zf used for sale

Boiling kettle ZFM Type: KP-500 Capacity: 500L Heating energy: Natural gas Device dimensions: 1450 x 1250 x 1200 mm Chamber dimensions: 850 x 1000 x 620 mm Electric power supply: 230V Year of production: 2017 Built of stainless steel Items in magazine: 1 Conditon: Used Price on request, We have many other equipment : Bitzer, Copeland, Frascold, Lunite, Kueba, Guentner, Eco, Alfa-Laval, Goedhart, Helpman

Time relay PILZ ZFS/10s/110V~/1Uz 651175 0 - 10 sec 110 V AC 2 VA 40 - 60 Hz 250 V AC 5 A 750 VA used ! Dimensions: 105 x 85 x 23 mm

2.5:1

ZF MARINE GEARBOX ZFW 4610 5.037:1

[ 5000 characters max., no information about the advertiser ] Brand:MODUL Model:ZFWZ 2000/3 Type:Gear Hobbers Year:1981 Location:Czech Republic Specification: Max diameter of gear without tailstock 2100 mm Max diameter of gear with tailstock 1450 mm Max face of gear 1060mm Max module with hobbing head 22 Max/ Min center distance 1240/150 mm Min number of teeth 10 Max pressure angel 45 deg Table dia / number of slots 1800 mm/12 Bore in table / length 600/800 mm Max dia of hob / length 300/330 mm Max weight of workpiece 15000 kg Accessories: Standard milling head Tailstock (no clamping) Set of gear supports (shoes) Set of arbors Set of change gears

Steam generation plant consisting of Double flame tube boiler with economiser, 2 x SAACKE burner Teminox for natural gas H, calorific value HS 11.4 kJ/Nm³, 14MW (2 x 7 MW), 17 to. Saturated steam at 20 bar ü (25 bar hp). Boiler: Manufacturer LOOS Deutschland GmbH Type ZFR 2300 Type of large-capacity water boiler with two flame tubes (three-speed) and a flue gas water preheater (Economizer) Permissible operating pressure (PS): 24-25 bar Permissible operating temperature: 224°C Permissible steam output: 23 to. Saturated steam Burner: 2 x SAACKE Type Teminox GS 75-22 Fuel: Natural gas There is a soundproofing hood for each burner Fireplace: 37 meters above ground Outlet area: 0.507 m² Stainless steel double fireplace Water treatment plant Manufacturer CHRIST consisting of softening system and downstream reverse osmosis system Complete installation from y ...

control:siemens 1P 6SL 3054--0CE01-1AA0 Documents:vorhanden

Suitable for conveying bayonet rings, pneumatic supply: 6bar, with documentation.

Code 151301 DESCRIPTION Gear Hobber Ø 250 x modul 6 Make Modul Model ZFWZ 250/3 Serial number 112 625 Year ± 1983 Ma. Workpiece diameter 250 mm Max. modul 6 Max. axialmovement 275 mm Max. tangential movement 100 mm Max. gearangle setting 45 degrees Max. diam. millingcutter 145 mm Max. millingcutter length 170 mm Diameter clampingtable 275 mm Diameter tablcenter positioning 200 mm Distance millingcutter to clampingsurface min/max. 195 – 470 mm Distance middle millingcutter to center table 20 – 230 mm Millingspeeds in steples in 2 Ranges 20 – 200 rpm 125 – 400 rpm Feeds axial 0.2 – 100 mm/wheel/rounds radial 0.025 – 4 mm/wheel/rounds tangential 0.1 – 5 mm/wheel/rounds Power main motor 7.5 kW – 380 Volts Power connection 22 kVA Accessories Chipconveyor All speedchang ...

