子类目
(三级类目)
生产厂家:
(品类: 106)
新机
pressure: 400 tdistance between columns: 600 mmstroke: 600 mmtable-size: 3000 x 1500 mmtravel x / y: 2200 x 900 mmworking feed: 7 mm/sectank capacity: 66 lworking pressure: 30-250 bartotal power requirement: 18,5 kWweight of the machine ca.: 25 tdimensions of the machine ca.: 3500 x 3500 x 3700 m2. STANDARD EQUIPMENTFRAME- Welded steel frame- Frame and plates are precision-milled using a CNC milling machine- Chrome-plated cylinder- Worktop with threaded holesHYDRAULICS- Bosch Rexroth hydraulic pump- Hydrapack or Badestons hydraulic directional control valve- Hydraulic block in accordance with EN standards- 1000-liter hydraulic oil tank- Pressure adjustment via pressure transmitter/regulatorELECTRICS- Control cabinet in accordance with EN standards- All cables are labeled and clearly arranged- All electrical components are from SiemensCONTROL PANEL- Stroke control in any position- X, Y, a ...
可以使用较旧的 Promecam 折弯机。压力：100t，弯曲长度：4000mm，喉部：400mm， 程：100mm，安装高度：300mm，重量：约8500kg。可以进 现场检查
pressure: 130 tchamfer lenght: 3550 mmdistance between columns: 3050 mmstroke: 250 mmControl: Cybelec weight of the machine ca.: 11.600 kgdimensions of the machine ca.: 4000x2000x3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
压力：160 重量：3200 毫米控制：CYBELEC CybTouch 15 PS 机器重量约：14.000 公斤机器尺寸约：m此广告的数据是使用 ModulMWS 创建的 - LogoTech oHG 的软件解决方案
出售： BRUDERER BSTA 50USL 高速冲床 带自动带材送料机 BBV 190 500 千牛 |100–1120 平方米 |全自动 |顶级瑞士品质 技术亮点： 标称力： 500 kN 冲程速率：每分钟 100–1120 次 工作时间： 41000 h 主电机：22 kW 控制电压：24V DC 电源连接：400V / 50Hz / 62 kVA 可调行程： 16 / 19 / 25 / 32 / 38 /44 / 51 mm 闭合高度调节： 64 mm 工作尺寸： 最大工具安装宽度： 1100 mm 带材通过宽度：最大 256 毫米 滑枕面积： 980 × 420 mm 工作台面积： 1080 × 650 mm 带材入口高度可调：60–140 mm 最大带材宽度： 120 mm 最大进给间距： 85 mm 最大材料厚度： 4 毫米 进料角度：180 度 机器尺寸（带 BBV 190）： 机器占地面积（长 × 宽 × 高）：2407 × 1278 × 3150 毫米 重量（约）：8,000 kg 设备包括： Feeder BBV 190 – ...
总压力：400 吨 滑枕行程：500 毫米 滑块调节：350 毫米 日光：1250 毫米 工作台表面积：2500 x 1500 毫米 滑块面积：2500 x 1500 毫米 行程数：15 - 30 s.p.m.最大滑枕模具重量：4000 kg 所需功率：70 kW 地板高度约：8000 mm 机器重量约：150
总压力：400 吨 滑枕行程：500 毫米 滑块调节：350 毫米 日光：1250 毫米 工作台面积：2500 x 1500 毫米 滑块面积：2500 x 1500 毫米 工作台上的模垫容量：80 吨 模垫行程：250 毫米 行程数：15 - 30 s.p.m.最大滑枕模具重量：4000 kg 所需功率：70 kW 地板高度约：8000 mm 机器重量约：150
Promecam （Amada） APX 103 CNC 折弯机可用。压力：1000kN，工作宽度：3000mm，立柱距 2550mm，间隙开口：370mm，行程：100mm，立柱深度：400m m，进料速度：70mm/s，弯曲速度：9mm/s，返回速度：85mm /s，驱动功率：10.5kW。机器尺寸 X/Y/Z：约 3500mm/2200mm/2300mm，重量：约 6400kg，控制：Amada作员，工作时间：36261h。压力机仍 运行，因此营业时间不断变化。可用的文档。可以进 行现场检查
压力： - T喉： - mm行程： - mm总功率要求： - kW机器重量 CA.： - T机器尺寸 CA.： - M
压力： 100 吨喉部： - 毫米行程： 8 - 116 毫米总功率要求： 8 kW机器重量 CA.： 7.5 T机器尺寸 CA.： 约 2.5 x 2.5 x 3.5 m编号 0778单柱偏心压力机 1000 kN行程调节 8-116 mm，行程速率 65/min，滑枕调节 80mm，空间要求2.1x 1.7 x 3.1 m，重量约 7500 kg立式可耕动式， 10/20/30工作区域： 工作台 800 x 560驱动： 8 kW
pressure: 100 tstroke: 380 mmtable surface area: Arbeitsbreite 1100 mmpressure: 258 baroil volume: 46 dm³ajustment speed: 7,54 mm/secwork speed: 2,47 mm/secreturn speed: 9,06 mm/sectotal power requirement: 2,2 kWweight of the machine ca.: 970 kgInner diameter of the cylinder [mm]: 220Piston rod diameter [mm]: 90Diameter piston crown [mm]: 120- Movable cylinder (left-right)- Integrated pressure gauge- Pressure regulator- Two-speed hydraulic unit- Working table adjustable in height- Joystick to move the piston up / down- Hand pump for precision workThe 100 ton hydraulic press is equipped with a movable cylinder (left-right) and a height-adjustable work table. Over and beyondit has a pressure regulation, 2 speeds, a joystick anda hand pump for precision pressing.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 20 ttable length: 670 mmtable width: 570 mmtotal power requirement: 8 kWweight of the machine ca.: 4 tdimensions of the machine ca.: 2 x 2 x 3 mNo. 2886Spotting press 200 kNRICE TUS 60 OK 20Stroke approx. 