wire drawing used for sale

Description: STOLLBERG S151 AT wire winder no. 103138 Approx. Onsite Dimension. (l x w x h): 2,500 x 950 x 1,800 mm, weight approx.: 1,500 kg

Description: With wire rope, without lever Approx. Onsite Dimension. (l x w x h): 700 x 600 x 400 mm, weight approx.: 30 kg

Wire diameter 8-20 mm, straightener 500-14,000 mm, rotor straightening system, wire diameter change fully automatic, 6 reels 5 ton coils, outlet 14 m

Description: serial number: 13181144, including FRONIUS VR4000 Wire Feeder, FRONIUS FK4000 Cooling Unit and FUMATOR Minivac 250D High-Vacuum Burner Extraction weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm

Description: serial number: 13370233, including FRONIUS VR4000 Wire Feeder, FRONIUS FK4000 Cooling Unit and FUMATOR Minivac 250D High-Vacuum Burner Extraction weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm

Description: serial number: 14201304, including FRONIUS VR4000 Wire Feeder, FRONIUS FK4000 Cooling Unit, FUMATOR Minivac 250D High-Vacuum Burner Extraction and LINCOLN ELECTRIC Invertec PC60 Plasma Cutting System weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm

Description: serial number: 14160267, including FRONIUS VR4000 Wire Feeder, FRONIUS FK4000 Cooling Unit and FUMATOR Minivac 250D High-Vacuum Burner Extraction weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm

Description: serial number: 14071130, including FRONIUS VR4000 Wire Feeder, FRONIUS FK4000 Cooling Unit and FUMATOR Minivac 250D High-Vacuum Burner Extraction weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm

Description: serial number: 13370242, including FRONIUS VR4000 Wire Feeder, FRONIUS FK4000 Cooling Unit and FUMATOR Minivac 250D High-Vacuum Burner Extraction weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm

Description: serial number: 14220063, including FRONIUS VR4000 Wire Feeder, FRONIUS FK4000 Cooling Unit and FUMATOR Minivac 250D High-Vacuum Burner Extraction weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm

Description: serial number: 14261063, including FRONIUS VR4000 Wire Feeder, FRONIUS FK4000 Cooling Unit and FUMATOR Minivac 250D High-Vacuum Burner Extraction weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm

Description: serial number: 13181144, including FRONIUS VR4000 Wire Feeder, FRONIUS FK4000 Cooling Unit and FUMATOR Minivac 250D High-Vacuum Burner Extraction weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm

Description: serial number: 14071134, including FRONIUS VR4000 Wire Feeder, FRONIUS FK4000 Cooling Unit and FUMATOR Minivac 250D High-Vacuum Burner Extraction weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm

Description: serial number: 15071761, including FRONIUS VR4000 Wire Feeder, FRONIUS FK4000 Cooling Unit and FUMATOR Minivac 250D High-Vacuum Burner Extraction weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm

Description: serial number: 13370217, including FRONIUS VR4000 Wire Feeder, FRONIUS FK4000 Cooling Unit and FUMATOR Minivac 250D High-Vacuum Burner Extraction weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm

Description: serial number: 13370227, including FRONIUS VR4000 Wire Feeder, FRONIUS FK4000 Cooling Unit and FUMATOR Minivac 250D High-Vacuum Burner Extraction weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm

Description: serial number: 14160273, including FRONIUS VR4000 Wire Feeder, FRONIUS FK4000 Cooling Unit and FUMATOR Minivac 250D High-Vacuum Burner Extraction weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm

Description: serial number: 15071760, including FRONIUS VR4000 Wire Feeder, FRONIUS FK4000 Cooling Unit and FUMATOR Minivac 250D High-Vacuum Burner Extraction weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm

Description: serial number: 18292398, including FRONIUS VR4000 Wire Feeder, FRONIUS FK4000 Cooling Unit and FUMATOR Minivac 250D High-Vacuum Burner Extraction weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm

Description: serial number: 17231616, including FRONIUS VR4000 Wire Feeder, FRONIUS FK4000 Cooling Unit and FUMATOR Minivac 250D High-Vacuum Burner Extraction weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm

Description: serial number: 13491504, including FRONIUS VR4000 Wire Feeder, FRONIUS FK4000 Cooling Unit and FUMATOR Minivac 250D High-Vacuum Burner Extraction weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm

Description: including FRONIUS VR4000 Wire Feeder, FRONIUS FK4000 Cooling Unit and FUMATOR Minivac 250D High-Vacuum Burner Extraction weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm

Description: including FRONIUS VR4000 Wire Feeder, FRONIUS FK4000 Cooling Unit and FUMATOR Minivac 250D High-Vacuum Burner Extraction weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm

Description: including FRONIUS VR4000 Wire Feeder, FRONIUS FK4000 Cooling Unit and FUMATOR Minivac 250D High-Vacuum Burner Extraction weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm

Description: including FRONIUS VR4000 Wire Feeder, FRONIUS FK4000 Cooling Unit and FUMATOR Minivac 250D High-Vacuum Burner Extraction weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm

Description: including FRONIUS VR4000 Wire Feeder, FRONIUS FK4000 Cooling Unit and FUMATOR Minivac 250D High-Vacuum Burner Extraction weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm

Description: including FRONIUS VR4000 Wire Feeder, FRONIUS FK4000 Cooling Unit and FUMATOR Minivac 250D High-Vacuum Burner Extraction weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm

Description: including FRONIUS VR4000 Wire Feeder, FRONIUS FK4000 Cooling Unit and FUMATOR Minivac 250D High-Vacuum Burner Extraction weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm

Description: Stroke X-Y-Z: 450 x 320 x 175 mm stroke axis U and V: ± 50 mm min displacement: 1 [µm] max displacement speed: 0,015 m/s piece maxi height: 200 mm piece maxi weight: 800 kg piece maxi dimensions: 1 100 x 760 mm clearance angle: 0° - 30 z-motion: 175 mm, x-motion: 450 mm, y-motion: 320 mm, weight approx.: 3,200 kg, Approx. Onsite Dimension. (l x w x h): 2,400 x 2,100 x 2,400 mm

Wire EDM machine charmilles 510 Location: Spain Year of manufacture: 1999 Machine Machine bedplate: polymer concrete Dimensions: 2100 x 2050 x 2230 mm Weight: 3800 kg Access door dimensions: 1220 mm Work piece Maximum work piece dimensions: 1200 x 700 mm Maximum work piece height: 400 mm Maximum load: 1000 kg Travel X axis: 700 mm Y axis: 400 mm Z-axis: 400 mm U-axis: 700 mm V-axis: 400 mm Measuring resolution: 0.5 μm Maximum manual speed: 15 mm/s price: interested parties only

Cutting table for 36 NF stones. There is equipment for formats 1.4 and 2.1. The cutter only in use for 5 months

Description: Welding equipment with wire feeder Serial number P734221 Utilisation factor at 35%: 350 A Utilisation factor at 60%: 270 A Utilisation factor at 100%: 210 A Current regulation range: 35-350 A Wire feeder. Model DV4.1, serial number P791602 Three-phase connection With wheels for easy transport weight approx.: 170 kg, Approx. Onsite Dimension. (l x w x h): 510 x 1,000 x 1,300 mm

Description: Welding equipment with wire feeder Serial number P747858 Utilisation factor at 35%: 350 A , Utilisation factor at 60%: 270 A , Utilisation factor at 100%: 210 A , Current regulation range: 35-350 A , Model DV4.1, serial number P791602 Three-phase connection , With wheels ,for easy transport weight approx.: 170 kg, Approx. Onsite Dimension. (l x w x h): 510 x 1,000 x 1,300 mm

