transver used for sale

Made in Italy machine according to DIN 8606 Tip height: 260 mm Turning diameter over bed: 520 mm Swing over carriage: 300 mm Centre distance: 1500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (24) 9-1600 rpm (option 11-2000 U/min) Engine output: 5.5 kW (option: 7.5 kW) feed Z-axis: (93) 0.028 6.43 mm / Rev Feed x axis: (93) 0.012 2.73 mm / Rev Thread, metric: (54) 0.5-224 mm Thread, Witworth: (55) 72 - 1/8 TPI Thread, module: (54) 0.5-112 mm Thread, Diametral Pitch: (54) 64 - 1/4 D.P.. Cross slide Lxw: 650 x 230 mm Transversal carriage stroke: 340 mm Upper carriage Lxw: 350 x 150 mm Upper carriage stroke: 150 mm Tailstock Quill diameter: 85 mm Tailstock Quill stroke: 200 mm Tailstock taper: MK 5 Weight: 3,100 kg Facilities: -Movement of the tailstock pneumatically supported -Acceptance Protocol according to DIN 8605, ...

We offer you here a used workbench of the manufacturer Jung Heinrich for sale. You can freely choose between the following workbench depths: Workbench depth: 800 mm Technical data for the workbench: Manufacturer: Jung Heinrich Type: Esmena The scope of delivery includes: 02x workbench stand, used Material color: dark green or blue Stand profile: 76.2 x 74.7 mm Stand height: 900 mm Stand depth: 800 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material color: orange Box profile: 85 x 40 mm clear width: 2,775 mm 04x locking pins, used Version: completely galvanized 06x drill screws, new Version: galvanized Dimensions: 6.3 x 70 mm 01x chipboard II. choice, used Thickness chipboard: 38 mm Width chipboard: 2,950 mm Depth chipbo ...

Made in Italy machine according to DIN 8605: lathe with increased accuracy. Tip height: 215 mm Turning diameter over bed: 430 mm Swing over carriage: 240 mm Top width: 1,000 mm Bed width: 290 mm Spindle bore: 52 mm Spindle nose: Camlock 6 " Spindle speeds variable: 6 Spindle speeds: 60-2,000 rpm S6/S1 engine power: 4 kW (option: 5.5 kW) feed Z-axis: (38) 0.05 - 1.88 mm / Rev Feed x axis: (38) 0.02 1,084 mm / Rev Thread cutting, metric: (30) 0.45-20 mm Thread cutting, Witworth: (35) 80-1 3/4 TPI Thread cutting, module: (25) 0.25-10 mm Thread cutting, Diametral Pitch: (30) 160-3 1/2 D.P.. Cross slide Lxw: 370 x 190 mm Transversal carriage stroke: 240 mm Upper carriage Lxw: 275 x 115 mm Upper carriage stroke: 120 mm Tailstock Quill diameter: 60 mm Tailstock Quill stroke: 135 mm Tailstock taper: MK 4 Weight: approx. 2,000 kg Facilities: -Infinitely variable  ...

Technical data: -Table size 1600 x 370 mm -Work area of the axles -X (longitudinal) 1000 mm -Y (transverse) 320 mm -Z (vertical) 420 mm -Milling head left + right Tilt + Swivel - 9 table feeds 20-800 mm / min -Rapid traverse longitudinal / transverse 3000 mm/min -Rapid traverse vertical 1375 mm / min -maximum distance spindle - top 480 mm -min / max distance spindle Center / stand 450 mm -Tool holder ISO 50 - work spindle speeds in 12 levels adjustable 45-1400 RPM - coolant system - powered 400 V / 5,8 kW -Space requirement approx. B H 2100 x 2200 x D 2800 mm -Weight approx. 3500 kg

Reinbacker- rope turning lathe chuck up your part- twin routers transverse your material as lathe slowly rotates your material several passes give you a straight or tapered spiral like a rope turning or straight or spiral flutes

