live center, live center point, live Morse taper, live center point, live lathe center, center point, centering taper -Manufacturer: Bruckner, live centering tip, centering cone Type: unfortunately without a type designation -Recording: MK5 -Centering tip: Ø 60 mm -Dimensions: Ø 120 x 315 mm -Weight: 9.6 kg
revolving center, revolving center point, revolving Morse taper, revolving center point, revolving lathe center, center point, centering taper -Manufacturer: Bruckner, rotating center point centering cone -Type: unfortunately without type designation -Recording: MK4 -Centering tip: Ø mm -Dimensions: Ø 58 x 203 mm -Weight: 1.6 kg
live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Bruckner, rotating centering point centering cone -Type: unfortunately without type designation -Recording: MK5 -Centering tip: Ø mm -Dimensions: Ø 95 x 295 mm -Weight: 6 kg
live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Bruckner, rotating centering point centering cone 3 pieces -Type: unfortunately without type designation -Recording: MK4 -Dimensions: Ø 60 x 200 mm -Transport dimensions: 200/185/H65 mm -Total weight: 5.7 kg
live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Bruckner, rotating centering point centering cone 3 pieces -Type: unfortunately without type designation -Recording: MK3 -Dimensions: see photos -Transport dimensions: 180/16/H60 mm -Total weight: 3.0 kg
Bruckner stenter frame with 6 fields and a working width from 100 to 240 cm, complete with washing section, padder application, dyeing beam unwinding and moisture monitoring system.Control and drive technology upgraded in 2018 by Bruckner. Manufacturer: Bruckner Working width: 100 cm to 240 cm Configuration: 6 field stenter frame Year of Manufacture : 1988 Extra Features - Dyeing beams unwinding - Finishing application through padder - Pleva moisture pickup monitoring and controlling system Technical Data - Minimum working width: 1000 mm - Maximum working width: 2400 mm - Infeed expansion shafts: 40x40 mm - Infeed dyeing beams diameter: 400, 500, 600 mm, outer diameter up to 1500 mm - Infeed expansion shaft max weight: 250 kg - Infeed dyeing beams max weight: 3500 kg - Outfeed winding shaft length: 2700 mm - Outfeed dyeing beams diameter: 400, 500, 600 mm - Outfeed winding shaft ...
制造商：布鲁克纳 机器类型：支架 制造年份：1991年 工作宽度：2400毫米 进料：来自批量处理 纬线直发器 涂层选项：滚筒上方或织物覆盖卷筒 涂层方法：刀式涂层 干燥机：短进料，适合涂装应用 运输系统：针链，5场 供暖：燃气加热 出口部分：包含挤压垫 冷却：气缸冷却 输出：配备不间断系统的批量卷发机 更多信息请点击这里 - / 联系方式为—
制造商：Brückner 机器类型：夹紧框架 工作宽度：最大2200毫米 滚筒宽度：最大2400毫米 温度区/区段数量：3 卡拉托：2250毫米 更多信息请点击这里 - / 联系方式为—
Latex coating system by Brückner Back Coating Line Technical data: Max. Working width: 5200 mm Back Coating Line can be used up to a clamping width of 5250 mm. Min. working width: 3400 mm for Prage 3500 mm Drive speed: 2 -. 15 m/min. Drive: Direct current motors Operating side: right Colour of the system: RAL 1.015 structure Goods transport system: vertical needle chain Length of one field: 3 m Fans per field: 2 The output of one fan: . Fan power: 7.5 kW Heating systems - per field: 2, separately above and below the web Adjustable air temperature: 50 - 250 .° C Achievable temperature spread: 160 ° at the top, 100 ° at the bottom or top 200 ° , bottom 125 ° Size of the dryer Pre-drying: 5 fields Gelling channel: 3 fields Vulcanising channel: 12 fields Production speed: 9- m/min. with the following data: Precoat: 725 g/m2 dry,- 76. % dry matter Foam: 650 g/m ...
