We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
utilisé
NARDINI - AM 400 A avec affichage numérique à 2 axes - Diamètre de braquage au-dessus du lit 850mm - Diamètre de tournage sur support 500mm -Alésage de la broche 120mm -Longueur de tournage 1000mm -Mandrin à trois mors - ROTAS 500 D7tarmg -Lynette -5x inserts multifix -Protection de l’alimentation Taille: LxlxH 3.7x1.6x2 mètres /Poids 4400Kg
utilisé
Numérique Diamètre de circulation au-dessus du lit 800 mm Diamètre de circulation via la glissière plate 600 mm Largeur maximale 2000 mm Vitesse 750 tr/min Multifix Tailstock (Tailstock)
nouveaux
Nouveau lathe. Distance entre les centres: 1000mm. Swing: 500mm. Balançoire sur la voiture: 305mm. Trou de fuseau: 80mm. Vitesses: 18. (19-1500rpm). Poids: 1680Kgs. Équipé de mandrin et de repos régulier.
nouveaux
Nouveau lathe. Distance entre les centres: 2200mm. Swing: 500mm. Balançoire sur la voiture: 330mm. Swing dans l’écart: 690mm. Trou de fuseau: 52mm. Vitesses: 18. (25-2000rpm). Dimensions: 3700x1000mm. Poids: 1750Kgs. Équipé de mandrin et de repos régulier.
nouveaux
Nouveau lathe. Distance entre les centres: 800mm. Swing: 350mm. Swing sur la voiture: 200mm. Trou de fuseau: 46mm. Vitesses: 18. (31,5-2500rpm). Puissance: 4hp. Dimensions: 2050x1000mm. Poids: 1100Kgs. Équipé de mandrin et de repos régulier.
utilisé
turning diameter over bed: 500 mm turning diameter over slide rest: 305 mm turning length: 1500 mm turning diameter in the gap: 710 mm turning speeds: 19 - 1500 U/min centre height: 250 mm spindle bore: 80 mm total power requirement: 9,2 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: 3,5 x 1,3 x 1,6 m Lead and pull spindle lathe - Digital display - Röhm 3-jaw chuck 250mm - Multifix steel holder - Coolant system - Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
utilisé
turning diameter over bed: 440 mm turning diameter over slide rest: 270 mm turning length: 1000 mm turning diameter in the gap: 630 mm turning speeds: 25 - 2000 U/min centre height: 220 mm spindle bore: 52 mm total power requirement: 6,3 kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 2,55 x 1,35 x 1,5 m Lead and pull spindle lathe - Digital display - Röhm 3-jaw chuck 200mm - Multifix steel holder - Coolant system - Machine light - Top condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
utilisé
Description: Retrofitted with digital display Drehlänge: 800 mm, turning diameter over bed: 350 mm, turning diameter over slide: 205 mm, spindle bore: 46 mm, turning speed range: 25-2000 rpm, weight approx.: 1,500 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 800 x 1,500 mm
utilisé
turning diameter over bed: 350 mm turning diameter over slide rest: 200 mm turning length: 800 mm spindle bore: 46 mm spindle turning speed range: 18: 25 - 2000 U/min spindle head: Din 55027 Gr. 5 total power requirement: 4,4/2,2 kW weight of the machine ca.: 800 kg dimensions of the machine ca.: 2 x 1 x 1,8 m Video available on our website.: Condition: ready for operation: Electric 380 Volt: 3 jaw chuck: neu 160 mm Multifix-toolholder with tapers: Rear chip protect: Faceplate: Röhm 310 mm Motor brake: Universal lathe from the training area with new 3-jaw chuck, face plate and multifix holder. It was not heavily used, which can be seen from the little paint wear on the back wall. We ask interested private parties to refrain from making an inquiry, as it is a well-preserved professional machine and is therefore too expensive (+ VAT!) for hobby mechanics. Machine dealer with own sto ...
utilisé
greates pass round over bed: 175 mm swing diameter over slide rest: 350 mm centre distance: 800 mm bed width: 220 mm spindle bore: 46 mm internal taper -metric: 50 (1:20) mm chucking diameter: 160 (max. 200) mm face slide travel: 225 mm upper slide: 100 mm swival range +/-: 45 Grad lead of leadscrew: 6,0 mm quill stroke: 130 mm dia. of quill: 50 mm taper: 3 MK number of spindle speeds: 3,5-2500 min number of spindles: 18 power capacity: 4,7 kW longitudinal feeds:: 0,051-1,034 mm/U face feeds: 0,025-0,517 mm/U metric threading: 0,4-7,0 mm Dimensions (L/W/H): 1920x990x1360 mm weight of the machine ca.: 900 kg voltage: 400 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.