Loop scope Length x width 1200 x 600 mm Distance table spindle Center max. 700 mm Wheel Max (D x W x d) 400 x 80 x 127 mm Grinding head and drive Y-axis (vertical movement) Vertical grinding head 550 mm Distance from spindle Center table 150... 700 mm Machine table and drive x axis (longitudinal movement) Magnetic clamping plate size 1200 x 600 mm Table longitudinal travel, max. 1300 mm Table burden, including magnetic clamping plate, Max 800 kg Stand and drive Z-axis (transversal movement) Stand transverse stroke, 560 mm Space requirements, power consumption, weight Space, with coolant system 4410 x 2600 mm (W x D), Machine height 2550 mm Weight of the machine (incl. control cabinet), CA. 5400 kg

Control system Heidenhain TNC 415 Spindle diameter 130 mm Tapered hollow spindle ISO 50 Spindle speed range 10 to 1500 rpm Table transverse (X): 3500 mm Rolling headstock stand for (Y): 2000 mm Longitudinal displacement rack (W): 1250 mm Eject working spindle (Z): 800 mm Table load 12 000 kg Machine weight: 36 000 kg

Catalog number R059 - new machine - CE certificate - saw diameter 400mm - cutting width of the parallel gardener in Z400, Z400 EL 1000/1350 / 1525mm - dimensions of the sliding carriage 3200mmx420mm - diameter of the saw and the scoring hole 120mm, 20mm - sliding table 420x3200 mm anodized - cutting length 3500mm - blade diameter (not included) max 400 mm, 350 mm with the scoring unit - 120 x 20 mm cutter - not included - cutting height 90 ° 125 mm, 45 ° 90 mm - 3 cutting speeds 3000/4000/5000 rev. / min. - cutting width between the saw and the parallel stop 1350 mm - transverse table (1420 x 650 mm) with transverse stop with 2 buffers - manual height adjustment and blade inclination - automatic star / delta switch - weight 850 - 1080 kg - 400 V / 7 kW (9.5 HP) motor (S6) - 1.3 kW undercutter power (S6) Net price: 29300 PLN Net price: EUR 6735 depending on th ...

We offer you here a used workbench frame of the manufacturer Jung Heinrich for sale. Workbench depth: 600 mm Technical data on the workbench frame: Manufacturer: Jung Heinrich Type: Esmena The scope of delivery includes: 02x workbench stand, used Material color: dark green or blue Stand profile: 76.2 x 74.7 mm Stand height: 900 mm Stand depth: 600 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material color: orange Box profile: 85 x 40 mm clear width: 2,775 mm 04x locking pins, used Version: completely galvanized The images serve to illustrate the material. The material color may differ if necessary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 workin ...

TOS WHN 130 MC used machine Specifications System Heidenhain TNC 426 Working range Spindle diameter 140 [mm] Taper in the spindle ISO 50 Table transverse adjustment (X) 3000 [mm] Vertical headstock adjustment (Y) 2000 [mm] Vertical travel (Z) 1250 [mm] Spindle stroke (W) 560 [mm] 2X Clamping surface 1800 x 1600 [mm] Speed range 10 - 2500 [rpm] Main motor output 37,0 [kW] Max. workpiece weightƒ 8000 [kg] Accessories Tool changer for 60pcs Tool cooling Chip conveyor

We offer you here a used workbench frame of the manufacturer Jung Heinrich for sale. Workbench depth: 1,000 mm Technical data on the workbench frame: Manufacturer: Jung Heinrich Type: Esmena The scope of delivery includes: 02x workbench stand, used Material color: dark green or blue Stand profile: 76.2 x 74.7 mm Stand height: 900 mm Stand depth: 1,000 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material color: orange Box profile: 85 x 40 mm clear width: 2,775 mm 04x locking pins, used Version: completely galvanized The images serve to illustrate the material. The material color may differ if necessary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5  ...

Table clamping area: 310 x 1400 mm Table movement x: 950 mm Table movement y: approx. 325/345 mm Table movement z: approx. 500 mm Spindle speeds: 20 - 1500 rpm Feeds longitudinally and transversely: 18 - 620 mm/min Feeds vertical: 18 - 620 mm/min electr. Connection: 380 V kW Space requirement: 1900 x 1600 x 1750 mm Weight: approx. 1500 kg

Machine details Location 1105-02917 Machine type Machining Center - Vertical Make DECKEL-MAHO DMG Type DMC 63 V Built 2001 Control type Cnc Location France Origin Germany Delivery JULY 2020 Freight base from stock, freely loaded Price On request Technical details x-Way 630 mm y-way 500 mm z-way 500 mm Table size 800 x 500 mm Spindle mount ISO 40 Range 0 - 8000 rpm Feeds - longitudinal/transverse/vertical 1 - 30000 mm/min Rapids - longitudinal/transverse/vertical 30 m/min Number of tool magazine slots 24 Tool diameter at full assembly 80 mm Tool diameter at 2 free spaces 140 mm Tool length max. 300 mm Tool weight max. 7 kg Table load 500 kg Spindle motor 9 / 13 kW Control Siemens 810 D Total performance requirements 30 kVA Machine weight approx. 4.2 t Information Tested machine ready for demonstration under current YEAR OF ...

