焊接台 (147)

Lg.Nr 26071 技术数据： - 载重能力 650 千克 - 面板尺寸：700 x 700 毫米 - 面板 mot。无限可倾斜 0 - 135 ° - MOT。旋转机芯无限调节，转速0.07 - 1.5转/分钟 - 水平位置的桌面高度：890毫米 - E. 控制键 - 空间需求约宽850 x 高890 x 宽 1200毫米 - 重量约400 公�

Welding table with torch and material cabinet including contents Pick-up date: 17.08 - 19.08 Auction-ID: A1-48584-86

Lg.Nr 25075 莫特。焊接旋转和倾斜工作台 规格： - 负载能力 1000 kg - 面板直径 800 mm - 面板可通过电机倾斜 - 旋转运动电动。无级变速 0 - 250 cm/min - 焊接电流传输 650 A - 驱动 400 V / 2.8 kW - 水平位置的工作台高度约为 1100 毫米 - Re- + 逆时针旋转 - 空间要求 宽 1200 x 高 1100 x 深 1500 毫米 - 重量约 850 千克

Welding Table Type: Welding table Finish: Anti-corrosion paint or powder-coated finish Flatness: ≤ 0.2 mm/m Hole diameter: Ø 14 mm – 22 mm (depending on model) Standard spacing: Square grid (e.g. 100 mm x 100 mm) or rectangular pattern Maximum evenly distributed load: approx. 1,500 kg – 3,000 kg or higher Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-48274-44

Key data: 1180 mm, 990 mm, 765 mm

重型焊接和夹紧台 1,180 x 990 毫米 高度 765 毫米 夹紧槽宽度 34 mm 材料厚度 40 毫米 重量约 1,020 kg

Set 5: 125 pieces, 28mm system, consisting of: Ferrules: 14 x 280610.N Ferrules: 10 x 280630.N Prism: 6 x 280648.1.N Bolts: 36 x 160511 Magnetic Bolt 8 x 280740 Stop: 12 x 280410.N Stop: 12 x 280420.N Stop: 4 x 280430.N Angle: 12 x 160110.N Angle: 2 x 280152.N Angle: 2 x 280162.N Angle: 1 x 280164.N Angle: 1 x 280165.N Angle: 1 x 280166.N Angle: 1 x 280167.N Angle: 1 x 280144.N Angle: 1 x 280146.N Trolley: 1 x 280910 Accessory set. 1 x 283999 Number of 106 Lots Weight 283 kg Condition new Hole diameter 28 mm Auction-ID: A7-48486-165

机器类型：焊接转盘 制造：美库尔/康泽尔曼 型号 CD 50/25 - 320 连接电压 1 x 230 V 速度范围 0.25 – 2.5 rpm，无级变速 速度控制 1 ： 10 扭矩 2.5 – 10 Nm 面板直径 250 mm 面板 - 内部通道 10 mm 面板倾斜角度 135 垂直负载能力 0.5 kN = 50 kg 工作台高度 320 mm 手动倾斜运动，可夹紧 倾翻扭矩 90 Nm 受电弓 400 A 80 % 直流 连接方式 - 脚踏开关简单 - 双脚踏开关 - 脚遥控 年龄 3 岁 条件：和新的一样好 重量 44 kg 保修期为自交货之日起24个月 原价 €2，198.00 + 增值税 报价 €1，690.00 + 增值税 脚踏开关简单，带 3 米电缆 239.00 € + 增值税 019.0.2900 带 3 米电缆的双脚踏开关 389.00 € + 增值税 019.0.2901 带 5 米电缆的脚踏遥控器 529.00 € + 增值税 N019 ...