Gear hobber MODUL ZFWZ 2000x20/II Year: 1978 Max work diameter: 2100mm Table Size: 1800mm Max. D.P .: 20 Arbor diameters: 6: Ø60 (x2), Ø40 (x2), Ø32, Ø80 Change wheels: Yes Weight: 40 tons Gear hobber MODUL ZFWZ 2500/3 Year: 1980 Max work diameter: 2500mm Gear Width: 850mm Table Size: 1800mm Max. D.P .: 22/27 Diameter of hole in the table: 700mm Hob vertical traverse: 850mm Arbor diameters: 6: Dia. Ø60 (x3), Ø80 (x2), Ø50 (x1) Coolant tank: Yes Change wheels: Yes Tail stock: Yes Engine: 48KW Length: 7000mm Width: 3000mm Height: 4000mm Weight: 44500 kg

Hobbing machine Manufacturer WMW Type ZFWZ 1250 x 14 diameter 1250mm module 14 Machine is in a used good condition. Ink. Documentation and interchangeable wheels

Gear Hobber WMW MODUL ZFWZ 1500 x 15

Max diam 250 , max lenght 2000, 3 x heads , change gears

MAX DIAMETER 1500 MAX MODUL 15

Pastry table Rondo Doge SFT 370 A + ZFGRA -with guillotine -with filling container -with cutting rollers -with folding shoes -Strap width: 64cm -Built in 2010 -External dimensions: 380x110x186cm WxDxH

Conveyor belt, belt conveyor, conveyor belt, belt conveyor -Belt width: 2x 30 mm -Width: adjustable -Conveyor belt length: 1450 mm -Drive motor: with frequency converter -Drive: 0.075-0.37 kW -Speed: 14-72 rpm -Height: adjustable -Number: 4x conveyor belts available -Price: per piece -Dimensions: 1450/550/H950 mm -Weight: approx. 150 kg

Conveyor belt, belt conveyor, conveyor belt, belt conveyor -Belt width: 2x 32 mm -Conveyor belt length: 1500 mm -Drive: 0.37 kW -Speed: 71 rpm -Conveyor belt: rotatable -Height: adjustable -Number: 4x conveyor belts available -Price: per piece -Dimensions: 1500/800/H950 mm -Weight: approx. 300 kg

max. wheel diameter: 250 mm gear width: 275 mm max. module: 5 table diameter: mm weight of the machine ca.: 5 t change gear, internal cutting head, normal head and tangential head. Video Link: http://www.youtube.com/watch?v=90urAqbFCTI Photos: https://picasaweb.google.com/104950607176033391845/ModulZFWZ3000X30MmG earHobber The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roller conveyor, roller conveyor, powered roller conveyor, roller conveyor -stable execution -electrically driven -Servo motor: Type: 1FK7032-5AK71-1PG0 49 rpm -Roll width: 1450 mm -Conveying length: 1500 mm -Diameter roller: 105 mm -Rollers: rubberized -Diameter shaft: 25 mm -Delivery height: 950 mm adjustable -driven: via belt -Dimensions: 1500/1650/H950 mm -Weight: approx. 230 kg

Roller conveyor, roller conveyor, powered roller conveyor, roller conveyor -stable execution -electrically driven -Drive motor: 0.18 kW 76 rpm -Roll width: 1450 mm -Conveying length: 1480 mm -Diameter roller: 105 mm -Rollers: rubberized -Diameter shaft: 25 mm -Delivery height: 950 mm adjustable -driven: via belt -Number: 3x roller conveyors available -Price: per piece -Dimensions: 1480/1650/H950 mm -Weight: approx. 230 kg

Conveyor belt, belt conveyor, conveyor belt, belt conveyor -Belt width: 2x 50 mm -Width: adjustable -Conveyor belt length: 1440 mm -Drive: 0.37 kW -Speed: 71 rpm -Conveyor belt rotatable via servo motor -Height: adjustable -Dimensions: 1440/550/H950 mm -Weight: approx. 150 kg

Key data: 460 mm, 10

BEVEL GEAR SPIRAL GENERATOR

Seewer Rondo Fountain Pen Type: ZFGP. B30 for pastry lines Stainless steel 6 rows with air compressor connection

max. wheel diameter: 400 mm gear width: 275 mm gear width: 275 mm max. module: 6 weight of the machine ca.: 5,3 t shifting: 100 mm dist. cutter spindle - workpiece spindle: 40/265 mm hob turning speeds: 50-400 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 59 rpm -Power: 0.18 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 55 -Number: 2x motors available -Price: per piece -Dimensions: 330/160/H160 mm -Weight: 10 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 59 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: 25 mm -Protection class: IP 55 -Number: 3x motors available -Price per piece -Dimensions: 335/175/H160 mm -Weight: 11.6 kg

