压力机 二手 出售 (1,642)

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 48500 €: 926.35 €: 60 to: 3.5 mm: 500 mm: 700 mm: 190 mm: 1 - 100 mm: 65 1/min: 4 : 70 mm: 45 mm: 260 mm: 340 mm: 5.5 kW: 1250 mm: 1350 mm: 2400 mm: 3500 kgWelded steel frame construction4-fold ram guidePneumatic clutch-brake combinationProtective enclosure with light barriers and side doorsMechanical overload protectionTwo-hand and foot pedal operationManual stroke adjustmentManual ram adjustmentOperating modes: Adjustment mode Two-hand release Foot release 2-stroke operation via light barriers Continuous operationAutomatic central lubricationEquipment in accordance with CE regulationsOPTIONS:vibrations padsbolster plateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

nominal force:315 tstroke:300 mmno. of strokes:36 /mindistance between columns:540 mmdistance table/ram, max. stroke up, adjustment up:750 mmtable surface area:530 x 630 mmblow die to die:630 tAllowed max. force:500 tram surface:450 x 560 mmspindle diameter:180 mmpower capacity:18,0 kWweight:13,0 tDimensions (WxDxH):2,5 x 2,0 x 4,0 m

pressure:100 tdistance between columns:1060 mmstroke:700 mmdistance table/ram, max. stroke up, adjustment up:1250 mmtable surface area:1000 x 700 mmpressure of drawing cushion in table:40 tstroke of drawing cushion in table:200 mmdie cushion area:Ø 250 mmtable height over floor:950 mmside window:580 x 750 mmram surface:1000 x 700 mmoil volume:700 lpower requirement:47,0 kWweight:13,0 tDimensions (WxDxH):2,2 x 1,8 x 5,0 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 depth stop:mechanical; motoric adjustable ram interlocking:SITEMA

: neu : 2023 : 7295 : ca. 12 Wochen ab Auftrags : Türkei : 22750 €: 436.8 €: 150 to: 1520 mm: 300 mm: hydraulisch : 11 kW: 2630 mm: 1000 mm: 2450 mm: 3270 kg: 610 mm: 1520 mm: 5 mm/s: 9 mm/s: 10 mm: 100 mm: 190 mm2 guidingsbig upper tool holder and table witht-slotsupper and lower pressbrake toolmanometerrapid down move with automtic changeto working speedpiston stops in every position2 hand panel and foot pedalheight adjustable tableuser manual in Germanand Englishaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure:160 tdistance between columns:2050/1900 mmstroke:15 - 170 mmno. of strokes:15 - 40 /mindistance table/ram, max. stroke up, adjustment up:690 mmtable surface area:1600 x 800 mmside window:800 mmram surface:1620 x 700 mmram adjustment:140 mmpower requirement:15,0 kWweight:24,0 tDimensions (WxDxH):3,3 x 2,3 x 5,3 mheight over floor:4,8 mheight beneath floor:0,5 mclutch:pneumatic ram adjustment:motoric ram counterbalance:pneumatic

pressure:500 tstroke:40 - 160 mmno. of strokes:32 / 48 /mindistance between columns:1620 mmdistance table/ram, max. stroke up, adjustment up:660 mmtable surface area:1600 x 1300 mmtable height over floor:750 mmcolumn travel -side:400 x 430 mmram surface:1400 x 1200 mmram adjustment:120 mmpressure of drawing cushion in table:60 tstroke of drawing cushion in table:100 mmdrawing cushion surface in table:1300 x 810 mmmaterial width of feeder:1000 mmmaterial thickness of feeder:- 6,0 mmfeed length:350 mmheight beneath floor:0,3 mpower requirement:44,0 / 66,0 kWweight:56,0 tDimensions (WxDxH):3,55 x 2,55 x 5,1/5,8 mheight beneath floor without drawing cushion:0,3 mheight beneath floor with drawing cushion:1,0 mclutch-/ brake combination:pneumatic; Desch overload protection in ram:mechanical ram counterbalance:pneumatic ram adjustment:motoric drawing cushion in table:pneumatic Mechanical pincer ...

