wartsila gas used for sale

Key data: 6500

Wartsila 18V32LN 6500Kw Year 1999 Running Hours 28K , Power Plant for Sale

Completely overhauled fuel injector, even used ones we have all in stock

Used connecting rods available for immediate delivery.

Key data: 10000 , 12000 , 11000

Wartsila 1 x 20V34SG complete power plant 9.7 Mw at 750 RPM 50 Hz 11 kV and 12000 KVA total 1 unit 20V34SG generating set with ABB AMG 1120LT08DSE alternator Year of make is 2011 39.000 Running hours. In good, running condition

Used connecting rods available for immediate delivery.

Immediately available used exhaust pipe.

Immediately available used exhaust pipe.

Immediately available used exhaust pipe

6 x 12V32LNE Wartsila gen sets Available from our stock in Turkey 1998 made in good condition 4860 Kw at 720 RPM 60 Hz 8790 kVA average working hours: 28.000

Immediately available used rocker arm bracket

Immediately available used rocker arm bracket

Completely refurbished oil coolers, also used ones in stock

Immediately available used exhaust pipe

Immediately available used exhaust pipe

Immediately available used emergency switch-off

Immediately available new raw water pump

Year 2006 Capacity 680 kw 1200 rpm Alternator STAMFORD 800Kw,1200 rpm, 60Hz, 3 phase

Immediately available used emergency switch-off

Ready to ship recon crankcase

Immediately available Completely overhauled in-store air coolers

Immediately available Completely overhauled in-store air coolers

Immediately available used injection line

Immediately available used injection pump

Immediately available used hand pump

Immediately available used fuel feed pump

Immediately available used lubricating oil coolers

Immediately available recon Smierölfiter housing

Immediately available overhauled lubricating oil pump, also used we have all in stock

Wartsila 2 x 16V32LN Diesel Generating Sets Two identical units. Prime mover is Wartsila 16V32LN diesel engine which is 4-stroke, turbocharged and intercooled made in year 2004. Engines are coupled with ABB synchronous and brushless alternators. Both engine and alternator are installed on rigid common base frame and they have been operated in very limited hours. They are recently dismantled from a vessel and are ready for immediate transportation. Gensets are outside under tarpaulin and auxiliaries and turbos and governors are in a warehouse. Inspection is possible by appointment only. Technical data: Engine type Wartsila 16V32 LN-CR Number of units 2 Output 6.3 MWe / 60 Hz/ generator Rotation Speed 720rpm Manufacturing year 2004 Alternator ABB AMG0900XU10SE Voltage / Frequency 11000 V/ 60Hz

Immediately available used intermediate wheel

Immediately available used intermediate wheel

Immediately available used gear camshaft

Immediately available used fuel double filters

Immediately available used centrifugal lubricating oil fitter

Wartsila 8R32 Crankshaft Standard sized Measurement reports available Without cracks or weldings

Key data: 3645

Wartsila 9R32LN generator 1 unit available Year:2005 60 Hz 3645 Kw at 720 RPM

Engine type: 18V34SG Electrical power output: 5500kWe, 6838kVA Engine speed, direction: 750rpm, CW Generator type: ABB HSG 900XS8, 15kV, 50Hz Engine control system: WECS 3000 Turbocharger: Napier NA 355 Fuel: Natural gas Application mode: Cogeneration power plant Year: 1995 Running hours: 54855 h Running hours since last overhaul (48721rhs, 05.2010) 6131 h Next major overhaul: 64000 h Original installation: Denmark Genset condition: Excellent Stopped: 08.2022 Service history and documentation: Available Location: Denmark (will be in Hungary 2024 Q2) Scope of supply: Genset Heat recovery Gasramp Silencer lube oil tank Starting air compressor and vessel

Injection Pipe 167150, Shielded Straight Shape OEM Wartsila VASA V32 / W32 part number 167150 Please kindly note that we also have another Wartsila spare parts on stock. If you are interested we would be pleased to provide you with our stock list.

OEM Wartsila 524 TS - Inlet Valve 121101 - 24TS Part number - 121101 Inlet valves are new and unused (Condition - See photos, unused, from a canceled order, stored since 2013). Please kindly note that we also have another Wartsila spare parts on stock. If you are interested we would be pleased to provide you with our stock list.

OEM Wartsila 524 TS - Connecting Rod Bearing Set, std. 111406 - 24TS Part number - 111406 New and unused (Condition - See photos, unused, from a canceled order, stored since 2013). Please kindly note that we also have another Wartsila spare parts on stock. If you are interested we would be pleased to provide you with our stock list.

60MW -6 sets of Wartsila VASSA 12V46( 10.5 MW ,50HZ) HFO power plant

Key data: 735 KW, 1800 1/min

Due to new motorization in rotating state Removed The engine is installed by us at that time and from 0 to 56,423 hours of rotation with us very well fed.

Immediately available new

Immediately available overhauled lubricating oil pump, also used we have all in stock

Wartsila 6L20 Genset YOM: 2007 1200 Kw at 1000 RPM 50 Hz 15.000 Working hours & in good condition Available from our Stock in Turkey

Wartsila L32 Connecting rods 8 Pcs available from stock From our Istanbul stock Reports available Tested for cracks and ovality In good condition

Stationaerer gas tank for heating system 2,800 litres Remaining capacity approx. 1,000 litres With foundation slab Last Pruefung faellig 2010 Free loaded truck Special price LPIque Propane LPG Vaillant White Head

Elster SM-RI-X-E G1600 Turbine Wheel Gas Meter Elster Turbine Wheel Gas Meters SM-RI-X-E-G1600-200-98.5-K (170) Qmax: 2500 m³/h Qmin: 130 m³/h pmax: 89.5 bar Item #: 10520813-2014 Pulse generator HF2 162,370 Imp/m³ Regular price: 21.540,-€ net

with new (2019) Burny Lincoln Phantom II touchscreen control Burny 8 software center-center rail: 5000 mm cuttingwidth: 4000 mm 3 gas cutting heads, each adjustable in height Cutting table not included Longitudinal travel X-axis: 18 meter Cross travel Y-axis: 5 meter Gas cutter: 3x Read-out / Control: Burny 8 Lincoln Phantom II

Plasmacutting machine for plates amp; tubes! Type: MG 12001.35PPr + CH1200PP 2 plasma cutting heads Hypertherm HPR130 powersource Esab Kjellberg Fine Focus 800 powersource