Gear motor, electric motor, electric gear motor, gear motor for stop -Speed: 7.1/320 rpm -Power: 0.16/3 kW -Construction: B5 -Diameter shaft: 30 mm -Protection class: IP 54 -Weight: 40 kg

Gear motor, electric motor, electric gear motor, gear motor for stop -Speed: 7.1/320 rpm -Power: 0.16/3 kW -Construction: B5 -Diameter shaft: 30 mm -Protection class: IP 54 -Weight: 40 kg

Gear motor, electric motor, electric gear motor -Speed: 25.5/51 rpm -Power: 0.3/0.45 kW -Shaft: Ø 25 x 60 mm -Construction: B5 -Protection class: IP 55 -Dimensions: 395/168/H190 mm -Weight: 19 kg

Gear motor, electric motor -Motor comes from: Gansow scrubber-dryer -Connection: 24 volts -Speed: 160 rpm -Power: 1 kW -Diameter shaft: Ø 25 mm -Number: 7x available -Price: per piece -Dimensions: 390/140/H160 mm -Weight: 13 kg

Gear motor, electric motor -Motor comes from: Gansow scrubber-dryer -Connection: 24 volts -Speed: 180 rpm -Power: 0.5 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Number: 3x gear motors available -Price: per piece -Dimensions: 345/130/H165 mm -Weight: 12 kg

Gear motor, electric motor, stop motor, drive motor, electric gear motor, three-phase motor -comes from a Homag double-sided edge banding machine -Power: 0.18/3 kW -Speed: 7/320 rpm -Construction: B5 -Shaft diameter: Ø 30 mm -Protection class: IP 54 -Motors separated by a 24 volt coupling -Number: 2x gear motors available -Price: per piece -Dimensions: 650/320/H230 mm -Weight: 35 kg

Gear motor, electric motor -Speed: 20 rpm -Power: 0.25 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 55 -Number: 1x motors available -Price: per piece -Dimensions: 400/170/H185 mm -Weight: 17 kg

Gear motor, electric motor, electric gear motor -Speed: 19.5 rpm -Power: 0.25 kW -Diameter shaft: Ø 25 mm -Construction: B5 -Price: per piece -Number: 2x available -Protection class: IP 44 -Dimensions: 390/170/H190 mm -Weight: 16 kg

max. workpiece diameter: 500 mm threading length: 1250 mm max. module: 12 min. module: 0,5 total power requirement: 8 kW weight of the machine ca.: 4,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Product number: 2858 Type: PM.ZFG-00 Serial number: PM.ZFG-00 Year of construction: 2013 Power: 3 x 400V, 50Hz, 1.9kW Dimensions: 1600 x 1200 x 2100 mm Plucker for shredded meat

tool taper: MK4 diameter of tools max.: Ø 145 mm table-size: L: 800 x B: 700 mm surface area: Ø 300 mm table travel: 200 mm total power requirement: 7,5 kW weight of the machine ca.: 4,9 t dimensions of the machine ca.: 2,8 x 1,5 x 2,3 m Additional information: Application: Gear hobbing machine for gear cutting of spur and helical gears, worm gears and rollable profiles Cycle milling and single milling as well as up-cut and climb milling Specifications for machining spur and worm gears: -Outer Ø max. 250mm with counterholder -pitch max. 5mm -Tooth helix max. 45° -Tooth width max. axial milling 200mm and radial-axial milling 240mm -Milling width max. clamping table counterholder 655mm Milling slide: -swivelling 210° -travelling distance 350mm -feed, 2 directions, 16 steps in the range 0.2 - 6.3 mm/revolution Further features: -counter-point taper MK4, co-rotating -Centre distance of  ...

max. workpiece diameter: 500 mm threading length: 1250 mm max. module: 12 min. module: 0,5 total power requirement: 8 kW weight of the machine ca.: 4,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 500 mm, 300 mm, 5

I am selling a well-used gear milling machine from WMW Modul, model ZFWZ 500x5. The machine is fully functional and runs without any problems. The foot (coolant device) and the entire machine were completely cleaned. The connection cable and plug were replaced. When sold, the entire oils are renewed. Largest wheel diameter is 500mm Largest module is 5. The weight of the machine is 1950kg. Incl. complete, original cabinet with interchangeable wheels and an instruction manual. The machine has already been overhauled. The guides show almost no signs of wear. If you have any further questions, please do not hesitate to contact us. The machine can be viewed and tested under power by prior appointment. On-site loading is no problem and free of charge. The sale is without guarantee and warranty. Returns are excluded. All information is subject to change.