: neu : ca. 4 Monate ab Auftragse : Italien : 43200 €: 825.12 €: 150 to: 500 mm: 800x600 mm: 630 mm: 22 mm/s: 3 mm/s: 4 kW: 1800 mm: 1200 mm: 2400 mm: 4500 kg2 speedsadjustable max. pressuremanometeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure:500 tstroke:40 - 160 mmno. of strokes:32 / 48 /mindistance between columns:1620 mmdistance table/ram, max. stroke up, adjustment up:660 mmtable surface area:1600 x 1300 mmtable height over floor:750 mmcolumn travel -side:400 x 430 mmram surface:1400 x 1200 mmram adjustment:120 mmmaterial width of feeder:1000 mmmaterial thickness of feeder:- 6,0 mmfeed length:350 mmpower requirement:44,0 / 66,0 kWweight:56,0 tDimensions (WxDxH):3,55 x 2,55 x 5,1/5,8 mheight beneath floor:0,3 mpneumatic clutch-brake combination:Desch Mechanical pincers feed:Obru, BVK 3.10.3

: neu : ca. 4 Monate ab Auftragse : Italien : 55200 €: 1043.28 €: 200 to: 500 mm: 1000x600 mm: 640 mm: 21 mm/s: 2 mm/s: 5.5 kW: 1800 mm: 1300 mm: 2500 mm: 6400 kg2 speedsadjustable max. pressuremanometeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure:500 tstroke:40 - 160 mmno. of strokes:32 / 48 /mindistance between columns:1620 mmdistance table/ram, max. stroke up, adjustment up:660 mmtable surface area:1600 x 1300 mmtable height over floor:750 mmcolumn travel -side:400 x 430 mmram surface:1400 x 1200 mmram adjustment:120 mmpressure of drawing cushion in table:60 tstroke of drawing cushion in table:100 mmdrawing cushion surface in table:1300 x 810 mmmaterial width of feeder:1000 mmmaterial thickness of feeder:- 6,0 mmfeed length:350 mmpower requirement:44,0 / 66,0 kWweight:56,0 tDimensions (WxDxH):3,55 x 2,55 x 5,1/5,8 mheight beneath floor without drawing cushion:0,3 mheight beneath floor with drawing cushion:1,0 mpneumatic clutch-brake combination:Desch drawing cushion in table:pneumatic Mechanical pincers feed:Obru, BVK 3.10.3

: neu : ca. 4 Monate ab Auftragse : Italien : 74800 €: 1413.72 €: 100 to: 500 mm: 1000x800 mm: 600 mm: 26 mm/s: 5 mm/s: 4 kW: 1260 mm: 1060 mm: 2400 mm4-pillar guideram guide roundtable and ram with T-slots2 hand operationSiemens PLCmanometerusers manual Light barrier € on RequestSiemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota• Break time in the bottom• time of Decompression• setting pressure of work• Pieces counter• prestop in upstroke and downstroke• setting for movement in manual and in automatic• management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on RequestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure:6,3 tthroat:300 mmstroke:300 mmdistance table/ram, max. stroke up, adjustment up:800 mmtable surface area:450 x 400 mmhole in the table:80 mmtable height over floor:700 mmram surface:50 mmoil volume:90 lpower requirement:5,5 kWweight:1,35 tdimensions (WxDxH):1,8 x 2,0 x 2,7 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 depth stop:mechanical

pressure:040 tstroke:8 - 50 mmno. of strokes:50 - 300 /mindistance between columns:600 mmdistance table/ram, max. stroke up, adjustment up:285 mmtable surface area:590 x 500 mmhole in the table:590 x 40 - 100 mmtable height over floor:860 mmcolumn travel -side:280 mmram surface:590 x 380 mmram adjustment:80 mmmaterial width of feeder:150 mmpower requirement:7,5 kWclutch:pneumatic ram adjustment:motoric pincer feed:mechanical

: neu : ca. 12 Wochen ab Auftrags : Türkei : 63 to: 400 mm: 750x570 mm: 750x615 mm: 630 mm: 300 mm/s: 10-25 mm/s: 7.5 kW: 1710 mm: 1150 mm: 3170 mm: 4900 kgNC control with touchscreen8-fold ram guidetable and ram with T-slots2 hand operationpressure adjustmentstroke adjustmentdie cushioncentral lubrication systemlight guarduser manual in German or Englishaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure:035 tthroat:225 mmstroke:8 - 100 mmno. of strokes:110 /mindistance table/ram, max. stroke up, adjustment up:400 mmtable surface area:580 x 460 mmhole in the table:250 x 150 mmtable height over floor:700 mmtable adjustable:230 mmram surface:355 x 120 mmram adjustment:70 mmpower requirement:2,2 kWweight:1,5 tdimensions (WxDxH):1,0 x 1,5 x 2,05 mclutch:rolling key overload protection in ram:mechanical

pressure:10 tdistance between columns:450 mm:1500 mmtable-size:450 x 400 mmweight of the machine ca.:470 kgdimensions of the machine ca.:1400 x 750 x 1600 mm