Welding table on lift table: Hole diameter: 28mm The table is made of 15mm thick steel S355 The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Sidewalls 150 x 10mm Ribbed underside for reinforcement. Table length 2000 mm Table width 1000 mm Load capacity 2000 kg Lifting height max. 1525 mm Total connected load 1.5 kW Connection voltage 400 V Condition: never used / new (5) Auction-ID: A7-48486-2

焊接排烟台 焊接台DCE UMA150HG5除尘 带集成吸入器的焊接工作台，带过滤器 制造商粉尘控制设备除尘器 型号 UMA 150H G5 根据照片休息

Welding Table / Perforated Table incl. accessory set WMT Basic-Set 2.0 The table is made of 25mm high-alloy, Plasma nitriding steel S355J2+N (St 52/3) Surface hardness 850 Vickers Grinded surfaces, Planed. Hole diameter: 28mm, Holes lowered 3mm. Grid 100 x 100mm Sidewalls 200mm Bore spacing in the sidewalls 50mm, Diagonal grid. Height adjustable from approx. 830 - 890mm Substructure reinforced with flat steel 140 x 15mm incl. bottom bearing diameter 110mm Table length 2000 mm Table width 1000 mm Table height 900 mm Table load 3000 kg Machine weight approx. 0.45 t Dimensions L x W x H 2.0 x 1.0 x 0.9 m Auction-ID: A7-48486-78

规格： - 负载能力定位表约 750公斤 - 面盘直径 500 mm - 工件直径 1600 mm - 高度转盘，水平位置约为 750 毫米 - 带右转盘，- + 左旋转 - 旋转轴转盘无尽360 - 每转旋转时间 12.5 秒 - 向左+向右旋转 - 旋转轴旋转角度 180 - 旋转时间为180旋转角度10秒。 - 2 x 双脚按钮，用于转盘 + 旋转臂 - 海德。夹紧螺栓，用于在转盘中间夹紧工件 - 夹紧螺栓的夹紧行程/夹紧行程 32 mm - 锁模力压制/拉动 80 / 48.9 kN - 夹紧气缸内螺纹 M 27 x 40 - 西门子定位控制 - 手动操作或通过控制操作 - 空间要求约为 宽 1500 x 深 2800 x 高 1100 mm - 重量约 2500公斤 - 带高频装置的独立控制柜 - 高频工�

10 pcs quick-release clamping bolts for 28mm system Plate thicknesses 25mm Quantity: 10 pcs. Hole diameter 28 mm Weight 10 kg Dimensions L x W x H, 0.3 x 0.3 x 0.2 m Condition: never used / new (5) Auction-ID: A7-48486-183

Basic Set 4 / 53 pieces for table top thickness 15mm and 25mm 6 pcs screw clamps 14 quick-clamping bolts 2 pcs universal stop 100mm 6 pcs universal stop 150mm 4 pcs universal stop 225mm 2 pcs universal stop 300mm 2 pcs stop and clamping angle 75mm 4 pcs stop and clamping angle 175mm 4 pcs stop and clamping angle 275mm 2 Prisms 60mm 1 Burner Holder 1 pc. eccentric stop 100mm diameter 1 pc. hole brush 30mm 2 pcs separating lotion 500ml, on a natural, bio-based 2 pcs welding table cleaner 500ml, on a natural, bio-based Condition: never used / new (5) Auction-ID: A7-48486-209

Set 3: 77 pieces, 28mm system, consisting of: Ferrules: 10 x 280610.N Ferrules: 6 x 280630.N Prism: 4 x 280648.1.N Bolt: 24 x 160511 Magnetic Bolt 4 x 280740 Stop: 8 x 280410.N Stop: 8 x 280420.N Angle: 6 x 160110.N Angle: 2 x 280152.N Angle: 2 x 280162.N Angle: 1 x 280166.N Angle: 1 x 280167.N Accessory set. 1 x 283999 Number 77 Lots Weight 146 kg Condition new Hole diameter 28 mm Auction-ID: A7-48486-204

Mobile Welding Lift Table/Perforation Table: Hole diameter: 28mm Hole spacing 100mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Ribbed underside for reinforcement. Table length 1200 mm Table width 800 mm Hole diameter 28 mm Table height 450 - 800 mm Load capacity 500 kg Machine weight approx. 0.8 t Condition: never used / new (5) Auction-ID: A7-48486-72

