We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
б/у
Спецификации: Грузоподъемность 50 тонн Частота ходов 115 об/мин Вылет 250 мм Ход плунжера 8 - 120 мм Регулировка плунжера прибл. 70 мм Стол, ШxГ прибл. 650 x 500 мм Диарея och ок. 250 x 180 мм
б/у
На продажу выставлен эксцентриковый пресс производителя EBU, тип E50F, построенный в 1978 году Номинальное усилие 50 тонн Регулировка хода 8-120 мм Регулировка плунжера 70 мм Частота ходов 115 Мощность двигателя 3 кВт Машина в хорошем состоянии.
б/у
Key data: 75 t
Спецификации: Грузоподъемность 75 тонн Частота ходов 90 ударов Вылет 300 мм Ход плунжера 16 - 140 мм Регулировка плунжера 80 мм Размер стола прибл. 800 x 600 мм Высота установки макс. ок. 400 мм
б/у
Усилие сжатия: 25 т Проекция: 200 мм Размер стола: 450 х 600 мм Отверстие в столе: 100 x 210 мм Регулировка стола: 240 мм Регулировка плунжера: 70 мм Регулировка хода: 4 - 80 мм Частота вращения: 150 об/мин Приводной двигатель: 380 В, 1,1 кВт Требования к пространству: 1300 x 800 x 2000 мм Вес: ок. 1450 кг
б/у
Усилие сжатия: 25 т Проекция: 200 мм Размер стола: 450 х 600 мм Регулировка стола: 240 мм Регулировка плунжера: 70 мм Регулировка хода: 4 - 80 мм Частота вращения: 150 об/мин Приводной двигатель: 380 В, 1,1 кВт Требуемое пространство: 1600 x 850 x 2000 мм Вес: ок. 1450 кг
б/у
Эксцентриковая пресса Бренд Эбу Тип EP15 Размер стола 400x430mm Максимальное давление 15 000кг Регулировка высоты стола Настольный проход D160мм Регулировка хода 4-70мм Отверстие рамы 40мм Проекция 200мм Максимальное расстояние стола-нарезанки 320mm Одиночный/длительный ход Щит Маховик D600мм 400В 1.0кВт Вес машины около 870 кг Цена покупки нетто. Можно посмотреть и протестировать на нашем складе. Доставка возможна за дополнительную плату. Вся информация без гарантии!
б/у
No 4929: 1 гебр. Эксцентричный пресс 22 - 26 до Фабр, я не хреново. EBU, тип 25, с номером хода 130 мин-1 Арб.-Бер.: Регулировка хода 80 мм,
б/у
Давление: 75 т Расширение: 300 мм Размер таблицы: 620 x 800 мм Диарея в таблице: 225 x 325 мм Настройка таблицы: 175 мм Поверхность пестля: 180 x 475 мм Завершение удара: 80 мм Регулировка хода: 16 - 140 мм Мощность удара: 90 /мин Двигатель привода: 380 В, 3 кВт Потребность в пространстве: 1700 x 1200 x 2500 мм Вес: 3300 кг
б/у
Pressing force: 25t, stroke adjustment: 4-80mm, stroke speed: 130/min, ram adjustment: 70mm, including documentation.
б/у
Capacity: 40 ton Throat depth: 225 mm Ram stroke: 4 - 100 mm Slide adjustment: 85 mm Shut height (stroke down, adjustment up): 375 mm Table surface area : 640 x 450 mm Slide area: 430 x 240 mm Number of strokes: 130 s.p.m. Required power: kW Dimensions L x W x H: 1200 x 1680 x 2160 mm Weight of machine approx.: 3,1 ton
б/у
Description: Pressure normal 25 t Stroke adjustment 4 to 80 mm Ram adjustment 70 mm Stroke rate 130/min Power requirement 1.5 hp Without built-in tool! weight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 1,000 x 1,700 mm
б/у
pressure: 80 t stroke: 8-140 mm no. of strokes: 105 Hub/min ram - range of adjustment: 100 mm table surface area: 900x625 mm ram surface: 600x280 mm hole in the table: Ø 150 mm table height: 1000 mm tool hole in ram: Ø 40 mm : 490 mm weight of the machine ca.: 7 t dimensions of the machine ca.: BxTxH 1800x2200x2600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
б/у
Ширина материала: 320 мм Толщина материала: 8 мм Количество правильных роликов: 9 Поперечная резка материала: 2000 мм² Вес машины ок.: 4,2 т Габариты машины ок.: 2000x2000x2400 мм
б/у
pressure: 100 t throat: 340 mm stroke: 8-140 mm no. of strokes: 50 Hub/min ram - range of adjustment: 110 mm table surface area: 1000x700 mm ram surface: 650x450 mm hole in the table: Ø 180 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 10,5 t dimensions of the machine ca.: BxTxH 2300x1600x3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
б/у
pressure: 40 t throat: 270 mm stroke: 4-100 mm no. of strokes: 130 Hub/min ram - range of adjustment: 80 mm table surface area: 670x540 mm ram surface: 460x300 mm hole in the table: Ø 100 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 6 t dimensions of the machine ca.: BxTxH 1500x2300x3300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
б/у
