used MAAG sh

SH75 max. wheel diameter 750 mm gear width 200 mm max. module 10 min. module 1 min. wheel diameter 30 mm max. number of teeth 300 min. number of teeth 6 tooth helical angle min/max 0 / 60 ° min. ram stroke 0 mm max. ram stroke 225 mm table diameter 500 mm table load 0,8 t no. of strokes 23,5 - 150 Hub/min table hole 90 mm total power requirement 7 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 2,1 x 1,7 x 2,1 m

MAX DIAMETER 750,MAX MODULE 10

Length: 0 mm Module: 10 mm Width: 0 mm MAAG - SH-75 Gear Shaping Machine Ø 750 x Modul 10 MACH - ID 6277 Make: MAAG Type: SH-75 Table Ø   500 mm Max. workpiece    750 Ø Modul     10 mm Working speed       23,5 - 150 mm Dimensions Length  2.100 mm Width   1.700 mm Height   2.100 mm Weight   4.800 kg

Various MAAG pump E.g. Extrex 90, 70, 56, and 36 Reconditioned available from stock in Wuppertal. more details on request

Semi-automatic flocking system Flockkabine MAAG flocking technology The system is used for coating and with different materials. It is also conceivable to use it as a painting system. In this particular case, the parts were coated for the automotive industry.

Planing comb to Maag gear planing machine

Maag VR4A Mk4 Admission in drilling-spindle (morse): Mk4 Max drilling capacity: 50/60 mm Longitudinal travel drilling-head (X-axis): 945 mm Height-travel arm (Y-axis): 710 mm Min dist. round column--drillingsp (X-axis): 310 mm Max dist.round column -- drillingspindle: 1265 mm Dia spindle: 40 mm Max drilling-depth: 310 mm Speeds: 40 > 2000 rpm Power on the spindle: 3 kW Height: 2240 mm Weight: 910 mm ACCESSORIES: 2860 mm Cooling system: 2,55 ton

BRAND: MAAG YEAR: 1979 MODEL: SH-600 APPLICATION TYPE: OTHER LOCATION: SOUTH KOREA MACHINE TYPE: OTHER AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: SIEMENS MODEL: SINUMERIK 840 D Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - MAX. WORKPIECE DIAMETER : 7500 MM - MIN. TIP DIAMETER : 400 MM - MODULE WITH SINGLE POINT CUTTER APPROX. MAX : 50 - MAX. MODULE WITH RACK-TYPE CUTTER : 50 - MAX. MODULE WITH RACK-TYPE CUTTER : 20 - MAX. NUMBER OF TEETH : 1000 - MIN. NUMBER OF TEETH : 12

Ref. -No.: 10103 Manufacturer: MAAG Year of construction: 1976 Type of control: Konventionell Control: N/A Storage location: Halberstadt Country of origin: Schweiz Minimum number of teeth: 6 Max. Number of teeth: 300 Serial no.: 4216 Gear width: 200 mm Max. Pile driving: 225 mm Max. Wheel Diameter: 750 mm Min. Wheel Diameter: 30 mm Table Diameter: 500 mm Max. Module: 10 mm Min. Module: 1 mm Spiral Angle: 0/60 °

* General * SKU020C068 * LocationBarneveld * MakeMaag Systfems Zurich * TypeNCHP -110/110 * Mach.No.818 773 1 * Pressure * Working pressure120 Bar * Main Features * MaterialMild steel * Volume24000 Ltr. * Motor15 KW * Specified Features - Rotary Lobe Pump * Pumpcheck * Capacity24000 l/h (deltaP 0 bar) * With motor15 kW (380V, 710 rpm, (Ex)) * Inletdia. 110 mm * Outletdia. 110 mm * Rotary Lobe Pumps * MaterialMild steel * Information * Year of constructionunknown * Floorspace1,4 x 0,5 m * Total height0,6 m * Weight600 kgRotary Lobe PumpsMaag SystemsPumps > Rotary Lobe PumpsBrand > Maag Systems What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Semi-automatic flocking system The system is used for coating and with different materials. It is also conceivable to use it as a painting system. In this particular case, the inner parts were coated by handheld compartments for the automotive industry. The handheld boxes hung on a chain conveyor belt and were first sprayed with glue by hand. Afterwards, the boxes were sprayed with the flocking material in the individual flock cabins. The spraying direction changes from station to station.

we offer for sale an unused granulation unit for compounding lines.

max. wheel diameter: NA mm gear width: NA mm max. module: min. module: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Manually operated 2-Flank Gear Tester The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 600 mm gear width: 150 mm max. module: 15 min. module: 1 clamping length min.: 45 mm clamping length max.: 750 mm workpiece weight: 150 kg total power requirement: kW weight of the machine ca.: 0,55 t dimensions of the machine ca.: 1,2x0,8x1,95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used hydraulic unit with accumulator