Set 4: 110 pieces, 28mm system, consisting of: Ferrules: 14 x 280610.N Ferrules: 10 x 280630.N Prism: 6 x 280648.1.N Bolts: 30 x 160511 Magnetic Bolt 8 x 280740 Stop: 10 x 280410.N Stop: 10 x 280420.N Stop: 4 x 280430.N Angle: 8 x 160110.N Angle: 2 x 280152.N Angle: 2 x 280162.N Angle: 1 x 280164.N Angle: 1 x 280165.N Angle: 1 x 280166.N Angle: 1 x 280167.N Trolley: 1 x 280910 Accessory set. 1 x 283999 Number of 106 Lots Weight 283 kg Condition new Hole diameter 28 mm Auction-ID: A7-48486-159

10m Screw Clamps Projection 120mm Length 300 mm Condition new Hole diameter 28 mm Number of 10 Lots Weight 30 kg Condition new Hole diameter 28 mm Condition: never used / new (5) Auction-ID: A7-48486-213

Basic Set 2 / 32 pieces for table top thickness 15 and 25mm 6 pcs screw clamps 12 pcs quick-clamping bolts 2 pcs universal stop 100mm 4 pcs universal stop 150mm 2 pcs universal stop 225mm 2 pcs stop and clamping angle 175mm 1 pc. hole brush 300mm 1 Burner Holder 1 non-stick spray 500ml, on a natural, bio-based 1 pc. welding table cleaner 500ml, on a natural, bio-based Condition: never used / new (5) Auction-ID: A7-48486-156

Welding table / hole table with accessories: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Sidewalls 165mm Height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. incl. floor storage Pictured accessories included! Surface flatness 0.2 - 0.4mm to 1000mm. Very stable base, This allows the table with pallet truck. Table length 2400 mm Table width 1200 mm Table height 850 - 900 mm Machine weight approx. 0.65 t without pallet truck Condition: never used / new (5) Auction-ID: A7-48486-114

Basic set 3 / 43 pieces for table top thickness 15mm and 25mm 6 pcs screw clamps 12 pcs quick-clamping bolts 6 pcs universal stop 150mm 4 pcs universal stop 225mm 2 pcs universal stop 100mm 2 pcs stop and clamping angle 175mm 2 pcs stop and clamping angle 275mm 2 Prisms 60mm 1 pc. eccentric stop 100mm diameter 1 Burner Holder 1 pc. hole brush 30mm 2 pcs separating lotion 500ml, on a natural, bio-based 2 pcs welding table cleaner 500ml, on a natural, bio-based Condition: never used / new (5) Auction-ID: A7-48486-168

Special set 31 pieces, 28mm system, consisting of: 1x Tool Trolley 10x Staking Bolts 10x Ball Lock Pin 3x Professional Screw Clamp, 300 x 150mm 3x Professional Screw Clamp, 300 x 200mm 2x Professional Pipe Screw Clamp 180° 2x Professional Pipe Screw Clamp 45° Material: Burnished quality steel ATTENTION Tool is designed for 25mm table top thickness. Number of 96 Lots Weight 600 kg Condition new Hole diameter 28 mm Auction-ID: A7-48486-132

Welding table accessories P-Set 1: 27 pieces, 28 mm system (for 15 mm table thickness), consisting of: Clamps: 5 Sk.100/350 mm Stop: 2 pieces 500mm Stop: 2 pieces 150mm Angle: 2 pieces 175 x 175 mm Flat angles: 2 pieces. 350 x 250 mm Flat brackets: 2 pieces 275 x 150 mm Eccentric discs 2 pcs. 100mm Quick-release screws: 10 pcs. Number of 33 Lots Weight 52 kg Condition new Hole diameter 28 mm Condition: never used / new (5) Auction-ID: A7-48486-174

Welding table / hole table: with milled and deburred holes Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Sidewalls 165mm Height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. incl. floor storage Accessories optional Surface flatness 0.2 - 0.5mm to 1000mm. Table length 2990 mm Table width 1490 mm Table height 850 - 900 mm Machine weight approx. 0.8 t Auction-ID: A7-48486-117