max. workpiece diameter: 250 mm threading length: 800 mm max. module: 8 min. module: 1 total power requirement: 10 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 3,05x1,75x1,60 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Under current

max diam 250 , max modul 5

Key data: 250 , 400 , 10

The machine needs to install the new electric system Specification: Work table diameter 580 mm Gear diameter 630- 710 mm Gear width 400 mm Module range 1-10 Max. axial feed travel 400 mm Max. tangential feed travel 200 mm Max. helix angle 45 degrees Min. number of teeth hobbed 10 Min. number of teeth hobbed (indexing drive) 5 Max. hob diameter 200 mm Max. hob length 250 mm Diameter of hole in table 100-250 mm Depth of hole in table 45-300 mm Distance center of hob to table 175-575 mm Distance center of hob to center of table 50-505 mm Driving taper for hob arbor (step taper) 50 mm Hob speeds of universal hobbing head steeped 50-400 rpm Milling spindle speeds 40-400 rpm Axial feeds 0,2-10 mm/rev Tangential feeds 0,1-5 mm/rev Radial feeds 0,1-1 mm/rev Main motor capacity 29 kW Direct current 10 kW Machine dimensions 3380x2715x2250 mm Machine weight 9200 kg

max diam 340 , max modul 8

max. workpiece diameter: 500 mm threading length: 1250 mm max. module: 12 min. module: 0,5 total power requirement: 8 kW weight of the machine ca.: 4,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: WMW Type: ZFWZ 500 x 5 Stock number: 1010 Wheel diameter - max.: 500 mm Wheel width: 180 mm Module - max. 5 Module - min. 0.5 Total power requirement 3.5 kW Machine weight approx. 1950 kg Table bore: MK 5 Distance between milling cutter and workpiece 10 - 200 mm Speed range: 50 - 200 rpm Table diameter: Ø 250 mm Control: conventional

max. workpiece diameter: 500 mm threading length: 1250 mm max. module: 10 min. module: 1 workpiece dia. over saddle: 250 mm spindle bore of workspindle: 102 mm quill stroke: 100 mm workpiece turning speeds: 0,0032 - 2,6 U/min feeds - rolls: 0,027 - 5,66 mm/WU feeds - longitudinal: 0,3 - 198 mm/min main drive: 4 kW swivel angle for work spindle: 90/120 ° diameter of hob: 150 mm milling width: 100 mm hob turning speeds: 45 - 560/900 U/min total power requirement: 9,5 kW weight of the machine ca.: 4,2 t Machine equiped with: - Heavy Duty Hob Head ApFw - change gears - Milling Head ApFF The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max diam 670 , max modul 12

Description: Electrical connection 10.5 kW, machine number ,11520, oil hydraulic pressure 130 bar, movable optimizing laser, stop setting range 0 to 25 mm, light barrier and protective grid at the rear, control: ferrocontrol, type: MAG2, electrical connection 10.5 kW, with EC declaration of conformity issued in July 2009, accessories : Spare blade serial number: 11,520, cutting length: 3,210 mm, Approx. Onsite Dimension. (l x w x h): 5,200 x 1,800 x 2,100 mm, weight approx.: 8,600 kg

Description: max. module: 8 mm table diameter: 370 mm largest diameter of the machined wheel: 400 mm rated power: 35 kVA chip conveyor  , equipment: shift wheel cabinet set of shift wheels shanks for mounting cutters - 5 pieces milling stands pins mounting sleeves claws for mounting pins technical and commissioning documentation and user manual in Polishwiring diagramsworm cutters  , , dimensions: installation dimensions: ,3300 x 2850 x 2300 mm transport dimensions: ,3150 x 2000 x 2300 mm control cabinet: ,1000 x 400 x 2300 mm 3 x Euro pallets with equipment: ,1200 x 800 x 500 mm tool locker: ,1000 x 650 x 1200 mm  , with equipment for cylindrical gears  , the offer does not include other elements of machines, devices and tools that are not related to the machine  , please also have a look at the videos and  ...