Make: KHS Innopack Type: Guarantee A 1-3000 Built: 1995 Power: 4,200 containers/h at 3 x 4 and 5 x4 bottles/containers with 10 gripper heads (manufacturer specification) and 10 GDB boxes transverse Dimensions: (LxWxH) 4000x2350x2400 Max package dimensions: 3,000 X 440 X 380 mm (LxWxH) Control: S5 Format parts: for 0.25 / 0.5 / 0.7 ltr. GDB Bottles and Boxes Special feature: Format part change with electric pulley Condition: good

We offer you here a used workbench frame of the manufacturer Jung Heinrich for sale. Workbench depth: 600 mm Technical data on the workbench frame: Manufacturer: Jung Heinrich Type: Esmena The scope of delivery includes: 02x workbench stand, used Material color: dark green or blue Stand profile: 76.2 x 74.7 mm Stand height: 900 mm Stand depth: 600 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material color: orange Box profile: 70 x 35 mm clear width: 1,430 mm 04x locking pins, used Version: completely galvanized The images serve to illustrate the material. The material color may differ if necessary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 workin ...

We offer you here a used workbench frame of the manufacturer Jung Heinrich for sale. Workbench depth: 1,000 mm Technical data on the workbench frame: Manufacturer: Jung Heinrich Type: Esmena The scope of delivery includes: 02x workbench stand, used Material color: dark green or blue Stand profile: 76.2 x 74.7 mm Stand height: 900 mm Stand depth: 1,000 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material color: orange Box profile: 70 x 35 mm clear width: 1,430 mm 04x locking pins, used Version: completely galvanized The images serve to illustrate the material. The material color may differ if necessary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5  ...

YEAR: 08/2004 LONGITUDINAL CORSA: X 800 MM TRANSVERSE COURSE: Y 700 MM VERTICAL COURSE: Z 700 MM ASSE B INDEXED 1st PALLET (2) 500X500 MM CNC MAPPS MSG-501 TOOL WAREHOUSES 60 LOCATIONS ATTACK MANDRINO BT40 MANDRINO MASSIMA VELOCITY 12000 RPM POWER OF MANDRINO'S POWER 26 KW

We offer you a used pallet racksystem manufacturer Jung Heinrich for sale. Technical data on the pallet racking system: Shelving system: Jung Heinrich Type: T Technical data for the list: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 19,600 mm Number of fields per row of shelves: 05 pcs. . . . . . . . . . . . . . . . . . . . . . . . . . . . Number of planes plus ground plane: 02 pcs. Technical data on volume: Number of pallet slots per field: 12 pcs. Number of pallet slots per row: 60 pcs. Total number of pallet slots: 60 pcs. based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet ( max. ): 450 kg Included are: 06x Pallet rack, used Material color: blue Stand profile: 100 x 65 mm Incl. transverse and diagonal st ...

Belt conveyor "Italmeccanica" mm: 1000 Working width mm: 1600 2 brushes for lateral processing in the entrance area Longitudinal machining brushes Horizontal brush unit Horizontal brush unit Brush roller (transversal) Weight Kg: 2000 Total connection KW: 15.5

We offer you a used pallet rack manufacturer Rosss. Technical data for the pallet control stand: Shelving system: Rosss Included are: 01x Pallet rack, used Material color: sendzimir galvanized Profile: 90 x 75 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed truss ) 2,000 mm high 1,100 mm deep Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection carried out in accordance with DIN EN 15635 in accordance with the Requirements of the BGR 234 visual inspection for all shelving systems Delivery with our own fleet (without discharge)

We offer you here a used workbench frame of the manufacturer Jung Heinrich for sale. Workbench depth: 600 mm Technical data on the workbench frame: Manufacturer: Jung Heinrich Type: Esmena The scope of delivery includes: 02x workbench stand, used Material color: dark green or blue Stand profile: 76.2 x 74.7 mm Stand height: 900 mm Stand depth: 600 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 04x workbench traverses, used Material color: orange Box profile: 70 x 35 mm clear width: 1,430 mm 08x locking pins, used Version: completely galvanized The images serve to illustrate the material. The material color may differ if necessary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 work ...

