Technical data Manufacturer: HUVEMA Type: HU 225 P Serial Number: 14325-1173 Year of construction / Date: 06/2020 Power: 0.75 kW Voltage: 400 V / 50 Hz Weight: 28 kg Configuration Double-sided polishing machine with tool holders, protective cover, emergency stop switch and 400 V connection. Mounted on work table. With visible sanding and polishing accessories, including several lamella grinding wheels. Remarks The machine comes from a company closure and was actively used in production until the plant closed. Auction-ID: A7-49302-128
Technical data Manufacturer: WEILER Type: UD 24 CNC Control: Siemens SINUMERIK RÖHM chuck, max. operating pressure 50 bar Configuration CNC Lathe Tool turret RÖHM Chuck Closed workspace Remarks The article comes from a company liquidation and was actively used in the training workshop until the company closed. Auction-ID: A7-49302-142
Technical data Manufacturer: DECKEL MAHO GmbH Type: FP1 Active Serial number: 2102-3698 Year of Make: 1989 Speed range: 40–2,000 rpm, 16 steps Tool holder: SK40 (Source: online research) Feed: 5–500 mm/min, infinitely variable (Source: Online research) Rapid traverse: 1,200 mm/min (Source: Online research) Drive power: 1.5 / 1.9 kW, factory data FP1 active (source: online research) Voltage: 380 V Dimensions: approx. 1,100 x 900 x 1,550 mm (Source: Online Research) Weight: approx. 700 kg Configuration 3-axis Heidenhain digital display, separate control cabinet, horizontal milling holder, swivelling work table, coolant system and machine light. (Source: Online research) Remarks The article comes from a company liquidation and was actively used in the training workshop until the company closed. Note No technical documentation available. information researched to the best of my know ...
Technical data Manufacturer: WEILER Machine Tools Model No.: Intern 140 Machine No.: 85140112 Operating voltage: 380 V Control voltage: 220 V Connected load: 2.2 kW Tip height: 140 mm (Source: Online research) Circulating Ø over bed: 280 mm (Source: online research) Circulating Ø over face slide: 158 mm (Source: Online research) Center width: 650 mm (Source: Online research) Speed range: 96–2,500 rpm, 8 steps (source: online research) Longitudinal feed: 0.02–0.63 mm/rev (source: online research) Tailstock mount: MK 3 (Source: Online research) Quill stroke: 85 mm (Source: Online research) Weight: approx. 660 kg (Source: Online research) Configuration HEIDENHAIN digital display, 3-jaw chuck, Multifix tool holder, tailstock, coolant device and machine base with storage space. Note No technical documentation available. information researched to the best of my knowledge and belief. No ...
Technical data Manufacturer: Friedrich Deckel Aktiengesellschaft Type: FP4M Machine No.: 2203-8891 Control: HEIDENHAIN TNC 123 Operating voltage: 400 V, 3-phase Travel X/Y/Z: up to 500 / 400 / 400 mm (Source: Online research) Spindle speed: 18 steps, 50–2,500 min⁻¹ (Source: Online research) Tool holder: SK 40, M16 (Source: online research) Quill stroke: 90 mm (Source: online research) Feed rate: 8–630 mm/min (Source: Online research) Rapid traverse: 1,300 mm/min (Source: Online research) Clamping table: 800 x 460 mm, 7 T-slots (source: online research) Max. table load: approx. 400 kg (source: online research) Machine weight: approx. 1,450 kg (Source: Online research) Configuration Universal tool milling machine with HEIDENHAIN TNC 123, active/positioning function in X, Y, and Z, T-slot clamping table, coolant device, mobile control panel, and DECKEL supports. Note No technical d ...
Technical data Manufacturer: Friedrich Deckel Aktiengesellschaft Type: FP1 Active (Source: Online Research) Year of adaptation control: 1989 Serial Number Adjustment Control: 25955 Operating voltage: 3~380V, 50/60Hz Rated current: 11 A Control voltage: 24 V DC Control/display: HEIDENHAIN TNC 113, 3 axes X/Y/Z (Source: Online research) Spindle speed: 40–2,000 min⁻¹ (Source: online research) Tool holder: SK40 (Source: online research) Configuration Active digital display with positioning function (Source: Online research) Swivelling vertical milling head T-slot work table Separate adjustment control / control cabinet Machine Light Note No technical documentation available. information researched to the best of my knowledge and belief. No guarantee is given for completeness and correctness. The article comes from a company liquidation and was actively used in the training workshop un ...
