Used Van Dam 568 , 8-Color Cup Printing Line :-, Auto Elevator Tray Feeder, Cross conveyor, Cup Stack feeder to Main Print Unit, Universal Screw Denester, Corona Pretreater with Leak Tester, Main 8-Color Print unit., Each Print head consisting of : 8 x precision ground rollers., 2 x Form Rollers, 2 x Oscillating Rollers - water cooler. Gear driven Fountain Rollers., All eight heads swing open for easy plate mounting and free roller accessibility., Easy axial and peripheral fine register adjustment of the plate cylinder while the press is running., Speed continuously variable., UV-On Mandrel Curing Unit, Dual Timing Belt Take-Off, Counter/ Stacker Unit, with Ejector Tray, Max. Cup Rim dia. 150 mm. Max. Taper 10°. Max. Print height 150 mm. Max., PLC Controls. OPC with Touch Pad Controls and Color Display., Max. Production Speed 600 Cups/ min depending on Cup size & Shape
2台二手工具-Termp TT-162 H/P H E 模具温度调节器，400伏3ph 50 Hz，14kW，泵通过泵流量19.8加仑/分钟，产地：瑞士， 地：瑞
BVM Compacta 5022 EGS Sleever + Inline BVM SC 4530 Heat shrink tunnel, Age 2014, Infeed flighted Conveyor length 1200 mm (approx.), BVM grouping System:, For production of multipacks of upto 4 Stacks side by side, consisting of:, Transport conveyor, width 400 mm, length 1000 mm (approx.), 1 Rake on top with mechanical positioning via frequency converter in servo mode, Including pneumatic flap for producing multipacks of 1, 2, 3 or 4 Stacks side by side, Max. length of Stacks 630 mm, BVM fully enclosing packing/ Sleeving machine Compacta 5022. Fully automatic, fed by conveyor belt with photocell control, including 100 format-data storage locations, Technical Data:, Service side standard : left had side, Sealing length : 500 mm, Passing Height : 220 mm (standard), Belt width infeed/ outfeed conveyor : 400 mm, Speed : upto 120 cycles/ min , Length sealing : continuously working, Film width ...
使用Illig RDM 37/10，带顶部加热器，无片下垂控制，加热器手动前 ，自动展开支架，机械定位，自动启动机构，气动塞 子辅助，成型面积475 x 250毫米，最大胶片宽度495毫米，最大拉幅100毫米，1975 年，基础机器，生产状态，请出价
二手
一台状况极佳的Illig真空热成型机，使用量很少，立 可用 尺寸 6×5米，包含控制柜及相应的刹车装置 图片待续
WEYHMÜLLER CBU-ISO 10332 automatic COMBIPACK Machine for the application of Pre-Printed Blanks onto Round Cup/ Rectangular Container Walls,, Age 2017 only used for ca. 8000 hrs., The Combipack Thin-Walled Cup/ Containers (Products) use up to 60% less material than conventional thermoformed Products, the applied paper Blanks provide stability & strength. The Paper Blanks can be easily separated for recycling purposes., Machine Consisting of:-, • Elevator Tray Feeder, • Cup/ Container In-Feed Conveyor, • Universal 4 x Screw Denester, • Indexing Turret with 8 x Mandrels, • Turret Indexes to:, Cup/ Container infeed Station, Blank Feeder Station, Glue application Station, Blank Forming/ Folding Station, Glue Drying Station, Cup/ Container Bottom Labelling Position, Counter/ Stacker Station, • Pre-printed Blanks horizontal accumulator In-Feed Conveyor to:, • Vertically stacked B ...
模具和Matic PET圆盖模具，直径为95毫米。杯子，10-Cavity，2009年12 ，与Stacker Parts合作。为Gabler D600制
ILLIG RDM70K 模具，直径70毫米，适用于PP杯，21个腔体，1995年，含 一套插入件和带刷杆的堆叠篮
ILLIG RDM70K 模具，适用于75毫米dia. PS杯，21腔，含一套插入件，无堆叠篮，年份为1995年 缺少刻有雕刻的杯底盘，因为这些是前任所有者的知 识产权。使用非常稀少
PET Coextrusion + Inline ILLIG RDKP72g Thermoforming Line, Age 2010, this equipment is suitable for PET, PP & PS Trays, Fruit & Vegetable baskets etc. :-, Inline S Plastic SRL PET Coextrusion line to produce pet sheet in-line with ILLIG RDKP72g 4-Station Thermoformer (.samplastco. hole punch station) Age 2010 :, Maximum output 680 kg/ hr, Maximum sheet width 800 mm, The line includes:, Electrical Control Panel, MSM Plastic Engineering Gravimetric Feeder, fed directly from the PET Dryer + additional Component for masterbatch or additive, Main extruder Model ED 100-40 dia. Ø100 mm, L/D 40, BP Plast BDO X2 100 Double plate hydraulic screen changer, MAAG Gear pump, Co-extruder Model E60-40 dia. Ø60 mm, L/D 40 with Gravimetric feeder, BP Plast Single plate hydraulic screen changer, MAAG Gear pump, 3- Layer (ABA) Melt Feed Adapter, Special extrusion die for PET, width 900 mm, 3-Roll Polished ...
