welding tig used for sale

table diameter: 1300 mm table load: 3 t swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min : 6000 Nm 0: 1,1 / 1,1 kW welding current: 700 Ampere • Self-locking gear, therefore no forward and backward at eccentric load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1200 mm table load: 3 t swivelling range: 0 - 135 Grad turning speeds: 0,07- 0,7 U/min table height adjustment: von 980 bis 1750 mm max. torque on the faceplate: 4500 Nm welding current: 700 Ampere including remote control and welding current transmission. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1100 mm table load: 2000 Kg swivelling range: 0 - 135 Grad turning speeds: 0,1 - 1,0 U/min height adjustment: 1100 - 1550 mm max. torque on the faceplate: 4000 Nm engine output: 1,1 / 0,75 kW welding current: 500 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Earth cable for inert gas device, electrode device -Length: 8 m -Dinse connector -With: gas hose -Weight: 24 kg

Earth cable for inert gas device, electrode device -Length: 5 m -Dinse connector -With: gas hose -Weight: 11 kg

Earth cable for inert gas device, electrode device -Length: 2 m -Dinse connector -With: gas hose -Weight: 5 kg

table diameter: 300 mm table load: 50 Kg swivelling range: 90 Grad turning speeds: 1 - 12 stufenlos U/min table load capacity: 50 kg vertikal total power requirement: 220 kW weight of the machine ca.: 0,036 t dimensions of the machine ca.: 0,45 x 0,43 x 0,38 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Earth cable for inert gas device, electrode device -Length: 30 m -Dinse connector -With: gas hose -Weight: 68 kg

Earth cable for inert gas device, electrode device -Length: 13 m -Dinse connector -With: gas hose -Weight: 28 kg

Earth cable for inert gas device, electrode device -Length: 33 m -Dinse connector -With: gas hose -Weight: 72 kg

Earth cable for inert gas device, electrode device -Length: 27 m -Dinse connector -With: gas hose -Weight: 64 kg

- Compressed air: 6 bar - Transport speed: 3 - 30 m/min - Welded frame dimensions (LxW): 580 x 440 mm - Film core diameter: 76 mm - Max. film roll diameter: 300 mm - Max. product height: 180 mm - Film thickness: 7 to 60 mμ - Max. foil width: 550 mm - Cycle rate: 40 cycles/min - Total power: 3.7 kW - Machine weight: 560 kg - Space requirements (W x D x H): 2.05 x 1.72 x 1.48 m - Condition: good Details Angle welding machine fully automatic, permanently heated welding knife, DELTA color touch screen, horizontal and vertical photocells, film material polyolefin fine shrink films, PVC, PLA and other bio-films, with labeler / barcode printer SATO M8485Se Accessories no other accessories, documentation

table diameter: 450 mm table load: 300 Kg swivelling range: 90 Grad turning speeds: 0,2 - 2 stufenlos U/min table load capacity: 300 kg vertikal total power requirement: 220 kW weight of the machine ca.: 0,078 t dimensions of the machine ca.: 0,66 x 0,45 x 0,48 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1400 mm table load: 4 t swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min : 8000 Nm 0: 1,1 / 1,5 kW welding current: 700 Ampere • Self-locking gear, therefore no forward and backward at eccentric load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 2000 mm table load: 10000 Kg swivelling range: 0 - 130 Grad turning speeds: 0,02 - 0,2 U/min height adjustment: 1450 - 2200 mm max. torque on the faceplate: 20000 Nm engine output: 1,5 / 2,0 kW welding current: 1000 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 2000 mm table load: 10,0 t swivelling range: 0 - 135 Grad turning speeds: 0,05 - 0,5 U/min max. torque on the faceplate: 20000 Nm table pass: 200 mm welding current: 1000 Ampere total power requirement: 3,0 + 4,0 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Projection welding machine for sale. The welding machine has been completely renovated. All elements are either regenerated or replaced with new ones. Modern Aspa ASM-713 controller installed. We have complete documentation for the machine.

Seam welding machine, longitudinal and /or transversal seam, Two spare arms with supports incl., Power switch incl. Capacity 3+3mm Water cooled

table length: 400 mm table width: 400 mm table load: 0,2 t table diameter: 400 mm swivelling range: 90 Grad turning speeds: 0,2 - 2 stufenlos U/min table load capacity: 100 kg. vertikal total power requirement: 220 kW weight of the machine ca.: 0,065 t dimensions of the machine ca.: 0,56 x 0,42 x 0,46 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping range of chuck: 10 - 200 mm height: 67,5 mm daylight: 65 mm external diameter: Futter 200 mm external diameter: Spannhebel 360 mm weight: 4 kg Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1300 mm table load: 3000 Kg swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min height adjustment: 1200 - 1800 mm max. torque on the faceplate: 6000 Nm engine output: 1,1 / 1,1 kW welding current: 700 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1600 mm table load: 8 t swivelling range: 0 - 130 Grad turning speeds: 0,05- 0,5 U/min table height adjustment: von 1210 bis 2238 mm max. torque on the faceplate: 1200 Nm welding current: 700 Ampere including remote control and welding current transmission. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rofin SW Tool Open II 150 W Welding Machine power 150 W year 2010

Migatronic Sigma300 welding machine, purchased for single job and never used again, perfect and functioning in all its parts double torch MMA kit, spare rollers all diameters, for sale due to inactivity

SAF set for sale for automatic submerged arc welding of plate girders or pipes 1. Pole mount with two heads, SAF 2. Power sources 2x1000A 3. Hydraulic station for welding plate girders, 15 m long 4. Rotator for welding pipes 4t