700Drive: 7,5 kWHydraulic controlExtendable table 670 x 570 mm,Swivel-out top plate 670 x 570 mm,Installation height 740 mmClearance between the columns 620 mm,Space requirement L/W/H 1870 x 1620 x 3000 mm,Weight approx. 3.5 to.Asking price: 8.500,-- ex works / EXWAsking price: 12.900,-- EXW warehouse loaded free on suitable truckThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 60 tstroke: 380 mmtable surface area: Arbeitsbreite 750 mmpressure: 259 baroil volume: 38 dm³ajustment speed: 2,87 mm/secwork speed: 9,5 mm/secreturn speed: 12 mm/sectotal power requirement: 2,2 kWweight of the machine ca.: 540 kgInner diameter of the cylinder [mm]: 170Piston rod diameter [mm]: 75Diameter piston crown [mm]: 100- Integrated pressure gauge- Pressure regulator- Hydraulic unit with 2 speeds- Working table adjustable in height- Joystick to move the piston up / downThe 60 ton workshop press has a fixed cylinder and aheight-adjustable work table (motorized). Equipped withPressure regulation, manometer, 2 speeds and a joystick for themove the piston up and down. With this joystick you can use the piston preciselymove, making this hydraulic press perfect for precision jobssuitable.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
压力： 20 吨立柱间距： 220 毫米行程： 50 毫米总功率要求： 0 kW机器重量 CA.： 0.17 T机器尺寸 CA： 0.4 x 0.5 x 1 m
压力： 60 吨立柱间距： 550 毫米行程： 150毫米 总功率要求： 11 kW机器重量 CA.： 5 T机器尺寸CA.： 3 y 3 x 2.5 m编号 4105液压机最大压缩力 600 kN柱塞行程 150 mm重量 约 4500 kg工作台面 500 x 400 mm
pressure: 63 tdistance between columns: 680 mmstroke: 150 mmtotal power requirement: 15 kWweight of the machine ca.: 7 tdimensions of the machine ca.: 3 x 3 x 3 mNo. 0214ydraulic high-speed double-column press SMG DS 63Clearance between the uprights 680 mm,max. distance between table top and ram 385 mm,Ejector force 15kN, largest ram stroke 150 mm.Working area: Table surface 660 x 460Drive: 15 kW pressing force 630 kN, retraction force 51 kNThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 tstroke: 400 mmtable surface area: Arbeitsbreite 1300 mmpressure: 243 baroil volume: 64 dm³ajustment speed: 5,73 mm/secwork speed: 1,84 mm/secreturn speed: 7,08 mm/sectotal power requirement: 3,0 kWweight of the machine ca.: 1690 kgInner diameter of the cylinder [mm]: 320Piston rod diameter [mm]: 140Diameter piston crown [mm]: 175- adjustable cylinder (left-right)- Integrated pressure gauge- Pressure regulator- Two-speed hydraulic unit- Working table adjustable in height- Joystick to move the piston up / down- Hand pump for precision work- with digital displayThis 200 ton hydraulic press is equipped with a movable cylinder (left-right), a height-adjustable work table, a pressure regulator, 2speeds, a joystick and a hand pump for precision pressingfitted.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 30 tstroke: 350 mmtable surface area: Arbeitsbreite 750 x 260 mmpressure: 221 baroil volume: 37 dm³work speed: max. 9,8 mm/secreturn speed: 14 mm/sectotal power requirement: 3 kWweight of the machine ca.: 385 kgInner diameter of the cylinder [mm]: 130Piston rod diameter [mm]: 55Diameter piston head [mm]: 80- Integrated pressure gauge- Pressure regulator- Hydraulic unit with variable speeds- Working table adjustable in height- Joystick to control piston and speedThe workshop press (30T) has a fixed cylinder and a highadjustable work table (motorized). Equipped with pressure regulation,Pressure gauge, variable speed and a joystick to move the piston up and downto move off. With this joystick you can also control the speedadjust, making this motorized hydraulic press perfect forprecision work is suitable.The data for this ad was created with ModulMWS - the software solution of Lo ...
