We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
używany
Prasa hydrauliczna EXNER EXSBR 200 JOM 8/1987 Nr. seryjny 10042 Ciśnienie 200 t Stół 1800 x 800 mm Pobór mocy 65 kW Bezpieczna odległość 195 mm Przesuw 52 mm Czas pracy 120 ms Ciężar ok. 23 t
używany
hydrauliczna prasa czterokolumnowa Exner, typ H4 SP 450, Y.O.M. 1983, ciśnienie 450 do., bok. Przechodzi 475 mm. Wysokość montażu 600 mm, powierzchnia stołu 1100 x 850 mm, obszar uderzenia 300 mm, skok 200 mm. Wymiary 3100mm x 2100 mm, głębokość 1980 mm. Waga 13 do. ]
używany
pressure:150 t distance between columns:300 mm stroke:180 mm distance table/ram, max. stroke up, adjustment up:300 mm table surface area:570x180 / 300x410 mm table height over floor:875 mm side window:180 mm ram surface:180 mm speed down:250 mm/s speed up:160 mm/s working speed:6 - 12 mm/s oil volume:250 l power requirement:11,0 kW weight:2,4 t dimensions (WxDxH):1,3 x 1,3 x 2,4 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 § 20 foundation pit:nicht erforderlich
używany
pressure:40 t distance between columns:495 mm stroke:150 mm distance table/ram, max. stroke up, adjustment up:300 mm table surface area:490 x 400 mm hole in the table:50 mm table height over floor:950 mm side window:155 mm ram surface:150 mm speed down:480 mm/s speed up:480 mm/s working speed:20 mm/s oil volume:115 l power requirement:7,5 kW weight:2,2 t dimensions (WxDxH):1,35 x 1,1 x 2,2 m depth stop:mechanisch foundation pit:nicht erforderlich
używany
pressure:40 t distance between columns:500 mm stroke:150 mm distance table/ram, max. stroke up, adjustment up:300 mm table surface area:480 x 400 mm hole in the table:50 mm table height over floor:950 mm side window:150 mm ram surface:150 mm speed down:480 mm/s speed up:480 mm/s working speed:20 mm/s oil volume:160 l power requirement:7,5 kW weight:2,6 t dimensions (WxDxH):1,1 x 1,4 x 2,4 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard:Sick depth stop:mechanical foundation pit:not necessary
używany
press ram:: ram head width: 2.100 mm depth: 840 mm stroke: 350 mm Control: EXNER Guide way length: 750 mm nominal pressure: 2x 400 kN return capacity: 2x 150 kN ram stroke speed - under load: 100%: ca. 0 - 10 mm/s ram stroke speed: ca. 0 - 20 mm/s T-slot - width: 18 mm T-slot - distance: 150 mm Installation Space:: dayligth: 550 mm table surface area: 1.600 x 840 mm T-slot - width: 18 mm T-slot - distance: 90 mm dist. between pillars (left to right): 1.700 mm dist. between pillars (front to rear): 600 mm table height over floor: 1.300 mm total power requirement: 11 kW weight of the machine ca.: 12 t dimensions of the machine ca.: 2,5 x 2,0 x 3,7 m Hydraulic tool testing press EXNER - PG 80 - very good condition - approx. 300 operating hours - Electronic roller feed device EV 22 AK incl. Bandwidth: max. 220 mm Band cross section: max. 200 mm² Feed length: 0.1 x 19,999 mm Speed: ...
używany
nacisk: 200 t Odległość między kolumnami: - mm skok: - mm powierzchnia stołu: 2000 x 800 mm całkowite zapotrzebowanie mocy: kW waga maszyny ok.: 31 t wymiary maszyny ok.: m Moc napędu 55 / 4 kW Przesuw śledzenia 28 mm Odległość bezpieczeństwa 155 mm Czas śledzenia 97 ms Napełnianie olejem 1200 litrów
używany
pressure: 125 t distance between columns: 1500 / 460 mm stroke: 400 mm total power requirement: 15 kW weight of the machine ca.: 10 t dayligth: 800 mm table surface area: 1900x870 mm ram surface: 1900x870 mm working feed: 0-10 mm/sec return speed: 0-20 mm/sec dimensions: BxTxH 2400x1500x3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
używany
nacisk: 20 t gardło: 185 mm skok: 100 mm powierzchnia stołu: 380 x 350 mm dzień: 250 mm wysokość stołu nad podłogą: 840 mm całkowite zapotrzebowanie mocy: 4 kW masa maszyny ok.: 1,3 t
używany
nacisk: 60 t gardło: 330 mm skok: 500 mm powierzchnia stołu: 640x640 mm powierzchnia tłoka: 120 mm wysokość stołu: 850 mm otwór narzędziowy w tłoku: 50 mm waga maszyny ok.: 7 t
używany
pressure: 200 t passage width: NA mm stroke: 180 mm table length: 690 mm table width: 530 mm distance between columns: 420 mm total power requirement: 18 kW weight of the machine ca.: t dimensions of the machine ca.: m Hydr. 4-Pillar Press for Embossing/Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.