加工 - 碎屑输送机 - 尾座 - SMW Autoblok 210BB - 驱动式刀具夹持 3 轴向 - 驱动式刀具夹持 2 次径向 - 各种其他刀具夹持 - 左轮手枪新发动机 错误除
数控车床 制造商：Gildemeister 类型：CTX 420 线性 V4 机器编号：02260005181 制造年份：2005年 控制：西门子840D ShopTurn 周直径：680 夹头直径：250 驱动功率：40/100% ED：37/25 KW 转速范围为 – 到 20-5000 转/分钟 重量约：6500公斤 - 12速左轮手枪 - VDI 40 - C轴 - 纵轴 - 动力工具 12个工作站 - 碎屑输送机 - 尾座 - SMW Autoblok 250 BH 错误除
数控车床 制造商：Gildemeister 类型：CTX 310 发动机编号：8042942713C 制造年份：2008 控制：海登海因 IT 周直径：500毫米 纺锤通道：65 驱动功率：40/100% ED：16/12 KW 转速范围为 – 至 25-6000 转/分钟 重量约：3500公斤 - 12速左轮手枪 - VDI 30 - 碎屑输送机 - C轴 - 动力工具 12个工作站 - 封装棒加工 - LNS QuickLoad Servo 3 短装载机 - 尾座 - Hainbuch ToplusMini Axzug 65 错误除
An INDEX CNC lathe with counter spindle and IEMCA bar feeder is offered. Main spindle bore: 65mm, max. spindle speed: 7000rpm, axes: 4, live tooling: possible, tool system: VDI25, spindle operating hours: approx. 80000h, control: Siemens 840D. 2) Bar feeder: IEMCA Master 880/MP 33 L, Year of manufacture: 2004, max. bar length: 3300mm, round bars: 8mm-80mm, hexagonal bars: 7mm-65mm, square bars: 10mm-50mm, max. bar weight: 120kg, min. remnant length: 110mm, bar feeder weight: approx. 1350kg. Including chip conveyor. Machine was continuously maintained. The machine is available from October. Documentation available. Inspection possible by arrangement.
Horizontal turning machine manufactured in 1997. This BOEHRINGER DUC 560/2000 features a maximum turning diameter of 570 mm and a turning length of 2000 mm. It includes an 8-position disc turret and a three-jaw chuck with a diameter of 200 mm. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER DUC 560/2000 machine we have for sale. Contact us for further details.
Horizontal turning machine manufactured in 2017. This KEY EAST BV-40160 features a swing over bed of 1,010 mm and a distance between centers of 4,000 mm. It includes a front and rear chuck diameter of 500 mm, along with a digital readout for enhanced precision. If you are looking to get high-quality turning capabilities, consider the KEY EAST BV-40160 machine we have for sale. Contact us for further details.
Control voltage: 24V DC, rated current: 85A, connected load: 39kVA, rated power: 49kW, control-on operating hours: 32,779h, automatic operation 1: 5,040h, automatic operation 2 operating hours: 1,844h, production time: 33,731h, length: 3231mm, width: 2076mm, height: 1917mm, weight: 4.8t, with documentation, chip conveyor and FMB turbo 8-80 bar feeder. An on-site inspection is possible.
Rated current: 60A, control voltage: 24V, connected load: 33kW, length: 2290mm, width: 1350mm, height: 1630mm, weight: 4.65t, operating hours: 78,439h, with documentation, chip conveyor and bar feeder. An on-site inspection is possible.
Vertical turning machine manufactured in 2007. This EMAG VSC 400 features a turning diameter of 400 mm and a swing diameter of 420 mm. It offers an X-travel of 850 mm and Z-travel of 315 mm, with a maximum spindle speed of 4000 rpm. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 400 machine we have for sale. Contact us for further details regarding this machine.
Horizontal turning machine manufactured in 2001. This EMCO EMCOMAT 200X1000 features a turning length of 1,000 mm and a maximum turning diameter over bed of 400 mm. It is equipped with a Fagor 8055 CNC control unit and includes a SMW AUTOBLOCK wedge-type chuck and a Multifix quick-change tool holder. If you are looking to get high-quality turning capabilities, consider the EMCO EMCOMAT 200X1000 machine we have for sale. Contact us for further details.
Horizontal turning machine manufactured in 1999. This Gildemeister CTX400 Serie2 features a maximum turning diameter of 420 mm and a distance between centers of 600 mm. It includes a disc turret with 12 tool stations and a maximum spindle speed of 5000 rpm. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX400 Serie2 machine we have for sale. Contact us for further details.
This 5-axis Mazak INTEGREX 200 III S was manufactured in 2004. It features a maximum turning diameter of 660 mm and a maximum workpiece weight of 150 kg. The machine is equipped with a tool magazine capacity of 80 slots and a rapid traverse speed of 38 m/min on the X and Z axes. If you are looking to get high-quality turning and milling capabilities, consider the Mazak INTEGREX 200 III S turn-mill centre we have for sale. Contact us for further details.
Distance between centers: 2000mm, control: Siemens Sinumerik 810, the controls flash memory is currently probably defective, but the parameters can still be accessed. an on-site inspection is possible.