Lid Mold Manufactured by TERMOSTAMPI to fit Drinking Cups Ø98 mm, Age 2022, Forming mold 24 cavities (6 x 4 arrangement), 2 sets of inserts for:, Dome Lid For Cup Ø9 8mm ., Flat Lid For Cup Ø 98mm, Hole Punch Mold - Punch and Die., 24 cavities to Punch 24 holes diam.25 mm on Dome Lid., 24 cavities to Punch 24 cross cut., Steel Rule Pucning Mold :, with 24 cavities for both Dome and Flat Lid., Stacking Device:, for Domes and Flat Lids
ILLIG RDM75Kc的PP-饮用杯模具，由TERMOSTAMPI制造，2022年产，带 有成型和修剪工艺，适用于直径98毫米的PP杯，适用于 ILLIG RDM 75Kc，包含：24个腔体（6×4个排列），配备修剪刀、腔 体插入件、挤出器、下垫，以及4系列用于以下PP饮杯 插入件：-，24盎司， 20盎司、16盎司、12/14盎司，包含ILLIG PH75计数器/堆垛机的堆垛零
1 x Used Wrapping Machine WM FC780 E, age 2005, Unwinder:, Single Reel holder, Max. reel diameter 1,200 mm, Thermoforming machine:, Max. tool size 780 x 570 mm, Max. tool size with pneumatic clamp frame 750 x 570 mm, Max. positive depth 130 mm, Max. negative depth 130 mm, Max. sheet width 810 mm, Max. sheet indexing 570 mm, Max. HIPS sheet thickness 1.8 mm, Max. EPS sheet thickness 3 mm, Max. platen stroke (upper – lower) 150 mm, Heater length 1,775 mm, Clamping force DaN 20,000, Upper heating, installed power Kw 41, Lower heating, installed power Kw 41, Vacuum pump motor Kw 2,2, Platen driving servo motor (each) Kw 7.5, Sheet index servomotor Kw 11, Dry cycle speed 45 Cycles/ min, Processing air pressure 7 bar, Water consumption at + 12° C. 60 L/ min, Air consumption at 7 bar 50 L/ cycle, Cutting Press:, Max. cut dimensions 760 x 550 mm, Platen clamping force DaN 60,000, Upper platen ...
ILLIG RDM70Kb塑料杯模具，直径73毫米32腔，配备带杆子、刷 和耙子的堆叠篮，1997年5月，制造商：MARBACH
1 x 二手 ILLIG RDM70K PP-模具，5 个 Cavites，草莓容器 174 x 103 x 90 毫米，陈年2005年12月。产品图纸随附
AVIAN 工程磨床 G46/60,2003年产，包括：驱动进料夹紧辊主电机 20千瓦鼓风机 2千瓦旋转叶片 6件固定刀片 4件装 300公斤/小时切割室 620 x 460毫米料斗开口 620 x 500毫米，鼓机良好生产状况。EXW在德国Enger仓
打印机和热成型机备件包括：- GABLER 702/703 完整控制柜 ILLIG VHW 72 进料调节 VAN DAM 叶片真空泵 Norgren 塞子辅助 气缸 骨架废料排风机 20 个 ILLIG RDM 70K 68mm PP 杯模具零件 1 个塑料箱 Polytype DDM 300 备件 2 个 VAN DAM 鹅颈杯送料器， 1台倾斜输送杯送料机，8台板式圆筒组装机，BDM 301R
ILLIG RDM75K Thermoformer age 1998, refurbished in 2019 with Siemens S5 PLC Controls, used only for ca. 50,000 hrs, Consisting of:, ELAU B1 Display with Touchpad controls Thermoformer with auto-start facility Indramat Servomotor Indexing Max. material width 750 mm Max. Indexing length 480 mm Top & Lower heaters, total connected load top & bottom heaters 111.3 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 700 x 450 mm Hydraulic Cylinder Plug Assist with Bosch Rexroth Hydraulic Power Pack, completely Overhauled in 2019 Max. Part height 150 mm Max. Mold closing force 25,000 daN Auto Lubrication system Siemens S5 PLC Controls New original ILLIG/ RITTAL Control Cabinet Cooling System added in May-2023., No Tooling or Format Parts are included with the Line., Max Stacking Area: 750 x 350 mm, Min dia. of product: Ø 40 mm, Max dia. of Product: Ø 150 mm, Total Dri ...