Description: Serial Number:55DR1663 Max. Workpiece dimensions: 800x600x215 mm Max. Workpiece weight: 500 kg Table dimensions: 640 x 540 mm Travels: X-axis: 400 mm Y-axis: 300 mm Z-axis: 220 mm Table rapid traverse rate: 1300 mm/min Wire diameter: 0,1 to 0,3 mm Max. Wire feed speed: 23 m/min Wire tension: 0,5 to 25 n Taper: OPTOLinear T/C device Taper angle: 15º (with 200mm plate thickness) Working Hours 24073 Dielectric Fluid Reservoir: Working tank volume: 550 litres Filtration flow rate: 50 l/min Water purifier: 10 litres Other features: Superfinishing Rugosity less than Ra 0.2 weight approx.: 2,980 kg, Approx. Onsite Dimension. (l x w x h): 1,910 x 2,702 x 2,015 mm

Description: Machine consisting of a pair of tensioners Pickup of goods only by tractor truck (with maximum 7-meter box/trailer) or van. No semi-trailer trucks (with skip more than 7 meters)are allowed. Approx. Onsite Dimension. (l x w x h): 400 x 1,200 x 800 mm, weight approx.: 20 kg

Illig deep drawing machine Type: UA 150, 14.500 h Runhour! Built: 1986 Closing unit Plate size: 1000 x 1500 Other max. plate size: 1000 x 1500 max. moulding area: 950 x 1450 max. Drawing depth: 600 UA 150 has upper heating small spotlight with 4 position circuit with separate control cabinet underheating has total field control, flat-fitting chip frame autom. Upper stamping system Normal construction with 2 downhill control film throughhang control Protective grille by hand 4 compartment cooling fan + 4 compartment spray nozzle cooling pre-blowers + automatic deforming, reduction frame - quick change device electron. Schleicher control in the separate control cabinet 1 clamping frame for max. mold ingescent

currently setup for thermoformed shells for pizza shell outer size 280 mm, inlay inside 230 mm, depth 20 mm shells useful also for flame cakes, crepes and similar products with gassing dimensions abt. 4.000 x 1.000 x 1900 mm overhauled 2012

Multivac R 530, rigid films + soft film, film width 420 mm, trigger 560 mm 2.3, MAP fumigation, long loading, jumbo roll holder for film, double film holder for top film, printing mark control, 3 x cross cutting for soft slide, 3 x hard foil stamping

Railway film 420 mm Preferential 600mm Fresh meat machine

Printing capacity max. 300 t, table 1500 x 1000 mm, stroke max. 500 mm

Blister thermoforing machine for PET for olive oil, jam, chocolate cream. Thermoforming machine for Minidose. Up to 12.000 pcs per hour. Spanish production. Best components as Panasonic, Omron, Datalogic, etc. BP Machinery, experience from 10 years ago. More information please contact.,

Drawing blades serve as tools for the fine removal of chips, for removing old paint layers and for cleaning contaminated surfaces. Pull blades are usually not functional when purchased, but only a piece of steel sheet. In order to function, a fine ridge must first be sanded. We offer fully functional drawing blades of 0.4 mm and 0.5 mm Swedish steel for new purchases. If necessary, we will gladly grind your "used" or "new" drawing blades and let them come back to you functionally. Contact us. We would be happy to provide you with a new range of re-energised blades - ground or unground and/or a grinding offer. We would be happy to provide you with further information regarding drawing blades.

pressure:1000 t stroke:800 mm total power requirement:45 kW weight of the machine ca.:97 t dimensions of the machine ca.:4500 x 4400 x 5300 m Return Capacity:40 t Main Cylinder:(d=500mm) 2 Stück :(140 x 80mm) 2 Stück speed of forward flow:40 - 110 mm/sec Return Speed:150 mm/sec Press speed (infinitely variable via PLC):3 - 12 mm/s Table size:3000 x 2300 x 200 mm Ram plate:3000 x 2300 x 1000 mm demand for oil:ca. 1300 l :210 l/min :600 sec :1500 x 150 mm Hydraulic and mechanical protection of the plunger Two-piece auxiliary motors with 2.2 kw Two-piece auxiliary pumps with a power of 6 L/min. Concurrency monitoring (0.5 mm/m²) Fast forward speed adjustable via plc Maximum deflection of the table at 0, 07mm/m²

pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t dimensions of the machine ca.:4000x2600x5000 m draw back pressure:20 t Master cylinder:1 Stück voltage:400 V frequency:50 Hz :24 V :BOSCH/REXROTH dayligth:800 mm :1200x1000 mit T-Nuten nach Kundenwunsch DIN 650-22 mm work height max.:1100 mm pre-running speed:170 mm/sec return speed:150 mm/sec Speed printing phase:15 mm/sek. Hydraulic block:REXROTH demand for oil:500 l pressure control:über PLC (Mindestdruck 20t) Oil Cooling:elektrisch :220 (im Schaltschrank) V memory:200 Programme :über Monitor von 20-200 t Controll:Zweihandbedienung beweglich :2-10 mm/sec :0-10 sec

pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :600 mm Ram plate:700 x 600 mm table height over floor:850 mm Table size:700 x 600 mm speed of forward flow:10 mm/sec Pressing speed:10 mm/sec :10 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,2 t dimensions:950 x 2440 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück heating plates :550 x 500 mm :6800 ? :2400 ? :1200 ? :1200 ?

pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :550 mm Ram plate:700 x 600 mm table height over floor:900 mm Table size:700 x 600 mm speed of forward flow:50 mm/sec Pressing speed:10 mm/sec :50 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,3 t dimensions:1150 x 2600 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück Heating panels (L x B) with 2 measuring sensors diagonally:550 x 500 mm Siemens Control System:S7 1200 Monitor:12 Zoll :2400 ? :1200 ? :1200 ?

pressure:100 t distance between columns:1000 mm stroke:500 mm Return Capacity:10 t Engine Output:10 kW :700 mm Ram plate:1000 x 700 mm table height over floor:1000 mm Table size:1000 x 700 mm speed of forward flow:10 mm/sec Pressing speed:10 mm/sec Return Speed:25 mm/sec :10 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:6 t dimensions:3100 x 1000 x 2900 m

pressure:300 t distance between columns:1900 mm stroke:600 mm total power requirement:30 kW weight of the machine ca.:27 t dimensions of the machine ca.:2900 x 3500 x 5400 mm Return Capacity:40 t Main Cylinder:Ø 370 x 350 mm :2 Stk. Ø 80 x 50 mm speed of forward flow:150 mm/sec Return Speed:150 mm/sec Table size:1800 x 1800 x 150 mm Ram plate:1800 x 1800 mm demand for oil:ca. 700 l :max. 900 sec Daylight Opening:900 mm pressure speed:15-8 mm/sec auxiliary motor:5,5 + 2,2 kw auxiliary pump:22 + 5,5 cc Lineal mess stab NOVOTECHNIK:650 mm Table height above ground level (approx.):1000 mm Light sensors front and rear of SICK:900 + 150 mm Monitor:12 Zoll Hydraulic and mechanical protection of the plunger Two-piece auxiliary motors with 2.2 kw Two-piece auxiliary pumps with a power of 6 L/min. Concurrency monitoring (0.5 mm/m²) Fast forward speed adjustable via plc Maximum deflection of the ...

pressure:400 t distance between columns:2300 mm stroke:600 mm total power requirement:37 kW weight of the machine ca.:25 t dimensions of the machine ca.:3300 x 2800 x 5200 mm Main Cylinder:Ø 440 mm :2 Stk. Ø 100 x 60 mm speed of forward flow:200 mm/sec Return Speed:200 mm/sec Table size:2200 x 1400 x 150 mm Ram plate:2200 x 1400 mm demand for oil:ca. 900 l :max. 600 sec Daylight Opening:900 mm pressure speed:15-8 mm/sec auxiliary motor:5,5 + 2,2 kw auxiliary pump:22 + 5,5 cc Lineal mess stab NOVOTECHNIK:650 mm Table height above ground level (approx.):1000 mm Light sensors front and rear of SICK:900 + 150 mm Monitor:12 Zoll Hydraulic and mechanical protection of the plunger Two-piece auxiliary motors with 2.2 kw Two-piece auxiliary pumps with a power of 6 L/min. Concurrency monitoring (0.5 mm/m²) Fast forward speed adjustable via plc Maximum deflection of the table at 0, 07mm/m²