proses mühendisliği için makineler ve tesisler kullanılmış satılık

ERSA HOTFLOW - 7 Continuous Dryer / Tunnel Dryer / Belt Dryer Type: HOTFLOW – 7 Convection oven as tunnel dryer / belt dryer / continuous dryer for Drying of panel materials on the top and bottom. 4 heating zones at the top, 4 heating zones at the bottom, for drying on both sides. Rolling rods at a distance of approx. 4.5 cm on 2 transport chains as a support for plates Temperature range from 20° to 300°C Nominal power Pn = 72 KW Nominal current In = 106 A Voltage: 3 x 400 / 230V Back-up fuse: 3 x 125 A Frequency 50 Hz Power 67 KW Year of construction 2000 Dimensions: Length: 5250 mm Width: 1300 mm Height: 1750 mm (incl. warning light) Height: 1450 mm (Without warning light) Dry section: Length of heating zones: 3300 mm Transport width: 500 mm The machine can be used as a soldering oven – soldering machine – reflow oven with little effort.  ...

max. temperature: 300 Gradsize of opening: . mmdepth of chamber: 750 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 1200x750x1620 mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 8500 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Glue dosing station MAYER AND MAYER DXR R2020R L-P-PUB PDX20 40-100 P manufactured in 2015 in Germany by MAYER & MAYER HANDELS GMBH. The station was in use for about 3 months in the process. After this time, it was shut down, cleaned and properly secured. All gaskets in the station were replaced with new ones. It is a charging station for manual dispensing / application guns for two-component adhesives. The gun is included for free. Spare parts are offered for the station. Price of the parts to be individually agreed.

Operational pressure: -1 to 4bar, workpiece temperature: -10 to 150°, capacity: 102,200l, height: 22,700mm, width: 2950mm, weight: 31.5t, was used for storing acrylic acid.

TECHNICAL SPECIFICATIONS Manufacturer: VIRTO Designation: Multi-frequency sieve Design: Dry screening Type: RS 2814.1 Year of construction: 2010 Number of screen decks: 1 screen deck Screen length: 2,800 mm Screen width: 1,400 mm Screen inclination: adjustable by crank system Screening area: 3.6 sqm Areas of application: 25 mm - 20 μm Drive type: Electric unbalance motor Drive cable: 4.1 kW Frequency: 50 Hz SPECIFIC COMMENT - 2 identical machines available - Machines were never used

Max. operating temperature: 150°C, compressed air supply: 6bar, power: 33kW, weight: 1.85t.

Nitrogen generators membrane or PSA systems for laboratory up to production (500 L/h to several m3/h) No more gas cylinders in laboratory, plant or car repair shop (tyre gas)! Wear-free operation >99.5% pure nitrogen from mostly existing in-house compressed air Constant and safe gas generation guarantees reliable analytical results Operation-free 24-hour operation also in hazardous areas Safe operation due to low operating pressures Economically thanks to fast payback even on a technical scale! N2 production according to the membrane process The nitrogen generators continuously supply nitrogen up to a maximum purity of 99.5%. After the compressed air flows through highly effective filters, the compressed air is decomposed in a hollow fiber membrane module into a concentrated nitrogen flow and an oxygen-enriched portion. The membrane process has ...

Filtration output: 150l/min, capacity: 600l, filtration surface: 0.75m², length: 2000mm, width: 1000mm, height: 1100mm.

Pharmaceutical, cosmetic, food and chemical stirrers / blenders Tripod agitator: VISCO JET® VJ200 - as good as new, unused because not ATEX The pilot plant agitator for research and production Can be used up to a container height of 500 mm, max. container diameter of 400 mm Manual lifting height adjustment, infinitely lockable, operation via touchscreen Safety switch for container clamping, emergency STOP switch. Including 5 different VISCO JET® agitators for low-, medium- and high-viscosity media Original price as offered (stainless steel roller table, touch screen, shafts and stirrers) was EUR 23.000,- net

There are nine identical fan coils available, are as good as new.

Mobile temperature control unit for water up to 90 °C. Filling quantity: 36.5 l.

There are five identical tanks available, capacity: 10,000l, max. operational temperature: 50°C, max. overpressure: pressureless, height: 4000mm.

Available in stock 1 x Used 1000 bar Two Stage Hydraulic Hand Pump with hose. The equipment is used but in good working conditions.

Max. rotational speed: 1300/min, max. capacity: 210kg.

Tank internal dimensions (lxwxh) 700x550x500mm Exterior dimensions (lxwxh) 880x730x750mm Basket dimensions (lxwxh) 640x490x80mm Ultrasound peak power 8000W 40 kHz operating frequency (others available) max. capacity 175Liter Heater 6KW 400V/50 Hz Clip on lid or hinged cover possible also available rinsing baths or dripping plates.

There are two identical centrifuges available, drum diameter: 1050mm, max. rotational speed: 550/min, max. capacity: 230kg, year of construction machine 1/ 2: 1978/ 1981.

New machine at work

Capacity: 115l, rotational speed: 2900/min, power: 12PS, material: V2A steel.

Dimensions L6000mm, H2000mm, W600mm Powder oven electrically heated 2 powder extraction wall Manual sliding system with transverse carriage incl. steel construction Handheld powderer Wagner Prima Sprint Assembly.

There are one CANNON A System 100 Pro and one CANNON A-10 System Servo available, year of construction machine 1/ 2: 1995/ 2002, including documentation.

Spray drying booth L8000mm, W4000mm, H2600mm All applicable standards 28.000m³/h in-blow-out Lacquered temp. 20°C Drying temp. 70°C Direct gas burner 300KW Stun, filter, grid assignment, Lighting.

Machine was overhauled and is fully functional, with documentation.

Available in stock 2 x Used Two stage Hand Pump. The equipment is used but in good working conditions.

Filtration surface: 2x 18.5m², output: 2x 1100l/min, operating temperature: 27°C, connected load: 90kW, with documentation.

Available in stock 1 x Used Azcue sludge pump model 1YE. The equipment is used but in good working conditions. H: 20 m Flow: 1 m3/h

Max. candle diameter: 50mm.

Available in stock 1 x Used Vicarb Heat Exchanger, model V45. Plates are stainless steel AISI 316. Frames are mild steel, painted. The equipment is used but in good working conditons. REP : 708 kW A MAXI: 165 mm A MINI: 159 mm Dimensions: 50cm x 53cm x 165cm (WxLxH) Weight: 540 kg

Volume flow: 1000m³/h, max. depression: 10,000Pa, motor power: 5.5kW, weight: 350kg.

Available in stock 3 x Used Azcue HFO Booster Pumps model BT-HM 38D2. Equipment is used but in good working conditions. Height: 50 m Flowrate: 3.5 m3/h

Capacity: 5000l, max. operational temperature: 30°C, diameter: 1500mm, height: 3750mm.