transfer press used for sale

General SKULW002 LocationNetherlands MakeAPI Heat Transfer TypeSCHMIDT SIGMASTAR - Eindampfanlage No.2016-0307-1-B Year of construction2016 Main Features MaterialStainless steel Motor18 KW Specified Features - Film evaporator Film evaporatorcheck Capacity2.725 kg/h MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 Information With switchgearcheck (as is) Floorspace8,5x5 m Total height5 m Extra SpecificationsThe specified Schmidt SIGMASTAR evaporation system with an evaporation capacity of 2.725 kg/h is designed for the concentration of adhesive water from an initial concentration of 8% TS to a final concentration of 36% TS. The system is designed as a multi-stage evaporator. The product is pumped from the buffer tank into the sump of the plate evaporator of the first stage. The product rises in the spaces between the plates and is concentrated in the process ...

FHS roller conveyor transfer pusher transfer pusher ejector 90° 4300-510-450RA1960 Make: FHSRunning direction: both directionsRoller width (RB): 450 mmNominal/outer width (NB): 510 mm / 650 mm with chain guidelength: 4300 mm2x oversliderwidth of slider: 1500 mmdiameter rollers: 50 mmroller distance: 75/100/125 mmMotor overslider and roller conveyor: SEW motor 300-500VFrame height: 140 mm/250 with chain guideConveyor speed: freely adjustable with frequency converterScope of delivery: without supports, without side guide 1x Movi-Mot frequency converter, 5x light barriersOptionally available:Side guide on one side and on both sidesSupports Features: angle: 90° KW: 0,18/S1, 0,75/S1 Roll width in mm: 450 Roll division in mm: 75, 100, 125 Conveyor speed m / s: freely adjustable Electric data: 380-500 Engine type: SEW Movi-Mot Nominal / outside width in mm: 510 / 650 Conveying length in mm ( ...

PRESS FORCES   total force (nominal): 72 to A new electrical control system and a mechanical and lubrication rebuild are required. One used PLATARG model 611 transfer press, high speed type. Full follow cams. Number of stations: 12 Number of rams: 11 + 1 slave Capacity on any one ram: 6 tons Speed range: 30 – 120 SPM Max shell height: 20 mm Transfer slide Machine awaiting refurbishment

IHI Transfer Press Model SL4-1600-450-220. With NC Feeder, Transfer System including Robots. New : 1984 Capacity : 1600 ton Stroke : 850mm Die height :1400mm Slide Adjustment : 500mm No. of Stroke : 16R.P.M Bolster Area : 4500 x 2200mm Clutch working Air Pressure : 4.5kg/cm2

Transfer press KRUPP PST-A 160 built in 1980. Technical data of the KRUPP PST-A 160 press: - nominal pressure: 160 tons - cutting force grade 1: 400 KN - force between stands: 1200 KN - number of working steps including cutting stage: 11 - distance between stands: 200 mm - slider stroke: 210 mm - drawing depth: 70 mm - range of jumps, infinitely adjustable: 15-75 / min. - production range of jumps with repeatability of its setting: 25-75 / min. - number of actuation movements: 15-25 / min. - a usable work resource for a jump in the range of 25-75 strokes per minute. : 20,000 J - maximum load on a single step: 500 KN - maximum load of a single step using inserts: 630 KN - maximum width of the tape: approx. 340 mm - maximum diameter of the cut: 120 mm - minimum diameter of the pattern: 30 mm - distance between stands: 2450 mm - height of tool building at the lower posi ...

CONTROLS   PLC SCHNEIDER PRESS DESIGN   drive system: eccentric / crank   number of slide actions: 11   feedstock transport direction: left to right PRESS FORCES   total force (nominal): 66 to SLIDE   slide force: 6 to   stroke: 114 mm SLIDE (MECHAN. PRESS)   variable speed: yes   stroke rate (min.): 40 /min   stroke rate (max.): 130 /min   main drive power: 7.5 kW STRIP-FEEDER   feeder type: roll feeder TRANSFER SYSTEM   distance between tools, stroke X fixed: 82 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 2875 mm   space requirements -front/back-: 1500 mm   total height: 2900 mm   total weight approx.: 7500 kg ATTACHMENTS (PRESSES)   safety guard / safety door: yes   2-hand engage ...