A Buffalo CNC lathe in need of repair is offered for sale. Center height: 200mm, distance between centers: 880mm, chuck diameter: 160mm, swing over bed: 410mm, swing over cross slide: 230mm, bed width: 260mm, spindle bore: 46mm, spindle nose: A2-5, max. spindle speed: 5000rpm, X-axis travel: 190mm, Z-axis travel: 855mm, rapid traverse: 12m/min, tailstock quill diameter: 58mm, tailstock quill travel: 140mm, tailstock quill taper: MT4, control: Fagor 8055 TC. Accessories included. Dimensions X/Y/Z: approx. 2286mm/1800mm/2230mm, weight: approx. 2350kg. The feed motor of the spindle drive is defective. An on-site inspection is possible.
Max. turning diameter: 1000mm, max. swing diameter: 1250mm, max. workpiece diameter: 1000mm, max. workpiece length: 850mm, max. workpiece weight: 1000kg, X/Z travel: 1250mm/1000mm, max. speed: 900rpm, feed rate: 14m/min, rapid traverse: 20m/min, spindle nose: DIN 55026 short taper size A15, tool interface: DIN 69880 VDI60 tool holder, spindle diameter at the front bearing: 240mm, control: Siemens Sinumerik 840D. Machine weight: approx. 25t, space requirement: 85m². Equipment: SMW IN-D 1000 chuck, chip conveyor. The machine has no driven tools. Documentation available. Inspection possible by appointment.
Fuse protection: 100A, control voltage: 220V, operating voltage: 380V, connected load: 30,4kW, weight: 14,4t, with four-jaw chuck (diameter: 900mm), tailstock, quill, three steady rests and control system. An on-site inspection is possible.
Center height: 450mm, distance between centers: 3000mm, fuse protection: 630A, rated current: 46A, control voltage: 220V, operating voltage: 380V, frequency: 50Hz, connected load: 22,5kW, weight: 6,1t, with four-jaw chuck (diameter: 800mm), tailstock, quill and three steady rests. An on-site inspection is possible.
各种快速更换转环座/快速更换座/配件42个角色： 7件 WDL 4/50 16 WDR 4/40 10件 WDL 4/40 3个 WB 4/60⌀ 3件。WBW 4/60⌀ 1个。WBW 23/60⌀ 2个无类型 请告诉我们您感兴趣的商品，以便获得优惠。 我们很乐意为您提供更多照片
这里有一台Weiler DZ 65,16折Duplomatic船尾炮塔，2个主轴，两个主轴的夹头， 所有转速位置都有驱动工具， 碎屑输送机，通过双主轴冷却液，第二主轴弹簧喷射 ，杆送料连接，通过滴油托盘拆卸零件，零件输送 ，各种主轴插入管，碎屑输送机，物料进料Irco Profimat 3m，
垂直双主轴车削中心 - 控制西门子 840 D - 机床 VSC 400 Duo - 2座直径12 x 40毫米的盘式炮塔，驱动式 - 2个额外的钻井和埋头作业站 - 开放式工件运输系统 - 转移与转向单元 - 与外部处理系统的接口 - 中央冷却中心供水，高压泵，70巴 - 吹落拾取装置和夹持装置 - 工件测量 - 工具监控 - Emag网络选项 - 姊妹工具管理 周直径260毫米 X行程860毫米 Z行程200毫米 主主轴2 最高速度可达4500英里/分钟 主轴间距 1055 毫米 主驱动2 交流异步电机 6 次/100% ED 39/28 千瓦 最大扭矩460牛米 快速横移 x/z 45/30 m/min
杆径：8毫米至65毫米（圆形材料） 杆长（33升）：约3.3米 机床类型：固定主轴头（自动车床） 弹匣类型：MP弹匣（多弹匣
A Hitachi Seiki CNC turning center in need of repair is offered for sale. Max. turning diameter: approx. 255mm, max. turning length: approx. 380mm, X/Z travel: 200mm/400mm, spindle speed: up to approx. 3600rpm, spindle motor power: 11kW, bar capacity: approx. 64mm, spindle bore: approx. 78mm, chuck size: approx. 255mm, tool turret: 10/12-station, tailstock taper: MT5, control: SEICOS-L MULTI, version V3R5.G. Weight: approx. 4300kg. A tool holder on the chuck is broken. An on-site inspection is possible.
Cross slide NC1-left, X1-axis: 450mm, cross slide NC1-left, Z1-axis: 1980mm, cross slide NC2-right, X2-axis: 450mm, cross slide NC2-right, Z2-axis: 1980mm, M-head slide-left, Q1-axis: 1980mm, M-head slide-right, Q2-axis: 1980mm, tailstock + steady rest slide-left, W1-axis: 1980mm, tailstock + steady rest slide-right, W2-axis: 1980mm, Y-axis: +/-65mm, workpiece length: 760-3000mm, workpiece clamping diameter: 20-200mm, main drive power: 2x 37kW, main drive speed (stepless): 0-2200/min, tool drive speed (stepless): 0-2320/min, tool holder: VDI50, tailstock center: MK 5, number of tool holders: 12, steady rest: SLU-5 SO, steady rest clamping diameter: 20-200mm, working height: 1300mm, max. workpiece diameter: 20-200mm, max. workpiece weight: 250kg, workpiece drive/clamping: 2x hydraulically operated SAV front-end chucks, max. chuck through-bore diameter: 210mm, spindle power: 2x 37kW, max. ...