Automatic sheet to sheet Laminator DGM ETH1650  Manufacturer : DGM  Year of Installation : 2014  Year of Manufacturing : 2014  Format : 1650x1450  Description :  High Speed Automatic Sheet to Sheet Carton Laminating Machine  - Maximum paper size : 1650 x 1450 mm  - Minimum paper size : 380 x 380 mm  - Top Sheet : 180-350 gm/m2  - Corrugated Board: E,F,B,C,A & up to 5 layers  - Carton Board: min 250 gm/m2  - Speed : 5000 s/h  - Line speed: 130m/min  - Dimensions: 14.5 x 2.6 x 2.7 m  - Weight: 8.5 ton  - Power Consumption: 15.7 kW

- Hobelbreite 22 - 160 mm - Hobelhöhe 10 - 100 mm - min. Werkstücklänge 100 mm - 4 Spindeln - Spindel FI 40 mm - Drehzahl 7500 U/min - Vorschubgeschwindigkeit stufenlos 6 - 36 m/min - Kettenbreite Vorschub 20 mm - max. Spanabnahme untere Welle 10 mm - Aufgabetischlänge 1200 mm - 1. Welle unten 5,5 kW ,Werkzeug FI 125 - 160 mm - 2. Welle rechte 5,5 kW ,Werkzeug FI 125 - 160 mm - 3. Welle linke 5,5 kW ,Werkzeug FI 125 - 160 mm - 4. Welle oben 7,5 kW ,Werkzeug FI 125 - 160 mm - Motor Vorschub 2,2 kW - Motor Höhenverstellung 0,75 kW - Satz Vorschubwalzen FI 140 x 35 x 50 mm, FI 140 x 35 x 20 mm, FI 140 x 35 x 16 mm - Absaugstutzen 4 x 130 mm - Druckluftanschluss max. 6 bar - pneumatischer Andruck der Vorschubwalzen - Vorschubsystem mit Kardanantrieb - Gleitmittelpumpe - inklusive Hobelköpfe - Abmessungen L= 3150, B=1510, H=1600 mm - Gewicht 3500 kg

For sale we offer used SHOE SORTER from VANDERLANDE. The sorter is after extensive overhaul in 2019 and replacement of elements with new (drive motor, bearing, control cabinet, camera, slots, servo motors, electrical installation). Automatic sorting systems are used for the transport and handling of materials in retail and wholesale as well as for all sales activities including electronic commerce. The advantage of the sorters is short time, maximum efficiency and precision in order processing. technical data: Dimensions of available sorters: Sorters 1 and 2 1.27 m wide The width of the belt is 1.10 m Height 0.63 m Distance from the ground 0.82 m Length 110 m Sorter 3 1.10 m wide Bandwidth 0.95 m Height 0.71 m Distance from the ground 1.10 m Length 33.5 m Sorter 4 1.27 m wide Bandwidth 1.11 m Height 0.63 m Distance from the ground 0.82 m Length 107.5 m S ...

Cutting unit consisting of: 7 rotating blades and 8 fixed counter blades. Incl. hydraulic presser Technical data: Throughput: Depending on the material and hole screen Power consumption: 17 kW Dimensions: (L x W x H) 154 x 115 x 170 cm Hopper: 1,180 x 1,120 mm Weight: approx. 1.200 kg Hole screens: 2 pieces (10 mm and 15 mm) Application for: Materials such as copper, aluminum cable, non-ferrous metals, rubber, plastics, wood, and composites

Ling Systems Stainless heat shrink tunnel, stainless mesh belt, variable speed belt dimensions 2500mm x 400mm, max product height 80mm, adjustable digital temp control

New floor oven HEIN, type: Shopestone -exhibition exhibitor- - Ring tube oven - electric heating - Number of flocks: 5 pieces - Sheet size holder: 60 x 80 cm - Dimensions: B 1,300 x D 1,700 x H 2,145 mm - Exhibition exhibit - Condition: Very good, ready for immediate use Delivery and installation possible by arrangement.

SHARK 281 CCS (Cut Control System) manual bandsawing machine to cut from 0° up to 60° left. Other than the manual cut mode, the sawing machine can make single cuts without operator, using the head weight control- led by a hydraulic brake: after the cut the band stops. The frame at this point is manually lifted to the position needed in order to reposition the bar to cut . In the version with pneumatic vice (MA) the vice is opened/clo- sed by a manually-controlled valve (optional with pedal control). BEST PRICE IN EUROPE!!

SHARK 281, manual band sawing machine to cut from 0° to 60° left. A FEW FEATURES: Electric panel (wiring totally identifiable, stand-by, loose-key safety switch, main switch, pole change switch, emergency stop, motor magneto-thermal overload, minimum tension coil, protection against missing phase, low tension safety device (LTSD 24 V).- IP55 control handle. BEST PRICES FOR ALL MEP MACHINES IN EUROPE! ASK FOR A QUOTE!!

FOR SALE: NEW & UNUSED REMOTE CONTROLS FOR BPN 300 WETSHOT CRETE PART NO: 10159971

Sleevit Shrink tunnel Model: Shrinkmaster 750 Stainless machine on variable speed stainless slat chain conveyor, belt width 120mm, max product height 250mm, overall length 3000mm, 3Ph