wmw ruhla used for sale

max. workpiece diameter: 500 mm threading length: 1250 mm max. module: 12 min. module: 0,5 total power requirement: 8 kW weight of the machine ca.: 4,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear grinding machine ZSTZ 500x10 with change gears.

Key data: 250 mm, 500 mm

Circulation diameter over bed 500 mm Max. turning length 1,600 mm Connected load 5.5 kW Machine weight 4.4 t

Slip-on cutter, insert cutter WMW FPXH63-16 074581 TGL 38502/06 Diameter: Ø 80 mm 5 Cutting with one holder each for inserts SK40 New Dimensions: 195 x 80 x 80 mm

turning diameter over bed: 400 mm turning diameter over slide rest: 200 mm turning length: 1500 mm turning diameter in the gap: mm turning speeds: 28 - 1400 U/min centre height: 200 mm spindle bore: 50 mm total power requirement: 10,4 kW weight of the machine ca.: 2,85 t dimensions of the machine ca.: 3,5 x 1,4 x 1,6 m Center lathe - Rapid traverse - Faceplate 400mm - Multifix steel holder - Coolant system - Feed protection - chip trays - Chip protection wall - Emergency stop facility - Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Moving centering point, heavy duty grain tip ROTERBERG, WMW DREHMEISTER Type P TGL 30-2325 diameter : Ø 155 mm Grains diameter: Ø 64 mm inner diameter (receptacle): 135 / 127 x 102 mm (conical) used, tested ! Dimensions: 299 x 155 x 155 mm

Inv. Num. : 7283 Type: PME 315 T Producer: WMW Generated:- Parameters: Compressive force: 315 t Table length: 2220 mm Table width: 1225 mm Maximum stroke rate per minute: 75 1/min Plunger adjustment: 130 mm

Shell end milling cutters, milling cutters, milling cutters, shell milling cutters -Manufacturer: WMW, shell milling cutter, shell end milling cutter type N 9960 -Size: 160x63x50mm -Receptacle: Ø 50 mm -Dimensions of box: 175/175/H100 mm -Weight: 5.9 kg

diameter: 200 mm amount: 6 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool holder, milling holder, milling tool, long milling arbor -5x recordings: SK50 -3x diameter: Ø 40 x 1010 mm -1x diameter: Ø 32 x 1000 mm -1x diameter: Ø 27 x 830 mm -Sale: only complete -Weight: 109kg

max diam 250 , max modul 5

Hob WMW / PWS ( WMW/PWS ) Type G pitch 3 HSS 9560 20° TGL 29-8002 bore Ø 40 mm New ! Dimensions ( cutter ): 108 x 100 x 100 mm Dimensions ( packaging ): 115 x 115 x 120 mm

Key data: 250 , 400 , 10

The machine needs to install the new electric system Specification: Work table diameter 580 mm Gear diameter 630- 710 mm Gear width 400 mm Module range 1-10 Max. axial feed travel 400 mm Max. tangential feed travel 200 mm Max. helix angle 45 degrees Min. number of teeth hobbed 10 Min. number of teeth hobbed (indexing drive) 5 Max. hob diameter 200 mm Max. hob length 250 mm Diameter of hole in table 100-250 mm Depth of hole in table 45-300 mm Distance center of hob to table 175-575 mm Distance center of hob to center of table 50-505 mm Driving taper for hob arbor (step taper) 50 mm Hob speeds of universal hobbing head steeped 50-400 rpm Milling spindle speeds 40-400 rpm Axial feeds 0,2-10 mm/rev Tangential feeds 0,1-5 mm/rev Radial feeds 0,1-1 mm/rev Main motor capacity 29 kW Direct current 10 kW Machine dimensions 3380x2715x2250 mm Machine weight 9200 kg