10 pcs quick-release clamping bolts - 28mm hole system - For 25mm table thickness Quantity: 10 pcs. Clamping range 25 mm Hole diameter 28 mm Weight 10 kg Dimensions L x W x H 0.3 x 0.3 x 0.2 m Auction-ID: A7-48486-149

Workstation - Hole diameter: 28mm - Grid 100 x 100mm - Sidewalls 150mm - Panel thickness 10mm Table length 1200 mm Table width 800 mm Table height 980 mm Payload kg Machine weight approx. 0.95 t Auction-ID: A7-48486-10

10 pcs quick-release clamping bolts for 28mm system Clamping range from 5 to 50mm Quantity: 10 pcs. Clamping range 15 - 50 mm Hole diameter 28 mm Weight 10 kg Dimensions L x W x H 0.3 x 0.3 x 0.2 m Condition: never used / new (5) Auction-ID: A7-48486-218

5 pcs screw clamps for hole diameter 28mm Projection max. 245mm Handle made of aluminium see pictures Condition: never used / new (5) Auction-ID: A7-48486-182

Marking table with groove 22 x 22mm Table area 1600 x 800mm Table height 890mm Weight 800Kg see pictures Auction-ID: A7-48486-93

Welding table / straightening table - Panel thickness 80mm - Panel thickness incl. frame 360mm Table length 4900 mm Table width 1300 mm Table height 980 mm Machine weight approx. 5.6 t Dimensions L x W x H 5.0 x 1.3 x 0.6 m Auction-ID: A7-48486-34

Welding table / hole table: with milled and deburred holes Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Sidewalls 165mm Height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. incl. floor storage Accessories optional Surface flatness 0.2 - 0.5mm to 1000mm. Technical data: Table length 2400 mm Table width 1200 mm Table height 850 - 900 mm Machine weight approx. 0.65 t Auction-ID: A7-48486-129

Siegmund Set 2, 57 pieces, 28mm system, consisting of: 18x quick-release bolts with twist lock short, without O-rings 6x Universal Stop 150 L - Nitrided 6x Universal Stop 225 L - Nitrided 4x Stop and clamping angle 175 L - Nitrided 2x Stop and clamping bracket 300 G left - Nitrided 2x Stop and clamping angle 500 G left - Nitrided 4x Prism Ø60-135° burnished - with collar Complete with shovel and countersunk head 6x Professional Screw Clamp - Nitrided 4x Professional Screw Clamp 45°/90° - Nitrided 4x Magnetic Bolts Aluminium 1x accessory set (283999) consisting of: eccentric, Allen keys, brush, whetstone, Sample CleanBasic, Sample non-stick and burner holder. Condition: never used / new (5) Auction-ID: A7-48486-144

XXL starter package, consisting of: - 15x – Standard clamping pliers - 5x – Multi-clamping pliers - 10x – Side clamp with eccentric - 15x – Loose Cam H30 - 10x – Loose Cam H100 - 2x – Pipe Insertion Knock Series - 10x – quick-release bolts - 10x – Stop block 15mm - 4x – Right Angle XL - 6x – Right angle - 6x – Angle of attack - 1x – Box - 1x – Insert holder - 1x – Allen key - Tool trolleys Number of 100 Lots Hole diameter 28 mm Condition new Weight 280 kg Dimensions L x W x H 1.2 x 0.5 x 1.3 m Condition: never used / new (5) Auction-ID: A7-48486-116

Basic Set 2: 51 pieces, 28mm system, consisting of: Ferrules: 8 x 280604 Bolts: 12 x 280511 Stop: 8 x 280420.N Angle: 4 x 280110.G Threaded bolt 8 x 280543 Stop 8 x 160415 Stop 2 x 284050 Accessory set. 1 x 163999 Condition: never used / new (5) Auction-ID: A7-48486-163

