water used for sale

Water meter, domestic water meter, with protective filter ZENNER MTWI-N ZR 11648404 Qn: 10 m3/ Nominal pressure: 16 bar Pulse generator: 10 litres / Pulse Connection thread: G1 1/2 ( inch ) Installation dimensions: 710 mm Protective filter: DUCOFILT 94 Mint ! Dimensions: 710 x 200 x 310 mm

Water meter, with contactor ELSTER MNR-K PN10 DN20 30°C Qn: 2.5 m3/h Connections ( water meter ): 1 ( inch ) Installation dimension: 190 mm used, repaired ! Dimensions: 190 x 96 x 145 mm

Special water bath, laboratory water bath DINKELBERG ATH 232319 Year: 2004 10 liters ambient temp. +5° to +80°C Housing: Polypropylene with heater / heating element 230 V 800 W Dimensions: 420 x 250 x 360 mm

Pressure reducer, pressure regulating valve, for domestic water, with strainer HONEYWELL BRAUKMANN D 06 F ( D06F ) 1/2- DVGW 0432 Installation dimensions: 80 mm Water connections: R1/2 housing material: brass New, with documents ! Dimensions ( pressure minder ): 80 x 64 x 150 mm

Pressure reducer, pressure regulating valve, for domestic water, with strainer, 2 pieces KEMPER Figure 710 0G 7100G01500 < br />DVGW P-IX 7898/I DN15 Installation dimensions: 90 mm Water connections: G3/4 Brass New ! Dimensions ( pressure reminder ): 175 x 90 x 80 mm Dimensions ( packaging ): 180 x 175 x 80 mm

Pressure reducer, pressure regulating valve, for domestic water HONEYWELL BRAUKMANN D 06 F ( D06F ) DN 15 / PN 25 installation dimensions: 80 mm ( pressure reducer ) / 205 mm ( with connections ) water connections: R1/2 housing material: brass New ! Dimensions: 230 x 205 x 110 mm

Pressure reducer, pressure regulating valve, for domestic water HONEYWELL D06FN-1/2B DN 15 PN 25 Installation dimensions: 80 mm Water connections: R1/2 inch housing material: brass New, with documents ! Dimensions ( pressure reminder ): 205 x 80 x 70 mm Dimensions ( packaging ): 215 x 115 x 80 mm

Pressure reducer, pressure regulating valve, for domestic water, with strainer PAGUS 1/2 inch set pressure: 4 bar installation dimension: 125 mm water connections: 1/2 ( inch ) thread: 3/4 ( inch ) housing material: brass new, with documents ! Dimensions: 150 x 125 x 70 mm

Dirty water pump, submersible pump, water pump, centrifugal pump BEKA, PUMPENWERK TAUCHA Type: KRX 10 - 32 Capacity: max. 10 m3/h Drive power: max. 0,0,75 kW speed: max. 2800 rpm impeller diameter: Ø 105 mm Immersion depth: max. 1000 mm motor: BBC QUx 80MB4 0.55 kW 1400 rpm 220 / 380 V 3AC 50 Hz IP33 used, tested ! Dimensions 1350 x 250 x 200 mm

BBA BV-150 dry self-priming pump, This BV series pump is designed with an emphasis on reliability and durability. Thanks to its fully mechanical vacuum system, these pumps prime quickly, even without liquid in the pump housing. Due to its heavy construction, this pump from the BV series is ideal for use in vertical and horizontal drilling techniques., World-class performance this pump from the BV series is used for the most demanding bentonite and sludge applications. A robust overall design ensures maximum performance of this pump., This pump is equipped with a soft starter. This motor control, ensures a smooth start with constant acceleration, lowers, the inrush current and prevents unnecessary mechanical stress, on the pump. Another advantage is linear stopping with this, prevent pump damage due to water hammer, , Pump Specifications:, Type...BV150 D285, Max. capacity.430 m3, /oclock, ...

Longer & Rich Water Chiller LR 7.4584.2.00 Free-standing cooler for cooling large diesel engines for generator sets, emergency generators and pump units max 95 °C bar: 1.5 Water: 65 l WxHxD= 135x130x140cm More items new and used - you can find them in our shop! International shipping costs on request!