Semiautomatic welding machine for pipes TiG OERLIKON in a complete set with: - OERLIKON CITOTIG DTW 255 welding machine -electrical cabinet -console -swivel - the maximum working area is 2m The semi-automatic machine is used for welding pipes with the TiG method. Technical condition - good

table length: 1200 mm table width: 1200 mm table height: 850 mm Vertikal stroke: 40 mm weight of the machine ca.: 0,261 t dimensions: 1,2 x 1,2 x 0,85 m Welding table SIEGMUND Professional 750 + plasma nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 11.5 - 13.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, parallel hole arrangement in a 25 mm grid on the sides. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mm table width: 1000 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 0,73 t dimensions: 2,0 x 1,0 x 0,9 m Welding table SIGMUND Professional 750 + Plasma-nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 800 mm table height: 900 mm table load: 2000 Kg weight of the machine ca.: 0,24 t dimensions: 1,0 x 1,0 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 2500 mm table load: 20,0 t swivelling range: 0 - 135 Grad turning speeds: 0,04 - 0,4 U/min max. torque on the faceplate: 40000 Nm table pass: 200 mm welding current: 1000 Ampere total power requirement: 5,5 + 11,0 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Name MC5H90300 Spot welding machine Product number 821740 Manufacturer unknown Model / type MC5H90300

Technical details Approximate dimensions 1,200 x 1,200 x 2,000 mm Approximate weight 600 kg Item description serial number: 48913771 max. welding power: 154 kVA cooling water flow: 8 l/min.

Alpha AL 150 laser welding machine Machine is in good working condition Wattage 150 w

table load: 150 kg weight of the machine ca.: 250 kg dimensions of the machine ca.: 800 x 700 x 950 mm Exhibit Machine Producer: BENDMAK Type: SRP 015 Load capacity: 150 kg Load center: 100 mm Eccentricity: 100 mm Rotation of the turntable: 360° Strongest inclination: 90° Input Power: 380 V Rotary motor: 0,18 kW tilt motor: 0,25 kW Speed: 1,4 m/min Slew: 30 sek. Table-Ø: 500 mm T-Slots: 5-72 Height in horizontal rotation: 700 mm Dimensions: Height: 950 mm Length: 800 mm Width: 700 mm Weight: ca. 250 kg Earthing: 300 Amp. Additional information: - adjustable speeds - control panel with 5 m cable - digital speed indicator on the control panel for monitoring the rotation - weld grounding mechanism - mechanical angle indicator - engine brake with air cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

wheel diameter: 900 mm depth: 900 mm width: 940 mm height: 1.050 mm Disc-Ø: 900 mm Depth: 900 mm Height: 1.050 mm Width: 940 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lincoln Powertec 425S welding machines Following the closure of our manufacturing plant, we are selling our 5 Lincoln brand welding machines.

table diameter: 1000 mm table load: 6 t swivelling range: n x 360 Grad further details please find in the pdf document attached! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

RS BEFI MIG RS 350 DV welding machine Following the closure of our manufacturing plant, we are parting with our 3 RS BEFI brand welding machines

OR Laser 200 Watt Laser Welding Machine Machine is in good working condition

length: 0 mm height: 0 mm total power requirement: kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: m Ultrasonic Welding Machine for Plastic Articles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

current capacity: 16 kVA throat: . mm contact pressure capacity: . kp total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

floor-plate length: 4500 mm floor-plate width: 1600 mm floor-plate height: 370 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

floor-plate length: 4500 mm floor-plate width: 1600 mm floor-plate height: 380 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

floor-plate length: 4600 mm floor-plate width: 1620 mm floor-plate height: 380 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand welding pipes production line Inlet sheet dimensions: max. 8 x 12 m x 600 mm Outlet pipe dimensions: Dia.: 610 - 2500 mm (could be enlarged) Wall thickness: 40 - 600 mm Length: 12.0 m

Cell with welding laser E-TECH TRUMPF TLF4000 Year of construction: 2005 Laser: TLF 4000 Rok produkcji: 2005 Laser: TLF 4000 Receiving robot : Yaskawa Motoman NX100

Alpha AL 120 Laser Welding Machine Laser Power : 120W Machine is in good working condition

Cell with welding robot (MIG) Motoman YR-MA01400-A00 Cell with welding robot (MIG) Yaskawa - Year of construction: 2010 - 6-schsen robot Motoman YR-MA01400-A00, - Source: Motoweld EL350 III - Positioner Yaskawa 2 pcs.. - Dimensions of the cell: 3300 mm x 3000 mm x 2400 mm - Control Motoman DX 100 - Weight: 2.5 t

Sisma SWA 300 Welding Machine 300 W Spare lamps are included Machine is in good working condition

Manufacturer: Scansonic Type: AL01 Condition: refurbished, since then unused and professionally stored in the manufacturer's suitcase Wavelengths: 900 ... 1030 nm; 1064 nm, 1080 nm to 4 kW Illustrations: 2.0:1 - 2.5:1 - 3.2:1 - 4.0:1 - 5.3:1 Fiber plug: Trumpf B or Type D (LLK Auto) Laser: CW laser up to 4 kW Working range height (Z): ± 5 mm Robot adaptation: any Repaired/replaced: - Lens - Compression spring - Protective spring - Cover - Beam aperture - Shaft spring - Fiber coupling firing In addition, the device was cleaned, adjusted and force-normalized.