1 x 二手 ILLIG RDM70K PP 模具，用于 8 腔矩形容器，145.5 x 65.3 x 41 毫米，年龄为 2007 年 12 月。附上产品图纸
： 250 立方米/分钟： 200 毫巴总功率要求： 5.5 kW此广告的数据是使用 ModulMWS 创建的 - LogoTech oHG 的软件解决方案
Age: 1994, For sale outside Europe, Consisting of:, Automatic Elevator Tray-feeder Cross Conveyor to main Print unit Universal screw Denester CUBITRON Corona Pretreatment System 8-mandrel Indexing Turret, with Mandrel Holders for Cups 6 x individually hinged dry-offset Print Heads Each Print Head consisting of Print cylinder, radial and axial Print adjustment with micro-register during operation of the Printer, 2 x Form Rubber Rollers dia. 71 and 100 mm 2 x Oscillating rollers 2 x Idler Rollers 1 x Ink Transfer roller (Ductor Roller) 1 x Ink Fountain, Ductor Rollers water cooled Ink Washing System on Print Heads UVITERNO Dual Lamp UV Curing-On-Mandrel Dual Belt Take-off with Air Assist Short conveyor to counter Stacker station Return Elevator Tray Feeder, Printer in production with Yogurt Cups at 444 Cups/ min Siemens SIMATIC S5 PLC Controls V. Good Production Condition, can be inspected ...
Used ILLIG STAL80 Trim Press, age 2004:-, Technical data ILLIG STAL 80 :, Punching table area max. 1000 x 510 mm, Material width max. 800 mm, Infeed length 20 - 400 mm, Stroke height 200 mm, Mold height 272 mm, Part height (positive and negative) max. 100 mm, Number of strokes (infinitely variable) 25 - 130 /min, Trimmed Parts are stacked through the Punch Tool, The Skeletal Waste is fed directly into the Grinder, Punching pressure 20 000 daN, Drive capacity 4.16 kW, Servomotor Indexing of sheet, Laser control Technology for v. low tolerances in the difference in the Hole Punch Position, ILLIG RS75 Under the Trim Press Grinder, Motor 8.3 kW, Condition: v.good, Condition: v.good
Age 1990, refurbished in 2003 Consisting of : With auto-start facility Unwind Stand Indramat Servomotor Indexing Max. material width 730 mm Max. Indexing length 300 mm Top & Lower heaters, total connected load top & bottom heaters 74.2 kW Drive Motor 6.93 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Pneumatic Plug Assist, Max. Part height 125 mm Control Cabinet with Optimised Schleicher (PLC) Controls Auto Lubrication Pump Inline ILLIG UG70b Counter/ Stacker, with delivery conveyor Inline Grinder with Blower EXW our Warehouse Enger, Germany, max. mateerial width: 730 mm, max. Form Area: 680 x 280 mm, Infeed length: 300 mm, max. draw: 125 mm
Age 1988:- Technical data ILLIG STAL 80 The ILLIG STAL80 can work Inline with any Thermoformer, or it can be used Off-Line as a stand-alone Trim Press. In Stock at our Warehouse in Enger, Germany, Punching table area max: 1000 x 510 mm, Material width max: 800 mm, Infeed length: 20 – 400 mm, Stroke height: 200 mm, Mold height: 272 mm, Punching pressure: 20 000 daN, Drive capacity: 4.16 kW, Total length: 3950 mm, Total width: 2385 mm, Weight approx: 3600 Kg
Age 2000, Lower Form Table upgraded recently by Gabler to be able to run PET products, original closing force was 75kN, upgraded to 115kN. i.e. the Thermoformer can now work with PET, PP, PS, HIPS etc., Hours run only 37,500 hrs!, Preheater ILLIG VHW 72, 2-Roll Preheater for PP, Gabler SWING Thermoformer:, Max. sheet width 480 mm, Double Heating Oven, Max. Form Area 450 x 220 mm, Max. depth of draw 125 mm, Stacker / Counter, Delivery conveyor for Counted Products, Inline Skeletal Waste Material Winder, Max. Dry Cycle speed 44 cycles/ min., Machine is well maintained and in v. good production condition, Inclusive of:, 1 Bosch Sprang 6 cavity Ø75 PP cup tool, age 2000 with Stacker Parts, 1 Marbach 8-cavity Ø95 PP cup tool year 2013 with Stacker Parts, Both Molds very sparingly used and in v. good condition, Film width: 480 mm, Form Area: 450 x 220 mm, draw: 125 mm