A) Total grinding units: 02 - longitudinal - bottom Grinding units total: 02 - transverse - top - bottom B) Total grinding units: 02 oscillating - right C) Total grinding units: 02 oscillating - links D) Orbital grinding unit total: 02 Complete loading

We offer you a used pallet racksystem manufacturer Redirack for purchase. Technical data on the pallet racking system: Shelving system: Redirack Technical data for the list: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 16,798 mm Number of fields per row of shelves: 05 pcs. . . . . . . . . . . . . . . . . . . . . . . . . . . . Number of planes plus ground plane: 02 pcs. Included are: 06x Pallet rack, used Material color: blue Stand type: H Stand profile: 83 x 83 x 15 x 2.50 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( welded truss ) 1,500 mm high 1,050 mm deep 20x Pallet rack trusses, used Material color: orange Box profile: 130 x 50 mm Design: Head traverse clear width: 3,260 mm max. load per pair of trusses 2,500 kg at the same rate. distributed load  ...

We offer you here a used workbench frame of the manufacturer Jung Heinrich for sale. Workbench depth: 1,000 mm Technical data on the workbench frame: Manufacturer: Jung Heinrich Type: Esmena The scope of delivery includes: 02x workbench stand, used Material color: dark green or blue Stand profile: 76.2 x 74.7 mm Stand height: 900 mm Stand depth: 1,000 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 04x workbench traverses, used Material color: orange Box profile: 70 x 35 mm clear width: 1,430 mm 08x locking pins, used Version: completely galvanized The images serve to illustrate the material. The material color may differ if necessary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 ...

CNC Double Column Vertical Lathe GORBREX model TKV525( built on the corp of SEDIN Lathe )Manufacturer: GORBREX – PolandModel: TKV525 Machine is new and build on Customer requestCondition : very good, under powerControl: SIEMENS or other - on Customer request Delivery time: 6 - 12 monthsMachine with warranty!Technical details :Table diameter: 2250 mmDistance between table and ram 0 - 1780 mmDistance between table and lower surface of transversal beam 400 - 2140 mmWorkpiece :Max workpiece diameter 2500 mmPictures are of one which was made for our German Customner and delivered to him last autumn.

Complete printshop from one place in germany: Manufacturer: Ryobi 5 colors Model: 755 (S-5-A) Year: 03-2006 Equipment: aut. Print provision, pallet feeder, oscillating FA IVS equipment, Spectro Pro densitometer serial no. B201004, plate punch Beil, Connection for Foellmer counting tape inserter OK-90 Possibly. Number of prints: 38 million Availability: spring 2021 Price expectations: Defects: none, regular maintenance Manufacturer: Horizon Model: VAC-100A, SPF-200A HMU-100, ST-40, FC-200A, SC-200 Year: 04/2008 Equipment: Small format equipment MS-100, additional blower f. VAC-100, stacking lowering table, manual system HMU-100 Availability: spring 2021 Defects: none Manufacturer: Polar 92 Model: XT Year: 02-2007 Availability: spring 2021 Defects: none, regular maintenance Manufacturer: Horizon folding machine Model: AFC-504AKT Year: bought used 04 - 2009  ...