PRESS DESIGN   drive system: eccentric / crank   number of slide actions: 6

PRESS DESIGN   drive system: eccentric / crank   number of slide actions: 6   table cushion: yes 6 stations plus auxiliary station Used for eyelet production - tooling still mounted

CONTROLS   PLC SIEMENS S5 PRESS DESIGN   drive system: eccentric / crank   frame design: H-frame, monoblock   openings in uprights: yes   number of suspensions: 2   number of slide actions: 1   table cushion: yes   quick die change system: yes   feedstock transport direction: left to right PRESS FORCES   total force (nominal): 400 to   nominal work capacity: 32 kNm PRESS TABLE   table surface (left-right): 2600 mm   table surface (front-back): 990 mm   thickness of bolster plate: 200 mm   height above floor level: 800 mm   opening in bed (left-right): 2250 mm   opening in bed (front-back): 280 mm SLIDE   slide force: 400 to   table surface (left-right): 2600 mm   table surface (front-bac ...

PRESS DESIGN   drive system: eccentric / crank   openings in uprights: yes   feedstock transport direction: right to left PRESS FORCES   total force (nominal): 315 to   nominal work capacity: 45 kNm PRESS TABLE   table surface (left-right): 2250 mm   table surface (front-back): 1100 mm   thickness of bolster plate: 150 mm   height above floor level: 1000 mm SLIDE   slide force: 315 to   table surface (left-right): 2250 mm   table surface (front-back): 880 mm   stroke: 210 mm   stroke rate (max.): 80 /min SLIDE (MECHAN. PRESS)   slide adjustment: 120 mm   stroke rate (min.): 25 /min   stroke rate (max.): 80 /min   main drive power: 60 kW SLIDE EJECTOR / CUSHION   working principle: pneumatical  & ...

CONTROLS   PLC PRESS DESIGN   drive system: eccentric / crank   number of slide actions: 12 PRESS FORCES   total force (nominal): 36 to SLIDE   slide force: 3 to   stroke: 38 mm SLIDE (MECHAN. PRESS)   variable speed: yes   main drive power: 4 kW OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 50 mm   feedstock transport direction: front-back STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 50 mm   pilot release system: no   band lubrication system: optional TRANSFER SYSTEM   number of tool stations: 13   distance between tools, stroke X fixed: 63.5 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right ...

PRESS DESIGN   number of slide actions: 12 PRESS FORCES   total force (nominal): 36 to SLIDE   stroke: 44 mm   stroke rate (max.): 160 /min This machine will have the following installed/added to ito new lubricationo new electrical installationo new protectionso CE conformity Number of station 13 (12+1). Capacity on any one station 3 tons. Max stroke 44 mm. Standard stroke cams. Max blank diameter 47 mm. Operating speed range 40 to 160 SPM max. Machine weight approx. 3200 kg.

PRESS DESIGN   drive system: eccentric / crank   frame design: H-frame, tie rod   openings in uprights: yes   table cushion: yes   feedstock transport direction: left to right PRESS FORCES   total force (nominal): 200 to PRESS TABLE   table surface (left-right): 1780 mm   table surface (front-back): 1300 mm   opening in bed (left-right): 1445 mm   opening in bed (front-back): 260 mm SLIDE   slide force: 200 to   table surface (left-right): 1500 mm   table surface (front-back): 1100 mm   stroke: 178 mm   stroke rate (max.): 120 /min SLIDE (MECHAN. PRESS)   slide adjustment: 150 mm   stroke rate (min.): 20 /min   stroke rate (max.): 120 /min DIE CUSHION (TABLE CUSHION)   number of cushions: 11  & ...

PRESS DESIGN   drive system: eccentric / crank   number of slide actions: 10 SLIDE   stroke rate (max.): 110 /min 10 stations + 1 auxiliary 5 ton per station Distance between stations: 54 mm  (2-1/8") STROKE OF CAMS (STANDARD) #1 25-35 mm  (1- 1-3/8") #2 to #10  25-41 mm, (1 - 1-5/8") Speed: 110 SPM

Enclosure transfer element photovoltaic system GAK transfer element RJ45 for I ´ checker connection Manufacturer Wieland GET solar new, fully assembled Price per piece 400,00 6 STK. in stock

M. No. : 6064/11 6708 Equipment / Additional information: Working width: max. 550 mm Product transport: 5 pieces flat belts - transport elements Departmental equipment: 5 pieces breakout elements with blown air Speed: 1 - 165 m / min, infinitely adjustable Mobility: mobile with wheels and feet