pressure: 63 t throat: 300 mm stroke: 8-140 mm no. of strokes: 70 Hub/min ram - range of adjustment: 100 mm table surface area: 750x620 mm ram surface: 500x340 mm hole in the table: Ø 180 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 7,5 t dimensions of the machine ca.: BxTxH 2100x1500x3300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
б/у
давление: 25 т горло: 200 мм ход: 4 - 80 мм Площадь поверхности стола: 595 x 410 мм Регулировка плунжера: 70 мм Количество ходов: 150 Ступица/мин Регулируемый по высоте стол: 240 мм Общая потребляемая мощность: 1,1 кВт Вес машины ок.: 1,45 т Размеры машины Д x Ш x В: 1,30 x 0,80 x 2,0 м
б/у
pressure: 75 t throat: 300 mm stroke: 16-140 mm no. of strokes: 105 Hub/min ram - range of adjustment: 80 mm table surface area: 800x600 mm ram surface: 650x260 mm hole in the table: Ø180 mm table height: 920 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 4,5 t dimensions of the machine ca.: BxTxH 1500x2500x2500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
б/у
pressure: 50 t throat: 250 mm stroke: 8-120 mm no. of strokes: 115 Hub/min ram - range of adjustment: 70 mm table surface area: 650x510 mm ram surface: 400x180 mm hole in the table: Ø 180 mm table height: 850 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 4 t dimensions of the machine ca.: BxTxH 1500x2500x2500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
б/у
pressure: 80 t throat: 300 mm stroke: 6 - 140 mm ram adjustment: 100 mm no. of strokes: 60 Hub/min table surface area: 900 x 620 mm ram surface: 600 x 280 mm total power requirement: 14 A weight of the machine ca.: 7,6 t dimensions of the machine ca.: BxTxH 1,38 x 2,1 x 2,56 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
б/у
pressure: 80 t throat: 320 mm stroke: 8-140 mm no. of strokes: 30-120 Hub/min ram - range of adjustment: 100 mm table surface area: 900x620 mm ram surface: 600x320 mm hole in the table: 315x180 mm table height: 870 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 7,3 t dimensions of the machine ca.: BxTxH 1500x2000x2750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
б/у
pressure: 75 t throat: 305 mm stroke: 16-140 mm no. of strokes: 80/105 Hub/min ram - range of adjustment: 80 mm table surface - upper: 800x600 mm ram surface: 470x180 mm hole in the table: Ø 150 mm table height: 870 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 5 t dimensions of the machine ca.: BxTxH 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
б/у
ширина листа - макс.: 320 мм Вес катушки: 2,5 т внутренний диаметр катушки: 380-630 мм
б/у
б/у
pressure: 130 t throat: 450 mm stroke: 20-200 mm no. of strokes: 60/80 Hub/min ram - range of adjustment: 110 mm table surface area: 1000x880 mm ram surface: 900x450 mm hole in the table: 400x200 mm table height: 850 mm tool hole in ram: Ø 50 mm total power requirement: 15 kW weight of the machine ca.: 13,5 t dimensions of the machine ca.: BxTxH 1600x2700x3400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
б/у
Вместимость: 16 тДля стола: 0 ммШирина стола: 0 ммИнсультат: 70 мм Make EBU 16 T Тип H 16 1992 год Эксцентриковый пресс с воздушной муфтой Усилие = 160 кН Регулировка хода 4 - 70 мм Рама адъютант = 80 мм Ход поршня%27s 160 /мин Воздушная муфта Движущийся стол Отдельный электрический шкаф
б/у
: ja вес машины ca.: 9,5 t
б/у
pressure: 100 t throat: 325 mm stroke: 10-110 mm no. of strokes: 100 Hub/min ram - range of adjustment: 80 mm table surface area: 900x630 mm ram surface: 500x315 mm hole in the table: 325x225 mm table height: 800 mm tool hole in ram: Ø 50 mm dimensions: BxTxH mm weight of the machine ca.: 8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
б/у
pressure: 75 t throat: 310 mm stroke: 16-140 mm no. of strokes: 105 Hub/min ram - range of adjustment: 80 mm table surface area: 800x610 mm ram surface: 600x175 mm hole in the table: Ø 170 mm table height: 820 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 4 t dimensions of the machine ca.: 1500x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
б/у
pressure: 63 t throat: 275 mm stroke: 8-120 mm no. of strokes: 30-120 Hub/min ram - range of adjustment: 85 mm hole in the table: 220x100 mm table surface area: 750x540 mm ram surface: 400x260 mm table height: 820 mm tool hole in ram: Ø 50 mm total power requirement: 7,7 kW weight of the machine ca.: 5 t dimensions of the machine ca.: BxTxH 1500x2000x2450 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.