Hobs WMW / PWS ( WMW/PWS ) Type G pitch 3,5 HSS 9560 20° TGL 29-8002 bore Ø 40 mm New Dimensions ( cutter ): 108 x 100 x 100 mm Dimensions ( packaging ): 115 x 115 x 120 mm

max diam 340 , max modul 8

3-jaw chuck, three-jaw chuck, lathe chuck WMW NILES DH-B 315 x 3 x 6 outer Ø: 315 mm Bore Ø: 100 mm Height with jaws: 130 mm bolt circle: 33 / 290 mounting: M14 3 jaws extra Speed max.: 1800 rpm min. 20-240 mm max. 75-240 mm complete with inner and outer jaws Dimensions: 315 x 315 x 150 mm

max. workpiece diameter: 500 mm threading length: 1250 mm max. module: 12 min. module: 0,5 total power requirement: 8 kW weight of the machine ca.: 4,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 11000 mm y-travel: 2.500 mm workpiece height: mm table width: mm table length: mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 36 mm square edge steel: 30 mm L-beam: 100x10 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 8000 mm y-travel: 2.500 mm workpiece height: 2.360 mm table width: 2.240 mm table length: 10.100 mm weight of the machine ca.: t dimensions of the machine ca.: 20,0 x 8,5 x 5,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

heavy press with casting stand

WMW Niles DLZ Ø 630 x 2000 mm Distance between centers: 2000 mm Swing over bed: 630 mm Swing over cross-slide: 400 mm Swing in gap: 720 mm Diametre of main spindle bore: 72 mm Power on main spindle: 19 kW Number of speeds: 28 > 1400 rpm Total power needed: 220V Weight: 4,8 ton

Key data: 2500 mm, 3 mm

powerful crankplate shear WMW ScTP 3.15x2500 - Precise cutting with 10 tons of cutting force - With the powerful cranked clasp shear from WMW, type ScTP 3.15x2500, we offer a reliable cutting machine for precise sheet metal processing. With a cutting force of 10 tons and a torque of 27,500 kgcm, these guillotine shears are ideal for various applications in sheet metal working. Specifications: - Manufacturer: WMW - Model: ScTP 3.15x2500 - Cutting force: 10 tons - Torque: 27,500 kgcm - Sheet thickness: 3.15 mm - Maximum material strength: 50 kg/mm² - Power consumption: 3.5 kW (see nameplate for more data) - With an impressive cutting force of 10 tons, the WMW ScTP 3.15x2500 effortlessly masters sheet thicknesses up to 3.15mm. - The crankplate shears deliver precise cuts that still meet the highest quality standards. - The robust construction and powerful torque make th ...

Key data: 40 mm, 315 mm, 200 mm

Solid column drilling machine of the brand WMW, model BS 25 B Mk4 Ready to use. Technically flawless Machine Type: Column Drilling Machine Make: WMW Saalfeld Type: BS 25 B Year of construction: 1962 Control Type: Conventional Freight base: ex-site, freely loaded Location: 17034 Neubrandenburg Shipping time: immediately Price: 2.250,00 net Technical details Drilling performance in steel (diameter): 6 - 40 mm Projection: 315 mm Drilling stroke: 200 mm Headstock adjustment: 280 mm Spindle speeds - infinitely variable: 63...1000 rpm Spindle mount MK: MK 4 Feed: 0.08...1.2 rpm Clamping surface table L x W: 700 x 600 mm Clamping surface of the base plate: 440 x 490 mm Distance Spindle / Base Plate: 1100 mm Total Power Requirement: 2.61 kW Machine weight approx.: 1000 kg Dimensions machine approx. LxWxH: L:1010 x 700 x 235 ...

Fully functional and still energized. Can be seduced by the owner with pleasure . Tons of accessories included.

Key data: 690 mm, 400 mm, 500 mm

Universal milling machine from WMW, type FW Good general condition Mechanically flawless function Milling Machine - Horizontal Make:WMW Fritz Heckert Type: FW 250x1000/2 Year of construction: approx. 1980 Control Type: Conventional Freight base: ex-site, freely loaded Location: 17034 Neubrandenburg Shipping time: immediately Price: 2,800 net free loading Technical details: x-travel: 690 mm Y-travel: 400 mm z-travel: 500 mm Table Mounting Surface:: 1250x250 max. table load: 1500 kg Spindle speeds:: 18 steps/step 55-2800 rpm Height above floor: 1350 mm Feed rate: 10-630 infinitely variable m/min Tool holder: SK40 Total power requirement: 6.3 kW Machine weight approx.: 2.0 t Machine dimensions LxWxH: L:1.8xW:1.7xH:2.0 m The work table can also be adjusted manually. The projection of the counter-holder boom = 500mm, the total length = 1050mm. with end pos ...

