生产厂家:
(品类: 307)
Press force max.:: 1.000 kNheating plates:: 480 x 520 mmelectrically heated:: 210 - 220 °Cpiston stroke:: ca. 400 mmno. of stages:: 1 Condition: Used, reconditionedSpecification: 4-column vulcanising press 480 x 520 mm, used- Clamping force: 100 t- Closing action: bottom-up- Heating plates: 2 electric plates- Two new heating elements- Plate heating temperature: up to approx. 210–220 °C- Heating plate dimensions: 480 x 520 mm- Distance between heating plates approx.: 400 mm (to be determined during refurbishment)- Working height of lower plate: approx. 1,100 mm- AC motor: 5.5 kW (to be determined during refurbishment)- New solenoid valves- New control cabinet with Siemens 7 touch panel Type KTP700 Basic- Siemens S7-1200 PLC system- Schneider frequency converter- One remote mainte ...
chamber volume: - literuseable volume: 1,6 literfriction: - motor drive power: 18,5 kWCondition: used - refurbishedSpecification: laboratory internal mixer - used- Chamber volume: approx. 1.6 l- Closing system: front door with pneumatic piston- Piston: pneumatic- Rotor geometry: tangential type- Oil-free self-lubricating sealing rings- New rotary union for water cooling- New main gearbox- New AC motor: 18.5 kW- Control cabinet: NEW, with Siemens S7-1200 PLC- Control panel with Siemens KTP 700 Basic touch panel- Cabling: NEW- New Siemens G120 frequency converter for variable speed- New remote maintenance device- Paint finish: according to customer specifications- With safety devices in accordance with applicable standards- Refurbished, with 12-month warranty, CE marking, operating and maintenance instructions in English or GermanT ...
roll diameter: 250 mmroll length: 600 mmrolls drilled: -- nip adjustment: -- drive power:: 46 kWCondition: usedSpecification: 3-roll I-calender 250x600 - used- Collin 3-roll I-calender 250x600Application: Smoothing/finishing of film materials up to 2 mm thick.Machine configuration: with unwinder upstream and rewinder downstream.- Upper and lower rollers adjustable for gap adjustment.- Roller diameter: 252 mm- Roller length: 600 mm (normally 500 mm)- Rollers 2, 3: temperature-controlled up to 320 °C- Heating power: 9 kW / roller- Speed: infinitely variable- Roller speed: +/- 8.6 rpm- Roll adjustment: 0 - 2 mm- Hydraulic unit: 2.2 kW- Oil cooler: 0.25 kW- Servo motor rated power: 1.4 kW / roll drive- Unwinding unit: 0.24 kW- Rewinder: 0.24 kW- Space requirement ...
roll diameter: 650 mmroll length: 2100 mmrolls drilled: Peripher gebohrt Nip adjustment: hyraulisch total power requirement: 160 kWCondition: used, completely overhauled, with warrantySpecification: Meccaniche Moderne rolling mill 650 x 2100 mm - used Model Monoblock – motor under the rolls- Roll diameter: 650 mm- Roll length: 2100 mm- Peripherally drilled rolls for water cooling- Hydraulic gap adjustment: new- Hydraulic unit: new- Tiltable guide plates- Rolls mounted on bronze bearing bushes with corresponding lubrication system- NEW hydraulic unit with DropSa distributors for lubrication of the bronze bushings- Rolls with new ball joints, manufactured by Johnson-Fluiten, for connection to the water circuit- New AC motor: power 160 kW - 400V - 50 Hz - 2x NEW safety brakes for drive motor for ...
roll diameter: 650 mmroll length: 2100 mmrolls drilled: Peripher gebohrt Nip adjustment: hyraulisch total power requirement: 2x 132 kWCondition: used, completely overhauled, with warrantySpecification: Pluridrive rolling mill 650 x 2100 mm - used External gearbox model - motor placed on the side of the machine- Roll diameter: 650 mm- Roll length: 2100 mm- Peripherally drilled rolls for water cooling- 2 new AC motors: Power 2x 132 kW - 400V, 50 Hz- Cardan joints between gearbox and rolls- New drive gearbox- Hydraulic gap adjustment: new- Hydraulic unit: new- Tiltable guide plates- Rolls mounted on bronze bearing bushes with corresponding lubrication system- NEW hydraulic unit with DropSa distributors for lubrication of the bronze bushes- Rolls with new ball joints, manufactured by Johnson-Fluiten, for conn ...