Technical data Manufacturer: Fabryka Obrabiarek Precyzyjnych AVIA Type: FNF-40P Serial Number: 50691 Year of Make: 1998 Weight: 1,650 kg Spindle speed: 63–3,150 min⁻¹ Display: HEIDENHAIN 3-axis digital display Configuration Universal tool milling machine with vertical milling head, T-slot clamping table, manual handwheels and separate control panel. CE marking available. Remarks The article comes from a company liquidation and was actively used in production until the plant closed. Auction-ID: A7-49302-148
Technical data Manufacturer: CASTEK HUBER Machine Type: Start Hole EDM Machine / EDM Drilling Machine (Source: Online Research) Type / Model: not clearly readable Configuration Vertical EDM head Movable cross table with handwheels Electronic EDM/Positioning Control Pump and flushing unit Work light Machine cabinet Remarks The article comes from a company liquidation and was actively used in production until the plant closed. Auction-ID: A7-49302-149
Technical data Manufacturer: Neuson Machine Type: Skid Steer Loader / Skid Steer Loader Configuration Front bucket Protective cabin with side guards Two joystick controls Front Work Lights Remarks The machine comes from a well-maintained company liquidation and was actively used in ongoing production until the end. Auction-ID: A7-49302-152
Technical data Manufacturer: Sampierana S.p.A. Brand: Eurocomach Type: ESK 150.4 Identification number: 15B200 Engine power: 44.7 kW Permissible total weight: 4,500 kg Permissible axle load 1st axle: 2,900 kg Permissible axle load 2nd axle: 2,550 kg Configuration Skid steer loader with hydraulic lifting arms Loading bucket with teeth Separate fork carriage with pallet forks Protective cabin with mesh elements Joystick operation Solid rubber tyres with perforated tread Auction-ID: A7-49302-155
Technical data Manufacturer: Mazak / Yamazaki Mazak Corp. Type: Super Quick Turn Model No.: 16MS-Y Nameplate: SQT-16 MSY Machine Type: CNC Lathe / CNC Turning Center Chuck Manufacturer: Kitagawa Chuck Model: B-216 Max. pressure chuck: 410 PSI / 29 kgf/cm² Max. speed chuck: 5,000 RPM Configuration With tool turret, chuck, protective grille and visible auxiliary units. Remarks The machine comes from a well-maintained company liquidation and was actively used in ongoing production until the end. Auction-ID: A7-49302-157
Technical data Manufacturer: BEHRINGER Type: HBP 260 A Year of Make: 1989 Configuration Horizontal metal band sawing machine with material feed via rollers. Hydraulic workpiece clamping and feed device. Control panel with push buttons, selector switches, emergency stop and main switch. Pressure gauge for pressure display. Protective hoods on both sides of the sawing area. BEHRINGER operating instructions available. Remarks The machine comes from a well-maintained company liquidation and was actively used in ongoing production until the end. Auction-ID: A7-49302-159
Technical data Manufacturer: GILLARDON Model: GT 16 Configuration Column drill with height-adjustable work table and T-slots. Manual quill delivery. Drilling depth scale available. Speed adjustment available; Machine note: Speeds can only be adjusted while running. Tool holder / drill chuck mounted. Remarks The machine comes from a well-maintained company liquidation and was actively used in ongoing production until the end. Auction-ID: A7-49302-160
Technical data Manufacturer: Gebr. Mägerle A.G., Uster / Switzerland Type: F 10 Configuration Conventional surface grinding machine with a long movable work table. Magnetic clamping plate available. Vertically adjustable grinding head. Manual handwheels and controls for the axis movements. Separate control unit with emergency stop. Hydraulic equipment available; Controls for hydraulic pump and fan motor. Remarks The machine comes from a well-maintained company liquidation and was actively used in ongoing production until the end. Auction-ID: A7-49302-162
Technical data Manufacturer: RECKERMANN Milling Machines, Solingen Type: Kombi 1000 Operating voltage: 380 V Frequency: 50 Hz Tool holder: DIN 2080 / SK 40 (Source: Online Research) Travel Y: 350 mm (Source: Online Research) Travel Z: 450 mm (Source: Online research) Travel X: 700 mm for 1,000 mm table or 1,000 mm for 1,300 mm table (Source: Online research) Spindle speed horizontal: 32–1,400 rpm (Source: Online research) Spindle speed vertical: 48–2,100 rpm (Source: Online research) Drive power: 6.1 / 7.4 kW (Source: Online research) Feed: 10–1,000 mm/min (Source: Online Research) Configuration Robust universal bracket milling machine with horizontal and vertical milling options. 3-axis digital display ANILAM MicroWizard. Large T-slot work table as well as machine vice and other swivelling clamping device. Manual handwheels and separate control panel available. Note informat ...
Technical data Manufacturer: MAZAK Corporation Model: Quick Turn 10N / QT 10N UNIV. Year of manufacture: 03/1987 Control: MAZATROL CAM T-2 Weight according to nameplate: 7,500 lbs Connection according to the marking: 380 V Max. swing diameter: 440 mm (Source: Online research) Max. machining length: 507 mm (Source: Online Research) Spindle speed: 10–2,600 rpm (source: online research) Spindle bore: 56 mm (Source: Online research) Travel X/Z: 155 / 540 mm (Source: Online Research) Tool turret: 8 positions (Source: Online Research) Configuration CNC lathe with tool turret and chuck. MAZATROL CAM T-2 CNC control with screen and control panel. Attached bar feeder available for material feeding. Lateral chip conveyor available. Closed work area with sliding door. Control was on at the time of shooting. Remarks The machine comes from a well-maintained company liquidation and was active ...
Object Mobile tool trolley ORION / Hahn & Kolb made of metal, with several drawers and storage space. Used version with signs of wear and dirt due to age and operation. Castors are sometimes clearly worn. Contents - Lathe chisel holder / clamp holder, partly with indexable inserts - Clamping devices, clamping jaws and clamping accessories - Tool holders, tips and lathe accessories - Twist drills of various sizes - Taps and other cutting tools - Smaller measuring equipment - Screwdrivers and hand tools - Various small and machine accessories Note Sale of the tool trolley including the pictured contents. Auction-ID: A7-49302-167
50 €