Mechanical screw press, without pallet and pallet trolley Auction-ID: A1-48301-5

pressure:40 tthroat:220 mmstroke:8 / 88 mmtable pass:ø- abgesetzt 225/200 mmram head dimension:400 x 250 mmdistance table/ram:228 mmstroke adjustable from - to:30 - 140 mmram adjustment:63 mmthickness of bolster:80 mmno. of strokes:70 Hub/mintotal power requirement:5,5 kWweight of the machine ca.:2600 kgdimensions of the machine ca.:1100 x 1300 x 2300 mmDocuments:vorhanden

pressure:160 tthroat:370 mmstroke:150 mmdistance table/ram, max. stroke up, adjustment up:500 mmtable surface area:1000 x 700 mmhole in the table:100 mmtable height over floor:820 mmram surface:600 x 520 mmspeed down:350 mm/sspeed up:350 mm/sworking speed:12 - 36 mm/soil volume:1100 lpower requirement:27,0 kWweight:16,5 tdimensions (WxDxH):1,8 x 2,7 x 3,95 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 depth stop:motoric adjustable

: neu : ca. 10 Wochen ab Auftrags : Türkei : 86300 €: 1631.07 €: 150 to: 300 mm: 950x650 mm: 1200x750 mm: 550 mm: 100 mm/s: 5,5 mm/s: 165 mm/s: 11 kW: 2200 mm: 2200 mm: 3250 mm: 8200 kg4-pillar guidetable and ram with T-slotsmanual stroke adjustment via cam switchmanual and automatic operationfront light barriersaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure:10 tstroke:400 mmtotal power requirement:1,6 kWweight of the machine ca.:1,1 tdimensions of the machine ca.:1100 x650 x 2050 mmdayligth:500 mmtable-size:400 x 450 mmDocuments:vorhanden

material width:450 mmmaterial thickness:0,5 - 1,0 mmno. of straightening rolls:6 straightening roll diameter:53 mmnumber of draw-in rolls:2 diameter of draw-in rolls:96 mmpower requirement:1,0 kWweight:0,65 tdimensions (WxDxH):1,0 x 1,0 x 1,55 m

pressure:250 tpassage width:1280 mmstroke:bis 500 mmtotal power requirement:47 kWweight of the machine ca.:23 tdimensions of the machine ca.:2200 x 1850 x 4600 mmtable surface area:1250 x 1000 mmdayligth:800 mmdaylight between the side columns:520 x 750 mmtable height above floor:1000 mmDocuments: vorhanden

pressure:100 tthroat:450 mmstroke:170 mmdistance table/ram, max. stroke up, adjustment up:450 mmtable surface area:3220 x 800 mmtable height over floor:850 mmram surface:3220 x 800 mmspeed down:50 mm/sspeed up:150 mm/sworking speed:7 mm/soil volume:600 lpower requirement:20,0 kWweight:16,0 tdimensions (WxDxH):3,7 x 2,5 x 2,6 m

pressure:6,3 tthroat:170/180 mmstroke:310 mmpower capacity:3 kWdayligth:775 mmweight of the machine ca.:1,5 tclamping table:470 x 330 mmtable height over floor:800 mmC-Type1 Station

pressure:160 tthroat:360 mmstroke:500 mmtotal power requirement:17 kWweight of the machine ca.:7,2 tdimensions of the machine ca.:2,0 x 0,95 x 3,70 mtable-size:900 x 630 mmDocuments:vorhanden

pressure:080 tthroat:360 mmstroke:8 - 112 mmno. of strokes:78 /mindistance table/ram, max. stroke up, adjustment up:467 mmtable surface area:900 x 650 mmhole in the table:250 mmtable height over floor:800 mmpassage to the back:330 mmram surface:650 x 400 mmram adjustment:80 mmpower requirement:11,0 kWdimensions (WxDxH):1,2 x 2,2 x 2,9 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 overload protection in ram:mechanisch

pressure:160 tthroat:360 mmstroke:500 mmDocuments:vorhanden

pressure:160 tstroke:160 fix mmno. of strokes:30 - 120 /mindistance between columns:1190 mmdistance table/ram, max. stroke up, adjustment up:735 mmtable surface area:1200 x 1000 mmhole in the table:500 x 300 mmtable height over floor:900 mmside window:600 mmram surface:1000 x 800 mmram adjustment:125 mmmaterial width of feeder:550 mmmaterial thickness of feeder:0 - 6,0 mmfeed length:350 mmmaterial cross-cut:1100 mm²Feed speed:50 m/minpower requirement:45,0 kWweight:25,0 tdimensions (WxDxH):2,3 x 2,1 x 4,7 minfinitely variable drive:PIV overload protection in ram:hydraulic ram adjustment:motoric ram counterbalance:pneumatic pincer feed:mechanisch, RS 350/550 SL 90

pressure:160 tthroat:370 mmstroke:150 mmtotal power requirement:45 kWweight of the machine ca.:22 tdimensions of the machine ca.:2,75 x 1,85 x x 4,80 mrules for accident prevention:Vorhanden work table::1500 x 700 mmDocuments:vorhanden