Power rotor diameter: 25mm, Design generation : 3, RPM : 3600 max, Max. inlet.: 7 bar, Power: 0.3-1.1 Flow: 10-30.4 L/min, Max. Discharge pressure: 16 bar BERGEN BRM, WARTSILA, DEUTZ KHD/MWM, MAN B&W, JENBACHER, ABC, PIELSTICK , GUASCOR, MAK, CATERPILLAR, VOLVO, WICHMANN, PUMPS, SACM, SEPERATOR, COMPRESSSOR, FILTER, PUMPS, VACUUM SAVAGE SYSTEM, HEAT EXCHANGER & COOLER. Spares are available and all kinds of spare parts can be given. Please contact us for your questions. EVE International AS E-Posta : info@eveinternational.com.tr Phone : +90 0216 519 2707 Fax : +90 0216 519 2720

Number of drill units 7 Number of tapping units 4 Number of clamps 8

The scope of delivery includes: 02x Pallet rack beam, used Material colour: RAL 2004 orange Box profile: 145 x 50 x 1.75 mm Truss type: PNB0445 clear width: 3,600 mm 02x Pallet transfer station, used Material colour: RAL 2004 orange Box profile: 145 x 50 x 1.75 mm Truss type: PNB0445 clear width: 900 mm 01x L-angle, used Material colour: RAL 2004 orange Total length: approx. 1,100 mm L-profile: 100 x 50 mm Material thickness: approx. 3.00 mm Borehole grid: 50 / 50 mm 04x Screws M10 x 25 mm ISO4017 04x Nuts M10 self-locking 04x Washers M10 04x locking pins, used Finish: completely galvanized To secure the longitudinal beams against unintentional lifting Technical data for the pallet transfer station: Shelving system: Stow Type: Pal Rack NS Ideally suited for the following dimensions: Stand depth: 1,100 mm / 995 mm Stand profile dime ...

table diameter: mm stations: 10 axis stroke (X,Y,Z): 250 / 400 / 400 mm control: Siemens 840D total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Rotary cycle machining center for machining serial parts. 10 stations 31 NC axes Control: Siemens 840D Maximum productivity through parallel work processes on up to 9 stations Loading and unloading can be automated in parallel to the main time Travels X / Y / Z: 250/400 / 400mm 10 planet carriers rotatable 360 ° for clamping devices, incl. Media feed-through for hydraulics and pneumatics 5 stations equipped with 6-fold revolver make Sauter Machine hours as of December 20, 2020 Operating hours 15,024 h Production hours 8,115 h Manufacturing costs: € 1,200,000 The application on customer workpieces can be offered. The data for this ad was created with ModulMWS - the software solution of Log ...

Number of working units: 0   Total power: 0 kW Type: 0   CNC Brand: 0 CNC Model: 0 Technical data Units: vertical: 14 Rotary table:diameter: 400 mm Number of work stations max.: 15 Work-piece clamping: with device diameter: 50 mm Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.10 kW Weight of the control about: 300 kg Overall dimensions machine: Length: 800 mm Width: 700 mm Height: 2000 mm

Number of working units: 0   Total power: 0 kW Type: 0   CNC Brand: 0 CNC Model: 0 Technical data Units: horizontal: 2 Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.37 kW

The machine is in good technical condition. Working spindle diameter: 80mm Table dimensions: 900x1120mm By prior arrangement, the possibility of a tour in progress.

in good technical condition. Working spindle diameter: 100m Clamping surface of the table: 1000x1120 A tour is possible by prior arrangement.

Number of working units: 0   Total power: 0 kW Type: 0   CNC Brand: 0 CNC Model: 0 Technical data Units: horizontal: 2 Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.37 kW

Type: SR 1600/10000 Location: Czech Republic tour possible good condition

Machine in good technical condition, possibility of testing after agreement. Control system FAGOR year of manufacture 1997 Accessories: rotating knife head + additional dovetails behind the knife head for additional equipment (another knife holder or Morse taper drill equipment).

The machine is in good technical condition. Machine parameters: Table size 4800mm x 1050mm. Travel axes X/Y/Z 4000mm, 990mm, 1300mm Engine power 22/26KW. By prior arrangement, the possibility of a tour in progress.

Number of working units: 0   Total power: 0 kW Type: 0   CNC Brand: 0 CNC Model: 0

Number of working units: 0   Total power: 0 kW Type: 0   CNC Brand: 0 CNC Model: 0

Number of clamping stations: 0   Number of working units: 0   Total power: 0 kW (1) horizontal or (2) vertical Position workpiece stations: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK Technical data Number of positions: 16 Number of positions with indexationNumber of posit: 8 Number of working positions: 24 Tool lenght: max: 150 mm Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 6500 kg Overall dimensions machine: Length: 9800 mm Width: 4000 mm Height: 2900 mm Various accessories: Positions CNC: 2 pce Oil mist extractor: ELBARON Bar loader number of bars

