生产厂家:
(品类: 307)
截面宽度：： 100 mm横截面高度：： 40 mm切割长度：： 2 - 999，999.9 mm条件： 新，规格： 冲击刀切割机 CC-600/40 用于软管和型材- 接触长度：600 mm- 产品直径：40 mm- 带宽：100 mm- 牵引力：400 N 至 800 N- 驱动：2 驱动上下皮带- 传送带速度：100米/分钟- 驱动进给，切割电机：伺服驱动器- 带刀片的切割功率 最大：4，000 1/分钟- 连接负载：3.5 kW- 尺寸长/高/宽：1，900 x 1，650 x 960毫米- 重量约为：580公斤数据量，本广告是用ModulMWS创建的 - LogoTech oHG的机器管理
roll diameter: 400 mmroll length: 1000 mmrolls drilled: Kernbohrung Nip adjustment: hydraulisch 0total power requirement: 45 kWCondition: used, overhauledSpecification: Rolling mill 400 x 1000 mm - second-hand monobloc model, motor under the rolls- roll diameter: 400 mm- roll length: 1000 mm- rolls: with core bore, with central chamber for water cooling- Rollers mounted on bronze bushes with oil circulation lubrication via pump,- equipped with new slewing rings for connection to the water circuit- Gap adjustment: hydraulic, NEW- Hydraulic unit NEW- Tiltable guide plates- stainless steel roller container to hold the mixture- bi-directional rods- safety brake for NOT stop- AC motor: 45 kW - 400 Volt - 50 Hz- Painting: in RAL colours according to customer ...
roll diameter: 560 mmroll length: 1500 mmrolls drilled: Peripher Nip adjustment: hyraulisch 0total power requirement: 150 kWCondition: used, completely overhauled, with warrantySpecification: rolling mill 560 x 1500 mm - used model external gearbox - motor sideways placed at the machine- roll diameter: 560 mm- roll length: 1500 mm- model: Duplocom / pluridrive- Peripherally drilled rollers for water cooling- Cardan joints between gearbox and rollers- Individual drive for the rollers, for variable friction- hydr. gap adjustment- Hydraulic unit- Tilting steel guide plates- rollers mounted on roller bearings with appropriate lubrication- rollers with new ball bearing slewing rings, make Maier, for the connection to the water circuit- One gearbox- two individual drives, each with: 2x 75 kW - 400 V - 50 ...
roll diameter: 550 mmroll length: 1500 mmrolls drilled: Kernbohrung Nip adjustment: hydraulisch 0total power requirement: 90 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
screw ø:: 120 mmscrew length:: 17D screw speedl:: 42 U/mindrive power:: 138 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 350 mmroll length: 700 mmrolls drilled: peripher Nip adjustment: hydraulisch 0total power requirement: 2x 15 kWCondition: new, with CE mark,Specification: Two Roll Mill 350 x 700 mm - new- cylinder diameter: 350 mm- cylinder length: 700 mm- cylinder boring: peripherally drilled- cylinder bearings: with grease lubrication- 2 cylindera chromed- nip admustment: hydraulically- new hydraulic unit- tipper guiding plates of nylon-polyethylen-material- stainless steel tray- bi-directional bars- AC brake motors: 2 pcs, each 15 kW, 400 V, 50 Hz- bevel gearboxes of transmission: 2 pcs- painting: with RAL colours acc. to customer’s specification- complete machine protection with stainless steel carters- new electric cabinet- new electrical system- new machine on-board system- new control panel Touchpanel 7- PLC system: 1 piece, brand S ...
chamber volume: 80 literuseable volume: -- literfriction: -- motor drive power: 390 kWCondition: used - overhauled - with warrantySpecification: Internal mixer used- Capacity: about 80 lts- Rotors model: tangential type with 3 wings- Command gearbox: semi-unidrive type- Max speed rotors: about 60 rpm- Closing system: drop-door type- Hydraulic unit for drop-door system- Pneumatic hopper for loading material- DC engine: 390 kW - 1500 rpm - 440 V- New electric cabinet with driving system for variable speed of rotors- N.1 new electric panel- New on board electric system on the machine- Safety devices in according to standard rules- Manual of use and maintenance in English language and CE marking- Reconditioned and guaranteed machine in according to standard rules- Warranty: 1 yearThe data for this ad was created with ModulMWS - the software solution ...