Horizontal Bracket Milling Machine Universal milling machine WMW Heckert FU 250 x 1000 • Table LxW: 1,250 x 335 mm • Spindle: 28 – 2800 rpm • Tool holder: SK 40 • Rapid traverse in: X-Y-Z • 3-axis digital display • Coolant device • Task lighting • Connected load 6 kW • Accessories: according to picture • Dimensions: L x W x H.: 1800 x 1600 x 1900 mm • Weight: 1,700 kg Good condition flawless operation Currently still with 400V collar plug -> will be converted to CEE plug on request Includes a wide range of accessories A function video can be sent via WhatsApp. The machine can be viewed in our showrooms at any time. You are very welcome - metalworking machines and accessories on more than 1000 square meters On-site loading with forklift no problem

Thread cutting head, thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW, self-opening thread cutting heads type A2 13 pieces -Size: M16 x 1.75 recording MK3 2 pieces -Size: M10 x 1.5 1 piece -Size: Ø 17 mm 10 pieces -Price/tax: complete -Transport dimensions: 400/250/H270 mm -Weight: 22 kg

Twist drill, high-performance drill, drill, 3 pieces WMW diameter: Ø 41,5 / 49.0 / 50.0 mm Cutting material: HSS Surface: Uncoated flute length: 190 / 215 / 235 mm Coolant supply: External Tool holder: MK 4 Number of cutting edges: 2 Cutting direction: right used, checked ! Dimensions ( Ø 41.5 mm ): 345 x Ø 41.5 mm Dimensions ( Ø 49.0 mm ): 366 x Ø 49.0 mm Dimensions ( Ø 50.0 mm ): 395 x Ø 50.0 mm

Twist drill, high-performance drill, drill, 5 pieces WMW diameter: Ø 40,0 / 43.0 / 45.0 / 46.0 / 47.0 mm Cutting material: HSS Surface: Uncoated flute length: 205 / 190 / 195 / 215 / 210 mm Coolant supply: External Tool holder: MK 4 Number of cutting edges: 2 Cutting direction: right used, checked ! Dimensions ( Ø 40.0 mm ): 359 x Ø 40.0 mm Dimensions ( Ø 43.0 mm ): 344 x Ø 35.0 mm Dimensions ( Ø 45.0 mm ): 350 x Ø 45.0 mm Dimensions ( Ø 46.0 mm ): 215 x Ø 46.0 mm Dimensions ( Ø 47.0 mm ): 362 x Ø 47.0 mm

Maximum loadable weight (capacity between the tips) t 80 Machine weight t 160 Nominal turning diameter mm Ø 1,800 Maximum turning diameter mm Ø 1,900 Maximum diameter of passage on the bench mm Ø 2,600 Max turning length (distance between centers) mm 11,925 (12,025) Spindle axis height 1,300 mm Plateau diameter mm Ø 1,900 Plateau grip range mm Ø 300 ÷ Ø 1,350  Grip range 1 mm Ø 300 ÷ Ø 550  Grip range 2 mm Ø 500 ÷ Ø 950  Grip range 3 mm Ø 900 ÷ Ø 1,350 Clamping force (with max tightening torque 250 Nm) kN 200 Spindle motor power kW 160 Total installed power kW 310 Maximum spindle torque kNm 155 Spindle rotation speed range rpm 1 ÷ 150  Spindle rotation speed in 1st rpm range 1 ÷ 24  Spindle rotation speed in 2nd rpm range 20 ÷ 60  Spindle rotation speed in 3rd rpm range 50 ÷ 150 Carriage forward speed in transverse direction (X� ...

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW ABW, tapping chuck holder MK3 -Type: GB3 -Bore: Ø 24 mm -Dimensions: Ø 80 x 264 mm -Weight: 3.7 kg

Face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW, face driver -Type: MS5 -Forehead dimension: Ø 65 mm -Quantity: 9x centering tips available -Price per piece -Recording: see photos -Dimensions total: Ø 74 x 220 mm -Weight: 2.9 kg/pc.