TECHNICAL DATA: Working width mm: 1600 No 2 side brushes Lengthwise brushing unit Horizontal brush Horizontal brush Brush roller (transversal) Weight Kg: 2500 Total power installed kW: 11

TECHNICAL DATA: Working width mm: 1600 No 2 side brushes Lengthwise brushing unit Horizontal brush Horizontal brush Brush roller (transversal) Weight Kg: 2500 Total power installed kW: 11

Manufacturer: Strothmann Type: FW KFW RS25 5T Year of construction: 2015 Available quantity: 12 pcs. Location: Nuremberg Payload: 5000 kg Dimensions: 1.2 x 1.26 m Width over all: 1420 mm Installation height: 0.6 m Track gauge in main direction: 1100 mm Track width in transverse direction: 1000 mm Drive power: 0.25 kW Powertrain: bevel gear, two cardan shafts and four hubs for connection Weight: 1000 kg Base frame: Sturdy welded construction Loading area: four manually adjustable sliders with grids to provide center nests in four stages Included: drive cassettes, pneumatic lifting device for lane change, floor centering, coupling mechanism for towing operation The beams were used in a line for transporting and assembling gearboxes and motors OPTIONAL: The entire line with rail system and control cabinets etc. is optionally available until dismantling in mid-Novembe ...

We offer you a used pallet racksystem manufacturer Redirack for purchase. Technical data on the pallet racking system: Shelving system: Redirack Technical data for the list: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 80,315 mm Number of fields per row of shelves: 24 pcs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Number of planes plus ground plane: 02 pcs. Included are: 25x Pallet rack, used Material color: blue Stand type: H Stand profile: 83 x 83 x 15 x 2.50 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( welded truss ) 1,500 mm high 1,050 mm deep 96x Pallet rack trusses, used Material color: orange Box profile: 130 x 50 mm Design: Head traverse clear width: 3,260 mm max. load per pair of trusses 2,500 kg at the same rate. distributed load  ...

BOSCH Type KLD 1041 Leak Test Machine for Ampoules and Vials Leak test machine for glass containers. Linear automatic machine for the inspection of ampoules, injection cylinders/cartridges and injection bottles/vials, which checks each container at four inspection points by means of high-voltage technology. The testing principle is based on the detection of the changing impedance of a container filled with an electrically conducting liquid. The containers are examined for: hairline fissures and pinholes ; insufficient glass wall thickness/tip domes too thin ; capillary pores ; leaking fusion points, sealing points and ampoule neck tips ; absence of fill. MAIN FEATURES: It is recommended to carry out the container leaktightness test directly after sterilization or fusing. The unit is equipped with: conveyor system, infeed belt, 4 high-voltage inspection stations (1-2 check bodies and ...

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: GE FANUC Series 16-T Technical data Number of axis total: 5 Longitudinal travel (X-axis): 500 mm Transversal travel (y-axis): 400 mm Vertical travel (z axis): 500 mm B axis Pallets: number: 4 Length: 400 mm Width: 400 mm Maximum workpiece weight: 300 kg Tool changer: Number of tools: 96 Tool diameter max.: 80 mm Diameter with free adjacent pockets: 160 mm Tool lenght: 300 mm Max. tool-weight: 12 kg Time of tool changing: 2.5 sec Average chip-to-chip time: 6 sec Spindle nose: ISO: 40 DIN69871 Distance spindle nose to table: 100 - 600 mm Distance from vertical spindle to table: 20 - 420 mm Spindle speeds: stepless from: 0 rpm up to: 12000 rpm Feed range: 1 - 12000 mm/min Rapid traverse:: 20 m/min Air connect: 6 bar Volta ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Control: MAZATROL CAM M-2 Technical data Table length: 1240 mm Table width: 550 mm Longitudinal travel (X-axis): 1000 mm Transversal travel (y axis): 500 mm Vertical travel (z axis): 660 mm Table load max.: 800 kg Taper in spindle: 40 ISO Spindle speeds: stepless vertical from: 28 rpm up to: 4000 rpm Tool changer: number of tools: 30 Tool diameter: 100 mm Diameter with free adjacent pockets: 130 mm Max. tool-weight: 7 kg Voltage 50 Hz 3x: 380 Volt Milling spindle motor: 5.5 kW Machine´s weight about: 6500 kg Overall dimensions machine: Length: 3000 mm Width: 2920 mm Height: 3200 mm Various accessories: Full splash cabin Coolant system Tool changer: (number of tools): 30

OERLIKON / ALPHATOME II T30 HP300 PPM 400 OERLIKON - Typ: ALPHATOME II T30 HP300 PPM 400 - Baujahr: à 2013. Special features of the ALPHATOME II series / EQUIPMENT: Camera system: Moving camera on the cross-drive carriage for easy positioning and cutting monitoring by the operator from the control panel. The graphic is done by a permanently visible button on the touch screen interface. Protective devices: 7 Facilities for the protection of operating personnel. Photocells in the front and back of the bridge. Emergency stop button on all corners, as well as on the external control panel. Anti-glare-/splash protection: The anti-glare panel of the bridge is raised or lowered automatically or by pressing a button. On the sides, the panel can be opened manually for the burner and wear parts. Furthermore, the noise development is significantly reduced and resulting smoke is bet ...