Oil/water separator, oil-water separation system -Dimensions: 660/260/H700 mm -Weight: 18 kg

Cold water set, cooling water circuit, heat exchanger, cooling for spot welding device, spot welding machine, spot welding system, spot welding tongs -Chiller: complete refrigeration unit -Compressor: Danfoss type: MTZ22JC4A -Pump: Lowara type CEA70/5 0.55 kW -Total dimensions: 740/710/H930 mm -Weight: 196 kg

Chiller, cooling water circuit, heat exchanger, cooling for spot welding equipment, spot welding machine, spot welding system, spot welding gun -mobile version: -Connection: 1/2 inch -Cooling unit output: 0.33 kW -Water volume flow: 500 l / h -Dimensions: 895/600 / H1020 mm -Weight: 156 kg

This Impulse IP-175 AbuDhabi piston pump is designed for vertical and horizontal dewatering. These positive displacement pumps are self-priming and extremely suitable for unlimited pumping of a mixture of water and air. Moreover, this pump can run dry without any worries, without causing damage or wear to parts., , Can be supplied with any desired coupling/connection., , 82 m3 per hour, MAX: 22 MWK, , Several pieces in stock, , Throughput capacity: 82 m3/h, Motor brand: Hatz, Max. head: 22 MWK, Weight: 1950 kg, , = More information =, , Year of manufacture: 2023, Applicable material: Water, Empty weight: 1.950 kg, Connector size: 4 Cardan, Cargo space capacity: 1.585 l, Quick coupler system: Yes, Technical condition: very good, Visual appearance: very good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more informat ...

Grundfos Water Pump CRN10-02 with Control Pump from 2022, as good as new, complete with control system, 1 available. 0.75 KW, 10 m3/h, 25 bar Manufacturer: Grundfos Model No.: CRN10-02 A-FGJ-G-E-HQQE Serial number: 0001 Type: Water Pump with Control Power [kW]: 0.75 Flow rate [m3/h]: 10 Pressure max [bar]: 25 Pumping height [m] 15 Operating hours [h]: only a few Year of construction: 2022 Weight [kg]: 40

Grundfos Water Pump CRN3-23 Pump from 2022, as good as new, complete 2 available. 2.2 KW, 3 m3/h, 25 bar Manufacturer: Grundfos Model No.: CRN3-23 A-P-G-E-HQQE Serial Number: 0003 / 0004 Type: Water Pump with Control Power [kW]: 2.2 Flow rate [m3/h]: 3 Pressure max [bar]: 25 Pumping height [m] 113 Operating hours [h]: only a few Year of construction: 2022 Weight [kg]: 40

KSB Water Pump Movitec VF 10/11 -L B Pump from 2022, as good as new, complete 2 available. 4 KW, 10 m3/h, 89 m Manufacturer: KSB Model: Movitec VF 10/11-L B Serial Number: 1750863-1 Type: Water Pump Power [kW]: 4 Flow rate [m3/h]: 10 Operating hours [h]: only a few Year of construction: 2022 Weight [kg]: 70

WaterJet MicroStep Aqua Cut 3001.20 was built in 2005. The waterjet cutting machine allows you to cut sheet metal with a maximum thickness of 120 mm on a table size (L x W) 3300 x 2200 mm. The machine portal is equipped with two heads for water cutting, one of which is rotating. The waterjet is controlled by the MSNC 500 CNC controller. The MICROSTEP Aqua Cut 3001.20 WWr + 4001.20P water cutter is offered with extensive equipment, including: Streamline SL-V 50S Plus oil cooler, ATLAS COPCO FX1 dryer and KKT KRAUS OLB7 cooling unit. The plasma source and the additional head also enable plasma cutting after installing an additional table.

For sale a little used machine designed for cutting metal, sheet metal, stone by pressurized water. numerically controlled (CNC) Producer: KIMLA MOTOR HOUR COUNTER ONLY - 3,046.7 Year of construction: 2015 Technical specifications: Working range: 2050 x 6050 mm Cutting thickness: up to 200 mm Pump: HYPERTHERM HIPRECYZJA 75S • 56 kW pump power by ACCUSTREAM - USA • Maximum pump pressure 4150 bar • Pump expansion system reducing pressure during the journey and after turning off the pump • Cutting head drive AC servo drives with digital encoders. • Two-sided Y axis drive, One-sided X and Z axis drives • Maximum travel speeds: X, Y, Z axis - 20m / min • The range of motion in the Z axis - 200 mm • Permissible table load 15 kN / m2 • Galvanized bathtub • Material supporting truss made of galvanized steel • Opera ...