cross-section width:: -- mmcross-section heigth:: -- mmfeed:: -- mmspeed of feed:: 0,4 - 20 m/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cross-section width:: 85 mmcross-section heigth:: 25 - 40 mmfeed:: 1 - 999,999,9 mmspeed of feed:: 60 m/mincuts max.:: 100 - 120 Schnitte/mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
螺杆 ø：： 用于挤出机 90 mm螺杆长度：： -- 螺杆速度：： -- rpm驱动功率：： 13.6 kW条件： 很少使用，作为新规格： 齿轮泵 ZP 75/50 用于挤出机尺寸 90- SEW 正齿轮： R 97- 西门子直流电机： 1 GG5 118- 驱动功率： 13.6 kW， 57 A- 弧齿联轴器- 带用于头部连接的夹具，- 用于挤出机和头部连接的夹紧法兰，- 带直线导轨的底板，- 齿轴直径：75 mm- 齿宽：50 mm- 螺旋齿，硬化钢轴承，右驱动 - 无需控制此广告是使用ModulMWS创建的 - LogoTech oHG的机器管理
roll diameter: 400 mmroll length: 1100 mmrolls drilled: Kernbohrung Nip adjustment: hydraulisch total power requirement: 2x 30 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cross-section width:: 5 Schläuche 3-5 mmcross-section heigth:: 3 - 20 mmfeed:: 1,5 - 50 mmCondition: used, very good condition only approx. 1 year in productionSpecification: circular knife cutting machine for slices and rings- small cutting machine with high-speed rotating circular knife- feed and knife movement, pneumatic- Tube or strand diameter min.: 3 mm- Tube or strand diameter min.: 20 mm- Feed (ring or strand length): 1.5 - 50 mm- Output depending on material max.: 60 strokes/min- Optionally, the following can be cut 5 tubes or strands: diameter 3 mm to 5 mm 4 tubes or strands: diameter 5 mm to 7 mm 3 hoses or strands: diameter 7 mm to 12 mm 2 hoses or strands: diameter 12 mm to 15 mm 1 hose or string: diameter 15 mm to 20 mm- Power requir ...
锁模力：450 kN注射量：135 cm³蠕变直径：35 mm板尺寸：600 x 400 mm条件：二手，规格：用于TPE的C型框架注塑机 - 使用的夹紧装置：- 锁模力：450 kN- 加热板尺寸：600 x 400 mm- 滑动工作台：是- 关闭方向：从下面- 顶出器/升降器：向上 + Lo注射单元：- 最大注射量：135 cm³- 螺杆直径：35 mm- 连接值：3x 400 V，50 Hz- 重量约：5，500 kg此广告的数据 fü，此广告是使用ModulMWS创建的 - LogoTech oHG的机器管理
Press force max.:: 1.000 kNheating plates:: 500 x 500 mmelectrically heated:: °Cheating power:: kWpiston stroke:: ca. 500 mmno. of stages:: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: 200 °CTorque: - 0Dimensions (HxWxD): 680 x 1320 x 760 mmweight: 177 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 400 mmroll length: 1000 mmrolls drilled: peripher Nip adjustment: hydraulisch total power requirement: 2x 30 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
可用特罗斯特三层挤出机 顶部机器 QSM 90x 16D 中置机 200W x 6D 机器下方 QSM 150 x 16D 扬程 MW500 描述附上
Key data: 70
单螺杆橡胶挤出机，带进料辊和脱气螺杆，螺杆长度 22.D - 带两道温控胶螺钉 - 脱气缸，带静态和/或真空脱气装置 - 真空块泵 - 两个水温控制单元，每个加热能力为9kW， - 带西门子 KTP1200 人机界面控制面板的西门子 PLC S7 机器 - 用于橡胶坯带的直接驱动进料辊进料器，漏斗材料加 筋入口系统，具有 带材监控 - 用于工具拾取等的温度控制基本主
轮胎试验机 - 用于乘客轮胎的静态平衡器。 在工作状态！ 轮胎尺寸从15英寸到20英寸 经 CE 认证 布局可用 - 将根据要求发送！ 更多细节见附件说明
在您的请求中引用代码 1191 更多信息请访问我们的网页 G3 Mixing Technologies - G3 STOCK 或 LinkedIn G3 STOCK 二手机器，可以按原样”购买，无保修，或完全重建 保证为新机器。
在您的请求中引用代码 1190 更多信息请访问我们的网页 G3 Mixing Technologies - G3 STOCK 或 LinkedIn G3 STOCK 二手机器，可以按原样”购买，无保修，或完全重建 保证为新机器。
在您的请求中引用代码 1188 更多信息请访问我们的网页 G3 Mixing Technologies - G3 STOCK 或 LinkedIn G3 STOCK 二手机器，可以按原样”购买，无保修，或完全重建 保证为新机器。
请在您的请求中引用代码 1187 更多信息请访问我们的网页 G3 Mixing Technologies - G3 STOCK 或 LinkedIn G3 STOCK 二手机器，可以按原样”购买，无保修，或完全重建 保证为新机器。
请在您的请求中引用代码 1186 更多信息请访问我们的网页 G3 Mixing Technologies - G3 STOCK 或 LinkedIn G3 STOCK 二手机器，可以按原样”购买，无保修，或完全重建 保证为新机器。