Fill 3D-Ultrasonic Cutter Here we offer you a Fill 3D ultrasonic cutting system. Fill 3D-ULTRASONIC SCHNEIDER 3D ULTRASONIC CUTTER The 3D ultrasonic cutter from Fill enables three-dimensional contour cutting of fiber-reinforced plastics using ultrasonically excited cutting systems. Your advantages: Ergonomic feeding and unloading Easy creation of bleed programs (NC control) Space-saving system concept (as an alternative to the robot) High repeatability High process stability Easy and fast tool change Possible integration into an overall process chain The principle: The linear axis portal enables precise guidance of the ultrasonic knife with a small footprint and simple kinematics. Thanks to the Siemens 840 D CNC control, the trimming device can be programmed like a machine tool. Tool corrections or path changes can simply be carried out directly on the machine. As standa ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 426/430 Technical data Number of axis total: 3 Table length: 900 mm Table width: 600 mm Longitudinal travel (X-axis): 710 mm Transversal travel (y-axis): 550 mm Vertical travel (z axis): 500 mm Table load max.: 1600 kg Tool changer: Number of tools: 30 Tool diameter: 90 mm Diameter with free adjacent pockets: 140 mm Tool lenght: 300 mm Max. tool-weight: 8 kg Time of tool changing: 5 sec Spindle nose: ISO: B40 Spindle speeds: from: 100 rpm up to: 12000 rpm Feeds: stepless longitudinal from: 1 mm/min up to: 15000 mm/min transversal from: 1 mm/min up to: 15000 mm/min vertical from: 1 mm/min up to: 1 mm/min Feed range: 10000 mm/min Rapid traverse: long.: 30 m/min Rapid traverse: transversal: 30 m/min Rapid traver ...

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 700 mm Table width: 300 mm Execution: hydraulic Max. distance from table to spindle-centreline: 500 mm Longitudinal travel (X-axis): 780 mm Transversal travel (y axis): 350 mm Automatic cross-feed: stepless up to: 7.00 m/min Table speeds: stepless from: 1.00 m/min up to: 30.0 m/min Automatic vertical feed: from: 0.0010 mm up to: 0.010 mm Vertical rapid traverse: 0.20 m/min Diameter of grinding wheel: 300 mm Width of the grinding wheel: 50 mm Grinding wheel speeds: number (steps): 2 from: 1775 rpm up to: 2180 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 8.15 HP Machine´s weight about: 3100 kg Overall dimensions machine: Length: 2100 mm Width: 1300 mm Height: 2450 mm Various accessories: Coolant system Wheel truieng attachment hydraulic ...

Grinding width mm 1300 Grinding units total 6 Ribbons 4 Grinding rollers 1 Steel roller Segment grinding shoe electronic Paint intermediate grinding Vacuum table Table height constant Grinding belt length mm 2620 Further technical data Machine control HEESEMANN SMA PC11/40 Oscillation HEESEMANN CSD Turning direction reversal Ionizing device Workpiece thickness min mm 3 Pass-through height mm 80 Grinding shoes total 1 Segment width mm 16 Grinding brush unit Roller grinding brushes Cleaning brush dust removal machine Main motor kW 31 Band speed max m/s 24 Grinding belt swarm. adjustable infinitely variable Feed max m/min 28 Feed Stepless Blow-off device grinding belt Segment control electromagnetic Aggregates frequency-controlled 5 Cross-bands adjustable infinitely variable Aggregate configuration w-q-s-q-q-q-b Pressure lamella rim unit transverse  ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data 1 column execution Table length: 400 mm Table width: 300 mm Longitudinal travel (X-axis): 200 mm Transversal travel (y axis): 200 mm Travel of the vertical slide: 250 mm Passage from grinding motor to table: 270 mm Max. grinding diameter: 15 mm Vertical travel of grinding spindle: stepless from: 2 mm up to: 32 mm Travel speeds: steps: 2 from: 4.0 m/min up to: 5.0 m/min Possible grinding-spindle speeds: stepless up to: 120000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 750 kg Overall dimensions machine: Length: 1200 mm Width: 900 mm Height: 1600 mm Various accessories: Rotary table diameter: 300 mm Set of clamping tools Air turbine