CMS EASYLNE 2040 is a high-performance, versatile, easy to use and competitively priced water jet cutting system - either pure water or abrasive waterjet cutting – which can be used for a wide variety of applications for the most diverse production demands in different application fields, delivering highly accurate cuts even in 3D. AXES MOTION X (4000 mm): longitudinal motion – back and forward Y (2000 mm): The cutting head cross motion – left and right Z (220 mm 3 axis head – 150 mm 5 axis head): vertical motion of the cutting head

Ice water system Model DKS 150 Capacity approx. 40 to 150 litres/h Refrigerant R 290 Voltage: 230V; 50Hz Water connection: 3/4" Dimensions L x W x H mm: 540 x 500 x 880 Weight empty approx.: 71 kg Used appliance as good as new with 6 months warranty Option: Underframe Wall bracket More bakery machines in stock

Containerrised water treatment installation . consisting of three 20 FT offshore containers build onder DNV One for the power supply with a Scania engine type DI 16 55 M 532 KW 1800 rpm connected with a Leroy Somer generator type M 47.2L9C6S4 including switchboard with circuit breaker and fuel tank . Two containers with the Hatenboer water treatment installation capacity 200 M/ day photo's from the installation available . infoperfectmachinery.nl or +31 78 6158040 Whatsapp +31 6 53549259

BBA BA200K D300 , , - Machine is unused, -Equipped with floats for automatic switching, - Suction : DN250, -Press : DN300, , MAX capacity : 640m3/h, MAX head : 32 MWC, MAX free passage : 105mm, , for and by: sewage, dredging and shipping, rental companies, seawater, chemical industry, calamities and civil engineering., , Throughput capacity: 640 m3/h, Max dirt passage: 105 mm, Motor brand: Deutz, Max. head: 33 MWK, Max dirt passag: 1800 rpm, Weight: 2650 kg, , = More information =, , Year of manufacture: 2018, Applicable material: Water, Empty weight: 2.500 kg, Height: 140 cm, Cargo space capacity: 10.668 l, Technical condition: very good, Visual appearance: very good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Aroused your interest? . The sales team will be happy to  ...

Glycol cooler, water cooler, water evaporator, Küba SGB 132, 70 liter capacity, two fans 710mm diameter, 920 red/min. 2.2 Kw. From a Fruit Warehouse, CA Warehouse In very good condition and fully functional. Fan very robust, south electric, 2.2Kw.

- Fully automatic water bottling line, from blowing to shrink/unit pack formation, and palletizing. (Bottle preform in - at the end the finished pallet is foiled out - this is how it works simplified) Currently: 2 liter PET, carbonated and still mineral water. (Possible upgrade to 0.5, 1.5 liter etc.) In the case of a 2-liter product: nominal capacity 8,500 bottles/hour (Productivity is proportionally higher in the case of a smaller volume) The power of the machine line can be further increased (the machine with the lowest power determines the maximum power of the line) - nominal capacity 8,500 b/h / 2L (b/h = bottle/hour) - compressor: Kaeser G1400 40 Bar - blower: Siedel SB016 No109: 17,500 b/h - air conveyor: Laffranchi - conveyor and buffer track - filling machine: Sarcmi RG8 202 1510/84 Selenia 70/8 02.076: 12,000 b/h - labeller: Sacmi Opera Ser.no: 10116262: 22,000  ...