chamber volume: 4 und 5 literuseable volume: -- literfriction: - motor drive power: 2x 37,5 kWCondition: used or reconditionedSpecification: 2x laboratory internal mixer – usedConsisting of two mixing chambers: Type: GK4N- Capacity: approx. 4 litres- Rotor geometry: tangential type- Ram: pneumatic- 1 independent DC motor: 37.5 kW Type: GK5E- Capacity: approx. 5 litres- Rotor geometry: Interlocking rotors type- Ram: Hydraulic- 1 independent DC motor: 37.5 kW The system can be sold in its current condition. Currently not functional due tosevered cables, or refurbished with newelectrical parts, with CE certification and warranty.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
螺丝 ø：： 60 mm 螺丝长度：： 15D 螺丝速度：： -- U/min 状况：使用规格：橡胶挤出机 – 使用过 - 螺丝直径：60 mm- 螺丝长度约15D- 销售如实。买方需对安全法规负责。没有CE认证。该 告的数据是用ModulMWS——LogoTech oHG的软件解决方案——创建的
screw ø:: 90 mmscrew length:: 16D screw speedl:: ca. 40 U/mindrive power:: 48,5 kWCondition: used, overhauled to order, including warranty, including CE markingSpecification: extruder – used with feed roller- Screw diameter: 90 mm- Screw length: L = 12D- Screw speed approx.: 40 rpm- Motor rated power: 48.5 kW- Belt drive, number of belts: 5- Number of heating/cooling zones: 4- Voltage: 3x 380V, 50Hz, NFor further details, please refer to the attachment.Price on request, depending on design and customer requirementsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 700 mmroll length: 1800 mmrolls drilled: Kernbohrung nip adjustment: motorisch drive power:: -- kWCondition: usedSpecification: 4-roll L-calender 700x1800 - used- BUZULUK 4-roll L-calender 700x1800 Type: 04706/P1- Reverse L-shaped roller arrangement- The system was used for the production of PVC films- Film thickness: 0.05 - 1 mm- Can also be used for rubber- Maximum product width: 1,600 mm- Working speed: 6 - 60 m/min- System features roll bending and cross axis- BUZULUK temperature control and stretching device behind the calender- Year of manufacture: 1996- Consists of 13 stretching and pulling rollers behind the last roller of the calender- The device is supplemented by 4 polishing rolls,- these 4 polishing rolls are temperature-controlled,- all rolls are driven via cardan joints,- all rolls can be temperature-control ...
screw ø:: 30 mmscrew length:: 16D screw speedl:: -- U/minCondition: used,Specification: Extruder - used- screw diameter: 30 mm- screw length: L = 16 D- with feed roller- Extruder water tempered,- Cylinder and head one tempering zone- Feed section can be cooled or heated- Flow rate adjustable- Screw compression approx.: 1:1.2- Spraying head for hoses and profiles- Various injection moulds are available- Extruder complete incl.: - Motor from Techno Drives, type: MD 321 MA Drive power: 5 kW, 360 V Motor current max.: 19.7 A N/max.: 1,750 rpm - Control cabinet mounted directly next to the extruder - Profile/tube extrusion head with clamp - Temperature control Extruder is mounted on a base plate- Mass pressure measurement and display available- Operating and display elements are installed in the switch ...
machine measurements: B/H/T 925 x 1.750 x 1.500 mmmachine weight: 550 kgpower capacity: -- kWCondition: used, very good conditionSpecification: Pad Printing Machine TPX 501 TFC E sealed Pot System - used only approx. 3 years in useconsisting of:- Pad printing machine with closed ink system cliché size 450 x 220 x 0,7 mm equipped for 4-colour printing Print head with ceramic ring 96 mm incl. machine base (for a description see appendix) - printing capacity max.: 900 - 1.600 prints/hour - Drive TPX: pneumatic - Control: Microprocessor with EPROM - Tampon stroke: electronically infinitely variable programmable - Tampon vertical stroke: max. 160 mm - pad outreach: max. 149 mm - Weight with base: approx. 550 kg - Dimensions W/H/D: 925 x 1,75 ...
chamber volume: - literuseable volume: 1,8 literfriction: - motor drive power: 30 kWCondition: used - refurbishedSpecification: laboratory internal mixer - used- Chamber volume: approx. 1.8 l- Closing system: trap door system- Piston: pneumatic, for filling material- Rotor geometry: interlocking type- Oil seals with pump lubrication- New rotary union for water cooling- New main gearbox- New AC motor: 30 kW- Control cabinet: NEW, with Siemens S7-1200 PLC- Control panel with Siemens KTP 700 Basic touch panel- Cabling: NEW- New Siemens G120 frequency converter for variable speed- New remote maintenance device- Paint finish: according to customer specifications- With safety devices in accordance with applicable standards- Refurbished, with 12-month warranty, CE marking, operating and maintenance instructions in EnglishThe data for this ad was ...