Technical data: - Load capacity E. chain hoist 250 kg - Lifting speed approx. m/min - Operation of the chain hoist via hand remote scanner - Man. Process hoist / transverse path + longitudinal path - Track gauge variable to approx. 3500 mm - Hook height approx. 2800 mm - Crane track length approx. 5000 mm - Height approx. 3900 mm - UK crane carrier approx. 3000 mm - 4 pieces of steel supports made of recheck tube 150 x 100 mm H 3900 mm - 2 longitudinal suspension carriers approx. 5000 mm - Cross suspension carriers approx. 3500 mm - Weight of the plant approx. 1000 kg

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 135 Operating hours: 1012 Technical data Table length: 700 mm Table width: 250 mm Longitudinal travel (X-axis): 320 mm Transversal travel (y axis): 220 mm Vertical travel (z axis): 410 mm Spindle speeds: stepless from: 56 rpm up to: 3150 rpm Taper in spindle: 30 ISO Feeds stepless: longitudinal from: 8 mm/min up to: 1000 mm/min transversal from: 8 mm/min up to: 1000 mm/min vertical from: 8 mm/min up to: 1000 mm/min Vertical quill travel: 60 mm Rapid traverse: longitudinal: 2 m/min transversal: 2 m/min vertical: 2 m/min Voltage 50 Hz 3x: 380 Volt Motor power: 1.8 kW Total power required: 2.6 kW Machine´s weight about: 1000 kg Overall dimensions machine: Length: 1800 mm Width: 1200 mm Height: 1500 mm Various accessories: Digital readout number of ...

Technical data: - Load capacity E. chain hoist 250 kg - Lifting speed approx. m/min - Operation of the chain hoist via hand remote scanner - Man. Process hoist / transverse path + longitudinal path - Track gauge variable to approx. 3000 mm - Hook height approx. 2200 mm - Crane track length approx. 4000 mm - Height approx. 3500 mm - UK crane carrier approx. 2700 mm - UK - longitudinal rail approx. 3000 mm - 4 pieces of steel supports made of recheck tube 150 x 100 mm H 3500 mm - 2 longitudinal suspension carriers approx. 4250 mm - Cross suspension carriers approx. 3000 mm - Weight of the plant approx. 1000 kg

We offer you here a used workbench of the manufacturer Gemac for purchase. Workbench depth: 600 mm Technical data for the workbench: Manufacturer: Gemac Type: Normapal The scope of delivery includes: 02x workbench stand, used Material color: green Stand profile: 90 x 70 mm Stand height: 900 mm Stand depth: 600 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material colour: cream white IPE Profile: 80 x 42 mm clear width: 2,700 mm 04x locking pins, used Version: completely galvanized 08x drill screws, new Version: galvanized Dimensions: 6.3 x 70 mm 01x chipboard II. choice, used Thickness chipboard: 38 mm Width chipboard: 2,890 mm Depth chipboard: 600 mm Chipboard if necessary two-part The images serve to illustrate ...

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 95 mm Distance between centres: 250 mm Table length: 450 mm Table width: 175 mm Max. grinding diameter: 130 mm Transversal way of the table: 260 mm Vertical adjustment of the table: 50 mm Vertical adjustment of grinding head: 50 mm Table swivels: 360 ° Slewing range of grinding head: horizontal: 360 ° vertical: 220 ° Grinding spindle speeds: number (steps): 2 from: 3750 rpm up to: 7500 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 0.7 HP Machine´s weight about: 450 kg Overall dimensions machine: Length: 1000 mm Height: 1500 mm Various accessories: Set of collets Dividing attachment 3-jaw chuck diameter: 85 mm Spiral flute grinding attachment