Welding table \"SIGMUND Professional 750 + plasma nitrided\" is made of high-quality steel S355J2+N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm increments on the table top, parallel hole arrangement in 50 mm increments on the sides. Incl. basic foot equipment. Pictured accessories optional. Table length 1200 mm Table width 800 mm Table height 850 mm Height adjustment 50 mm Machine weight approx. 0.35 t Dimensions L x W x H 1.2 x 0.8 x 0.9 m Condition: never used / new (5) Auction-ID: A7-48486-8

Welding table / hole table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Sidewalls 165mm Ribbed underside for reinforcement. incl. floor storage Accessories optional Surface flatness 0.2 - 0.4mm to 1000mm. - With drawer unit - Grid shelf - Heavy-duty castors steerable Worn welding accessories not included Table length 2400 mm Table width 1200 mm Table height 850 - 900 mm Machine weight approx. 0.65 t Dimensions L x W x H 2.4 x 1.2 x 0.95 m Condition: never used / new (5) Auction-ID: A7-48486-131

Siegmund workbench incl. accessories - consisting of screw clamps, Hand clamping bolts, Wing clamping bolts and angles. - Frame made of aluminium profiles - Working height 900 mm - Surface made of aluminium table profiles - Bore Ø 16 mm - Bore spacing 50 mm - Hexagon Nut HX8 - Hexagon groove spacing 50 mm - When clamping aluminium parts, the bolts must only be tightened by hand. Table length 1200 mm Table width 700 mm Table height 900 mm Table load 250 kg Machine weight approx. 36 kg Dimensions L x W x H 1.2 x 0.8 x 0.9 m Condition: never used / new (5) Auction-ID: A7-48486-121

Special set 102 pieces, 28mm system incl. tool trolley Material: Burnished quality steel Scope of delivery see pictures Number of 102 Lots Weight 320 kg Condition new Hole diameter 28 mm Dimensions L x W x H 1.0 x 0.6 x 0.85 m Auction-ID: A7-48486-197

Welding table / hole table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Sidewalls 165mm Height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. incl. floor storage Accessories optional Surface flatness 0.2 - 0.4mm to 1000mm. Table can be moved with pallet truck. Pallet truck is not included in the scope of delivery Table length 2990 mm Table width 1490 mm Table height 850 - 900 mm Machine weight approx. 0.8 t Condition: never used / new (5) Auction-ID: A7-48486-96

Set 1 - 33 pieces, 28mm system, consisting of: 12x quick-release bolts with short twist lock, without O-rings 4x Universal Stop 150 L - Nitrided 4x Universal Stop 225 L - Nitrided 2x Stop and Clamping Angle 175 L - Cast Iron 2x Stop and clamping bracket 300 G left - Nitrided 2x Prism Ø60-135° burnished - with collar Complete with shovel and countersunk head 4x Professional Screw Clamp - Nitrided 2x Professional Screw Clamp 45°/90° - Nitrided 1x accessory set consisting of: eccentric, Allen keys, brush, whetstone, Sample CleanBasic, Sample non-stick and burner holder. Condition: never used / new (5) Auction-ID: A7-48486-128

Welding table / hole table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Sidewalls 165mm Height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. incl. floor storage Pictured accessories are not included! Surface flatness 0.2 - 0.4mm to 1000mm. Very stable base, This allows the table with pallet truck. Table length 2400 mm Table width 1200 mm Table height 850 - 900 mm Machine weight approx. 0.65 t Accessories on the table and pallet truck are not included Condition: never used / new (5) Auction-ID: A7-48486-43

Basic Set 3: 69 pieces, 28mm system, consisting of: Ferrules: 10 x 280604 Bolts: 18 x 280511 Stop: 10 x 280420.N Angle: 6 x 280110.G Angle: 4 x 280162.N Threaded bolt 8 x 280543 Stop 8 x 160415 Stop 4 x 284050 Accessory set. 1 x 163999 Condition: never used / new (5) Auction-ID: A7-48486-180