Water distillation plant for WFI water Manufacturer : Kemiterm Type: 1000MS-6 Technical data : low pressure 5/3 bar high pressure 8/5 bar Temperature 100 °C / 85 °C GMP Distillation capacity up to 2200 l/h Documents: available

BBA BA100K D193, This diesel-driven 4 waste water pump is the best performing mobile pump set in its class. With a dirt passage of 82 mm, the chance of blockage is zero, even on the most polluted sewer jobs., The economical 1-cylinder Hatz diesel engine with DriveOn® technology guarantees minimal fuel consumption and long maintenance intervals., , Maximum 135 m3/h and head up to 17 mwk, Dirt passage 82 mm, , Can be supplied with any desired coupling/connection., , Throughput capacity: 135 m3/h, Max dirt passage: 82 mm, Motor brand: Hatz, Max. head: 17 MWK, Max dirt passag: 1500 rpm, Weight: 1300 kg, , = More information =, , General information, Year of manufacture: 2014, Applicable material: Water, , Weights, Empty weight: 1.300 kg, , Functional, Connector size: 4 Cardan, Cargo space capacity: 2.250 l, Quick coupler system: Yes, , Condition, Technical condition: good, Visual appearance ...

New and unused Caffini Libellula 1-3 LB80 self-priming diaphragm pump. These slop pumps have been used since 1968. This successful pump type, also called cats head in practice, has remained virtually unchanged since that time. The pumps are suitable as a slurry pump or for small dewatering. This caffini libellula diaphragm pump is equipped with a Hatz diesel engine mounted in a mobile frame. Can be supplied with any desired coupling/connection. Max: 20 m³ per hour Max: 15 mWK 4 pcs. in stock If you have any questions, you can of course always contact us., , Throughput capacity: 20 m3/h, Max dirt passage: 50 mm, Motor brand: Hatz, Max. head: 15 MWK, Weight: 150 kg, , = More information =, , Year of manufacture: 2024, Colour: Blue, Applicable material: Water, Empty weight: 150 kg, Cargo space capacity: 335 l, Technical condition: very good, Visual appearance: very good, Damages: none, P ...

Water mixing / dosing unit Werner &, Pfleiderer WMD 152Product descriptionManufacturer: Werner &, PfleidererType: WMD 152Condition: used, functional, baker conditionfor water volume and temperature control unitCurrent type: 1/N / 50 HzNominal voltage: 230 VNenn operating current: 0.5 ADedetails see pictures

manufacturer: GMM model: INTEC I 713 G-2 Year of construction: 2021 condition: as good as new (used) Operating hours: 450 h Repeat accuracy: 1 mm Working range: 4,500 mm Traverse path X-axis: 4,200 mm Traverse path Y-axis: 1,500 mm Z-axis travel: 200 mm Positioning accuracy: 1 mm Workpiece weight (max.): 2,000 kg Type of input current: three-phase Motor power: 35.000 W Input voltage: 380 V Aluminium sheet thickness (max.):120 mm Table length: 4,200 mm Table width: 2,500 mm Tank capacity: 5.000 l Pressure 4.55 bar Positioning speed: 102 mm/min Rapid traverse X-axis: 12,500 mm/min Rapid traverse Y-axis: 12,500 mm/min Rapid traverse Z-axis: 2,000 mm/min Table height: 860 mm Operating pressure: 4,550 bar Input current: 60 A Table load: 2,000 kg Accuracy travel dimension: 1 mm Year of last overhaul: 2024 Total height: 3,500 cm Total length: 5,800 cm Overall w ...

BBA 4 inch Dirty water pump , vacuum pump supported , self-priming., , Throughput capacity: 140 m3/h, Max dirt passage: 82 mm, Motor brand: HATZ 1D81z, Max. head: 17 MWK, Max dirt passag: 1500 rpm, , = More information =, , Year of manufacture: 2004, Empty weight: 1.100 kg, Connector size: 4 inch, Quick coupler system: Yes, Technical condition: very good, Visual appearance: very good, Damages: none, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses , coupling systems and fittings. A physical visit to our location is very well possible! Make your visit known in advance to avoid ...