2007 年时代，包括 ：-， 西门子 S7 PLC 控制器 Indramat 伺服电机 西门子 SINAMICS 电机驱动 威图控制柜 带温度显示的冷却装置 带卡扣堆叠 刷子堆叠 级联堆叠 计数器/堆垛机生产良好， 该 ILLIG SZS73 与第 3 代 ILLIG RDM70K 系列内联工作，有效工作区域：740 x 340 毫米， 最大部件高度： 150 mm， 成型件堆叠长度： 800 mm
Age 1999, Consisting of:, Unwind Stand, Preheater ILLIG VWH72, Indramat Servomotor Indexing, Print Registering for Preprinted Film, Max. Film width 610 mm, Max. Thickness range 0.18 to 2.5 mm, Hardened Transport Rails, Double Heating, Heating Load 41.0 kW, Heaters move forwards automatically with pneumatic control, Sheet Sag Control, Form Area 550 x 400 mm, Forming & Punching in Mold with integrated Steel Rule Die, Positive Draw 20 mm, Negative Draw 20 to 40 mm, Trimming Force 50kN., Top and Lower Platens Moved by separate Indramat Servomotors, Heavy duty Toggles on both upper & Lower Platen, Stacking/ Counting Station, Waste Material Winder, Inline ILLIG RS75b Grinder with Blower, Suitable for PS, OPS, PP, PE, PVC etc., PLC: Siemens S5, PLC: Siemens S5, Max Film width: 610 mm, Form Area: 550 x 400 mm
Kiefel Speedformer KMD78 BFS Thermoformer with in-mold trimming using steel rule Knives., Age 2012, Suitable for PS, OPS, EPS, PP, PE, PVC, APET or CPET., Motor Indexing of sheet, Double Heating, Auto Transport Rail spreading for PP, Auto-sheet sag control, Film width max. 810 mm, Max. Form Area 760 x 540 mm, Max. negative/ positive Forming height 150 mm above and below sheet level, Dry Cycle rate 60 strokes/ min, In Mold trimming using Steel-Rule Knives, BFS Punching force: 650 kN, Machine equipped with: film Indexing, infrared heating (top and bottom), forming and in-mold punching unit, Inline SPEED STACKER Counter/ Stacker, residual film rewind, outfeed conveyor, manual removal, Siemens SINAMICS controls and touch panel HMI.
POLYTYPE BDM 482/ 920 upto 8-Colors, only 6-Color-Heads mounted, Cup Printing Line, age 2014 Consisting of:-, Inclined Conveyor Feeder (acts also as an Accumulator), Servo Motor Universal screw Denester, ARCOTEC CG30-2 Corona Pretreatment System with Leak Tester, 8-mandrel Indexing Turret, with Mandrel Holders for Cups, UV-Top (Leutkirch, Germany) VARIUS Powerjet BIF 1/ 815, 8 kW, UV Curing-On-Mandrel, 6 x individually hinged dry-offset Print Heads. (2 Extra Print Heads can be retrofitted), Each Print Head consisting of Print cylinder, radial and axial Print adjustment with micro-register during operation of the Printer, 2 x Form Rubber Rollers dia. 71 and 100 mm, 2 x Oscillating rollers, 2 x Idler Rollers, 1 x Ink Transfer roller (Ductor Roller), 1 x Ink Fountain with Ink Stirer., Ink Washing System on Print Heads, Positive Blow-off, final dual Timing Belt take-off Conveyor to counter S ...
Age 1989 Consisting of: Indramat Servomotor Indexing With auto-start facility SEW Eurodrive Servomotor Indexing Max. material width 730 mm Max. Indexing length 300 mm Top & Lower heaters, total connected load top & bottom heaters 74.2 kW Drive Motor 6.93 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Hydraulic Plug Assist, Max. Part height 125 mm Bosch-Rexroth Hydraulic Power Pack Control Cabinet with Optimised Schleicher (PLC) Controls Encoder on Main Shaft Auto Lubrication Pump Inline ILLIG UG70b Counter/ Stacker, On Sale on a Special Price!, Film width: 700 mm, Form Area: 680 x 280 mm, Infeed length: 300 mm, max. draw: 125 mm