Siegmund Workbench Perforated plate made of high quality steel S355J2+N + plasma nitriding - 16 mm bore - Holes in 50x50 mm increments - Material thickness approx. 12 mm - Height adjustable from 800 to 975 mm - Frame made of aluminium profiles Table length 1200 mm Table width 800 mm Table height 800-975 mm Table load 250 kg Machine weight approx. 108 kg Dimensions L x W x H 1.2 x 0.8 x 0.85 m Condition: never used / new (5) Auction-ID: A7-48486-175

Welding table / hole table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Sidewalls 165mm Height adjustable from approx. 840 - 890mm Ribbed underside for reinforcement. incl. floor storage Accessories optional Surface flatness 0.2 - 0.4mm to 1000mm. Table can be moved with pallet truck. Pallet truck is not included in the scope of delivery Table length 1200 mm Table width 800 mm Table height 840 - 890 mm Machine weight approx. 0.3 t Condition: never used / new (5) Auction-ID: A7-48486-51

Basic Set 1 37 pieces, 28mm system, consisting of: Clamps: 4 x 280604 Bolts: 8 x 280511 Stop: 6 x 280420.N Angle: 2 x 280110.G Threaded bolt 8 x 280543 Stop 8 x 160415 Accessory set. 1 x 163999 Hole diameter 28 mm Condition new Weight 29 kg Condition: never used / new (5) Auction-ID: A7-48486-135

Basic set 1 / 24 pieces for table top thickness 15 and 25mm 4 pcs clamps clamping height 300mm, Variable radius 8 pcs clamping bolts 2 pcs stop 100mm 4 pcs stop 150mm 2 pcs stop 225mm 1 Burner Holder 1 pc. hole brush 30mm 1 pc separating lotion 500ml 1 pc. welding table cleaner on natural, organic base 500ml Number of 24 Positions Weight 22 kg Auction-ID: A7-48486-189

5 pcs screw clamps for hole diameter 28mm Projection max. 245mm Handle made of aluminium see pictures Condition: never used / new (5) Auction-ID: A7-48486-198

10 pcs quick-release clamping bolts for 28mm system Clamping range from 5 to 50mm Quantity: 10 pcs. Clamping range 15 - 50 mm Hole diameter 28 mm Weight 10 kg Dimensions L x W x H 0.3 x 0.3 x 0.2 m Condition: never used / new (5) Auction-ID: A7-48486-97

Welding table / hole table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Sidewalls 165mm Height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. incl. floor storage Accessories optional Surface flatness 0.2 - 0.4mm to 1000mm. Very stable base, This allows the table with pallet truck. The accessories shown are optional Table length 2000 mm Table width 1000 mm Table height 850 - 900 mm Machine weight approx. 0.45 t Condition: never used / new (5) Auction-ID: A7-48486-88

Special set 96 pieces consisting of: 1x Tool Trolley 30x quick-release bolts with twist lock short, without O-rings 8x Universal Stop 150 L - Nitrided 4x Universal Stop 225 L - Nitrided 8x Stop and clamping angle 175 L - cast iron 2x Stop and clamping angle 500 G left - Nitrided 1x Stop and clamping bracket 750 G left - Nitrided 1x Stop and clamping bracket 750 G right - Nitrided 1x Stop and clamping angle 500 G left - Nitrided 1x Stop and clamping angle 500 G right - Nitrided 4x Stop and clamping angle 300 G left - Nitrided 8x Prism Ø60-135° burnished - with collar Complete with shovel and countersunk head 16x Professional Screw Clamp - Nitrided 6x Professional Screw Clamp 45°/90° - Nitrided 4x Universal Stop 300 - Nitrided 1x accessory set consisting of: eccentric, Allen keys, brush, whetstone, Sample CleanBasic, Sample Non-stick and burner holder. Condition: never used / new ( ...

Welding table / hole table: Hole diameter: 28mm Hole spacing 100mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Ribbed underside for reinforcement. Table length 4000 mm Table width 2000 mm Hole diameter 28 mm Table height 815 mm Machine weight approx. 1.3 t Auction-ID: A7-48486-118