pressure: 40 ttable length: 1280 mmtable width: 900 mmtotal power requirement: 7 kWweight of the machine ca.: 8 tdimensions of the machine ca.: 3 x 2 x 3,6 m mNo. 5282Spotting press 400 kNREIS TUS 90 OK 40Working area: table 900 x 1280Column passage 930 x 705 mmTable top 900 x 1280 mmram plate 900 x 1200 mmInstallation height 1035 mmSpace requirement approx. 3 x 2 x 3.6 mTransport dimensions approx. 4 loading meters, width 2.20 / height 2.80Weight approx. 8 tonsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 6,2 tchamfer lenght: 285 mm mmdistance between columns: 230 mmdayligth: 215 mmthroat: 70 mmstroke: 100 mmworking feed: 9,8 mm/secreturn speed: 50 mm/secquantity of oil: 10 lControl: DELEM DA 41T total power requirement: 0,7 kWweight of the machine ca.: 250 kgdimensions: 900 x 1300 x 550 mm• Basic version as a C-frame• Compact table model• Ideal for prototypes and small series• Very short setup time• Functionally simple• Wide range of applications• Low noise level• Low energy consumption• Easy handlingincluding special equipment:- CNC control DELEM DA 41TThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 150 tTable dimensions: 1000 x 360 mmvoltage: 400 Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mInclineable mechanical press withupdated electrics (CE2004) andbolster plates.The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 2,5 kNstroke: 45 mmthroat: 90 mmWorking height from to: 80 - 220 mmtable surface area: 120 x 60 mmweight of the machine ca.: 22 Kgdimensions: 160 x 230 x 390 mmHand presses with rack HZ 250The power is transmitted via a rack and pinion construction. she findstheir use where during the working process a constant pressureis needed.Precisely manufactured, spindle hardened and ground, unlimited service lifeLong spindle guide, optimal pressure performance,T-slot according to DIN 650 milled in the middle, sliding blocks fit exactly.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 500 kNstroke: 40 mmthroat: 73 mmWorking height from to: 60 - 150 mmtable surface area: 115 x 70 mmweight of the machine ca.: 10 Kg.Toggle lever hand press SPECIAL OFFER!• Working height adjustable by simply loosening the clamping screws on the stand• Working height fine adjustment for HK 800 = adjustment of the press head to the desired working height. The fine adjustment takes place forced in both directions via a threaded spindle• Hand lever arranged in a user-friendly manner, return via springThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: ja weight of the machine ca.: 9,5 tserial number: 10457/2 : 160000 KGstroke of worktool slide: 41 Hub/minPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 tdistance between columns: 650 mmstroke: 200 mmtotal power requirement: 30 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2500 mmplate thickness: 12,5 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mWidth of metal, max. 2,500 mmMetal thickness, max. 12.5 mmWeight, approx. 19,000 kgDrive 40 kWEquipment / Special Features:Adjustment of cutting gap.Hydraulic blank holder.Automatic arrester adjustment for cutting blanks.Program input and piece number input.Transportation device for blanks. Stacking device.This is an ideal machine for cutting lots of small blanks out of large pieces of sheet metal. Machine is equipped with a complex stacking device on the back of the machine. This is a heavy and rigid machine.Condition : Good to very good. Machine can soon be inspected under power.Delivery : Ex stock, as inspected.Payment : Net, after conclusion of contract.Thank you for your interest.The data for this ad w ...
立柱间距离： 300 mm工作台长度： 3550 mm工作台宽度： 190 mm工作台高度： 800 mm立柱间距离： 3230 mm立柱臂： 300 mm机器重量 CA.： 12,5 T机器尺寸 CA： 1600 x 3800 x 2800 m
压力： 500 吨通道宽度： 750 毫米行程： 120 毫米总功率要求： 57 kW机器重量 CA.： 16 T机器尺寸 CA.： M