We offer you here a used workbench of the manufacturer Gemac for purchase. Workbench depth: 800 mm Technical data for the workbench: Manufacturer: Gemac Type: Normapal The scope of delivery includes: 02x workbench stand, used Material color: green Stand profile: 90 x 70 mm Stand height: 900 mm Stand depth: 800 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material colour: cream white IPE Profile: 80 x 42 mm clear width: 2,700 mm 04x locking pins, used Version: completely galvanized 08x drill screws, new Version: galvanized Dimensions: 6.3 x 70 mm 01x chipboard II. choice, used Thickness chipboard: 38 mm Width chipboard: 2,890 mm Depth chipboard: 800 mm Chipboard if necessary two-part The images serve to illustrate ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data 1 column execution Table length: 400 mm Table width: 300 mm Longitudinal travel (X-axis): 200 mm Transversal travel (y axis): 200 mm Travel of the vertical slide: 250 mm Passage from grinding motor to table: 270 mm Max. grinding diameter: 15 mm Vertical travel of grinding spindle: stepless from: 2 mm up to: 32 mm Travel speeds: steps: 2 from: 4.0 m/min up to: 5.0 m/min Possible grinding-spindle speeds: stepless up to: 120000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 750 kg Overall dimensions machine: Length: 1100 mm Width: 1000 mm Height: 1800 mm

We offer you here a used workbench of the manufacturer Gemac for purchase. Workbench depth: 1,000 mm Technical data for the workbench: Manufacturer: Gemac Type: Normapal The scope of delivery includes: 02x workbench stand, used Material color: green Stand profile: 90 x 70 mm Stand height: 900 mm Stand depth: 1,000 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material colour: cream white IPE Profile: 80 x 42 mm clear width: 2,700 mm 04x locking pins, used Version: completely galvanized 08x drill screws, new Version: galvanized Dimensions: 6.3 x 70 mm 01x chipboard II. choice, used Thickness chipboard: 38 mm Width chipboard: 2,890 mm Depth chipboard: 1,000 mm Chipboard if necessary two-part The images serve to illu ...

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 640 Technical data Number of axis simultaneous: 5 Rotary table:diameter: 150 mm Table load max.: 25 kg Longitudinal travel (X-axis): 400 mm Transversal travel (y-axis): 200 mm Vertical travel (z axis): 385 mm B axis swivelling range: -110 / +30 ° Table speeds: stepless up to: 4000 rpm Holding torque of the table: 400 Nm Tool changer: Number of tools: 96 Tool diameter max.: 50 mm Tool lenght: 130 mm Max. tool-weight: 1 kg Time of tool changing: 0.8 sec Average chip-to-chip time: 3 sec Spindle nose: HSK: E40 Spindle speeds: stepless up to: 42000 rpm Rapid traverse:: 60 m/min Acceleration: 10 m/s Air connect: 6 bar Voltage 50 Hz 3x: 400 Volt Spindle power: 10 / 15 kW Torque max.: 8 / 12 Nm Machine´s w ...

We offer you here a used Workbench of the manufacturer Gemac for sale. Workbench depth: 1,000 mm Technical data for the workbench frame: Manufacturer: Gemac Type: Normapal The scope of delivery includes: 02x workbench stand, used Material color: green Stand profile: 90 x 70 mm Stand height: 900 mm Stand depth: 1,000 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material colour: cream white IPE Profile: 80 x 42 mm clear width: 2,700 mm 04x locking pins, used Version: completely galvanized Optionally, we offer you: 01x chipboard II. choice, used Thickness chipboard: 38 mm Width chipboard: 2,890 mm Depth chipboard: 1,000 mm Chipboard if necessary two-part Price per pcs.: 45,74 € incl. 19% VAT. 08x drill screws, new Vers ...

We offer you here a used Workbench of the manufacturer Gemac for sale. Workbench depth: 800 mm Technical data for the workbench frame: Manufacturer: Gemac Type: Normapal The scope of delivery includes: 02x workbench stand, used Material color: green Stand profile: 90 x 70 mm Stand height: 900 mm Stand depth: 800 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material colour: cream white IPE Profile: 80 x 42 mm clear width: 2,700 mm 04x locking pins, used Version: completely galvanized Optionally, we offer you: 01x chipboard II. choice, used Thickness chipboard: 38 mm Width chipboard: 2,890 mm Depth chipboard: 800 mm Chipboard if necessary two-part Price per pcs.: 36,59 € incl. 19% VAT. 08x drill screws, new Version:  ...