Dressing device for abrasives WMW Travel: 50 mm ± 90° swivel Tool holder 1 : MK0, inclined approx. 5° Tool holder 2 : Ø 8 mm, length: 35 mm Base: 100 x 125 mm groove: 16 x 4 mm through bore: Ø 13 mm used, tested ! Dimensions: 190 x 180 x 130 mm

Face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW, face driver -Type: MS5 -Forehead dimension: Ø 63 mm -Recording: see photos -Dimensions total: Ø 80 x 235 mm -Weight: 3.5 kg

Tapping WMW, ABW GB2 Thread size: M5 - M16 Mounting: MK 2 Collets: 4 pieces made of plastic used, checked, with documents ! Dimensions ( tapping device ): 205 x 63 x 63 mm Dimensions ( packaging ): 217 x 94 x 75 mm

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW, tapping chuck holder MK2 -Type: A2 MK2 -Bore: Ø 13 mm -Dimensions: Ø 70 x 267 mm -Weight: 3.3 kg

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW, tapping chuck holder MK2 -Type: A2 MK2 -Bore: Ø 12 mm -Dimensions: Ø 70 x 267 mm -Weight: 3.3 kg

Grinding lenght 6000 mm Grinding diameter 1050 mm

frequency: 50 Hz voltage: 380 V : 220 V connected load: 2,6 kVA rated current: 6,1 A weight of the machine ca.: 1 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gearwheel Shaping machine WMW Modul ZSTTK 1250x24

max diam 670 , max modul 12

Thread rolling machine, segment thread rolling machine, cold forming machine, knurling machine, thread rolling machine -Manufacturer: WMW thread rolling machine type UPW25X100Rm -Drive: 7.5 kW 955 rpm -Speed: 450 - 2025 rpm -Rolling force continuously adjustable: from 0 to 25 tons -built-in thread roller: pitch 1.5 mm -Dimensions: 1570/1510/H1800 mm -Weight: 3500 kg

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: WMW ABW, rotating center point -Type: ZN 205 -Recording: MK5 -Number: 9x centering tip available -Price per piece -Dimensions: Ø 92 x 270 mm / Ø 92 x 270 mm -Weight: 4.7 kg /pc.

Description: Connected load 8.9 kW , Nominal current of the machine 19.6 A Table dimensions 1900 x 450 mm Approx. Onsite Dimension. (l x w x h): 2,150 x 1,100 x 2,450 mm, weight approx.: 3,000 kg

4-jaw chuck, four-jaw chuck, lathe chuck WMW, ROTO RECORD DH 375 x 4-III TGL30-2332 n: max. 1100 rpm < br /> Outer Ø: 375 mm Centering Ø: 320 mm bolt circle Ø (chuck) : 345 mm bore Ø: 140 mm height with jaws: 137 mm with lathe chuck used, tested ! Dimensions ( lathe chuck ): 375 x 375 x 137 mm

Face plate diameter: 1.250mm Center height above foundation slab: 1,250mm Weight: 19t Power: 55Kw Max. torque on the face plate: 31,500Nm Maximum workpiece mass between centres: 16,000 kg Speed range: 2.24 – 224 rpm

Description: Fabrication number 330290 Diameter of grinding wheel approx. 200 mm Including existing documentation magnetic plate size: 600x205 mm, weight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 1,700 x 1,300 x 1,900 mm

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: WMW ABW, rotating center point -Type: ZN 205 -Recording: MK5 -Dimensions: Ø 180 x 260 mm -Weight: 10.1 kg /pc.

Key data: 850 mm, 270 mm, 355 mm

Table width 315 mm, table length 1250 mm Tool holder SK 50 Speed range 28 - 1400 rpm Feed range 16 - 800 mm/min Travel x=850 mm, y= 270 mm, z=355 mm Connected load 8 kW Incl. Electric clamp horizontal Vertical head in X swivel with manual tightening Dispensing as present, no longer energized