Description: The cost-effective and permanently reliable solution to the problem is usually the oil/water separation for dispersed condensates. The purified water fulfils the legal regulations for sewer discharge. Approx. Onsite Dimension. (l x w x h): 590 x 590 x 1,170 mm, weight approx.: 58 kg

Cat.-Nr. 11-370-2 new double jacket and insulated Volume: 2400 Litres - Parts in touch with product in AISI 316 – other parts in AISI 304 without Heating Jacket Material: Parts that come in touch with the product in V4A (AISI 316) – other parts in V2A (AISI 304) Max.Working Pressure. 0,49 bar Surface fully pickled, passivated and neutralised Insulation with Mineral Wool for Hot Water Tanks Thickness = 80 mm Standard Equipment: Manhole on the top Air Release and Pressure Valve in PVC Manhole inside oval 400 x 350 and Manhole outside rectangular for insulation jacket Sample Valve Level Indicator 24 mm Ladder Support Outlet Discharge with Outlet Pipe DN 50 Digital Thermometer Clear Outlet DN 50 Transport Hooks with Insert Heating Element 230/400V, 7,5 kW Diameter: 1350 mm Height: 3130 mm Cyl. Height: 2160 mm F ...

Cat. No. 11-3170 New without heating jacket - round standing on feet Medium-contact parts V4A (AISI 316) with electric screw-in heating 230/400 V, 7.5 kW Standard: Material: medium-contact parts V4A (AISI 316) - otherwise V2A (AISI 304) Operating pressure max 0.49 bar Container completely stained, passivated and neutralized Insulation made of mineral wool for hot water tanks thickness = 80 mm Standard: Manhole top DN 400 Ventilation and vent valve made of PVC Manhole inside oval 440 x 350 and manhole 500 x 430 outside rectangular for insulated container Test tap Stand display 24 mm Ladder bracket Residual drain with forward-drawn outlet pipe DN 50 with disc valve DN 50 with lid Digital thermometers Clear drain DN 50 with disc valve with lid Transport eyelets with electric screw-in heating, 230/400V, 7.5 kW Cat. No. Contents  ...

Water cooler, ruck cooler GEA, 400-600KW.with radial fan, suitable for air duct as heating or to blow into the open.

water cooler, table cooler, recooler make Güntner, approx.1000KW cooling capacity, Device with 12 fans,throughmeser 1000mm. 416 litres capacity. 12000mm length, 2400mm width, 1500mm height, 8 feet, weight 2950KG.

Raw water pump in Exchange

Raw water pump in Exchange

Thermo Haake open water bath circulator. Manufacturer: Thermo Haake ( Germany ) Type: V26 003- 2391 Material: Stainless steel Volume: 19 - 26 liter Power: 230 v. 50/60 Hz, 1.5 kW Bath open dimensions: L 300 mm x W 350 mm x H 200 mm Overall dimensions: L 360 mm x W 750 mm x H 400 mm Very good condition 5 pcs available

New Water trough for Heidelberg KORD 64

HT Water pump,Type WD-90L240 Kolmeks WD90L240 Part number: 191001

High pressure - piston pump Flow water pump Manufacturer: UDOR Type: GAMMA 162 TS 1C. Detailed information on the manufacturers page, see pictures. Condition: Used, fully functional Scope of delivery: see the pictures.

Used approx. 3 m³ / 3,000 litres polyester tank / GRP tank, transportation tank, Staffelstein tank, good condition. Dimensions: H = 2, 00 m (tank) H = 2, 50 m (total) W = 1, 00 m L = 1, 60 m (tank) L = 1, 70 m (total) Overground, upright tank, incl. 4 steel feet/ cones, dome on the front, several in- and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, AHL, ASL, seeping juice, canola oil, or as a rain drip tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personal ...

Water pump MWM 620 RECON Part number: 1230 7597 / 1230 2820 / 1230 3401 / 1507 7822 Type 166R 6.440.0.730.011.7 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

P41 - Used approx. 3m³ / 3,000 litres polyester tank / GRP tank, transportation tank, Rotband tank, good condition. overground tank, lying horizontally, on 2 steel bases Content: ca. 3m³ / 3,000 litres Material: Polyester / GRP Length: ca. 2,59m inside / 2,70m outside Width: ca. 0,98m inside / 1,05m outside Inside height: ca. 1,52m Height incl. base: ca. 1,90m Made by Rotband, a very good quality. Lid on the front, several in- and outlets. The container can be a storage tank for liquid feed, whey, potato steam skins, molasses, water, manure, AHL / ASL, seeping juice, canola oil, or be used as a rain drip tank etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tan ...

Cooling water circulation pump in Exchange

Raw water pump usage in Exchange

Cooling water pump overhauled Alweiler NSG 65

Cooling water circulation pump in Exchange