Number of working units: 0   Total power: 0 kW Type: 0   CNC Brand: 0 CNC Model: 0 Technical data Voltage 50 Hz 3x: 380 Volt Spindle motor: 40 kW Machine´s weight about: 6200 kg Weight of the control about: 600 kg Overall dimensions machine: Length: 10606 mm Width: 4120 mm Height: 3400 mm

Number of working units: 0   Total power: 0 kW Type: 0   CNC Brand: 0 CNC Model: 0

Number of working units: 0   Total power: 0 kW Type: 0   CNC Brand: 0 CNC Model: 0

Number of clamping stations: 0   Number of working units: 0   Total power: 0 kW (1) horizontal or (2) vertical Position workpiece stations: 0   CNC Brand: 0 CNC Model: 0 Technical data Number of working positions: 14 Way of the table: 20 mm Workspace: 40 mm Screw diameter: 75/35/42 mm Spindle speeds: from: 3000 rpm up to: 18000 rpm Production capacity: 35 pce/min Machine´s weight about: 3500 kg Space requirement env.: 3 x 3 m2 Various accessories: Automatic loader

Number of clamping stations: 0   Number of working units: 0   Total power: 0 kW (1) horizontal or (2) vertical Position workpiece stations: 0   CNC Brand: 0 CNC Model: 0 Technical data Number of working positions: 14 Way of the table: 20 mm Workspace: 40 mm Screw diameter: 75/35/42 mm Spindle speeds: from: 3000 rpm up to: 18000 rpm Production capacity: 35 pce/min Machine´s weight about: 3500 kg Space requirement env.: 3 x 3 m2 Various accessories: Automatic loader

Number of clamping stations: 0   Number of working units: 0   Total power: 0 kW (1) horizontal or (2) vertical Position workpiece stations: 0   CNC Brand: 0 CNC Model: 0 Technical data Number of working positions: 14 Way of the table: 20 mm Workspace: 40 mm Screw diameter: 75/35/42 mm Spindle speeds: from: 3000 rpm up to: 18000 rpm Production capacity: 35 pce/min Machine´s weight about: 3500 kg Space requirement env.: 3 x 3 m2 Various accessories: Automatic loader

Number of clamping stations: 0   Number of working units: 0   Total power: 0 kW (1) horizontal or (2) vertical Position workpiece stations: 0   CNC Brand: 0 CNC Model: 0 Technical data Number of working positions: 14 Way of the table: 20 mm Workspace: 40 mm Screw diameter: 75/35/42 mm Spindle speeds: from: 3000 rpm up to: 18000 rpm Production capacity: 35 pce/min Machine´s weight about: 3500 kg Space requirement env.: 3 x 3 m2 Various accessories: Automatic loader

Number of clamping stations: 0   Number of working units: 0   Total power: 0 kW (1) horizontal or (2) vertical Position workpiece stations: 0   CNC Brand: 0 CNC Model: 0 Technical data Number of working positions: 14 Way of the table: 20 mm Workspace: 40 mm Screw diameter: 75/35/42 mm Spindle speeds: from: 3000 rpm up to: 18000 rpm Production capacity: 35 pce/min Machine´s weight about: 3500 kg Space requirement env.: 3 x 3 m2 Various accessories: Automatic loader

The machine is in good technical condition. Separating force: 220 kN Travel X: 2500 mm Travel Y: 1250 mm Control system BOSCH Rotary head In operation: 36200 h Accessories: 2 tool cartridges USB interface Weight: 11050 kg Upon prior agreement, the possibility of inspection while in operation.

Number of clamping stations: 0   Number of working units: 0   Total power: 0 kW (1) horizontal or (2) vertical Position workpiece stations: 0   CNC Brand: 0 CNC Model: 0 Technical data Number of working positions: 14 Way of the table: 20 mm Workspace: 40 mm Screw diameter: 75/35/42 mm Spindle speeds: from: 3000 rpm up to: 18000 rpm Production capacity: 35 pce/min Machine´s weight about: 3500 kg Space requirement env.: 3 x 3 m2 Various accessories: Automatic loader

Number of clamping stations: 0   Number of working units: 0   Total power: 0 kW (1) horizontal or (2) vertical Position workpiece stations: 0   CNC Brand: 0 CNC Model: 0 Technical data Number of working positions: 14 Way of the table: 20 mm Workspace: 40 mm Screw diameter: 75/35/42 mm Spindle speeds: from: 3000 rpm up to: 18000 rpm Production capacity: 35 pce/min Machine´s weight about: 3500 kg Space requirement env.: 3 x 3 m2 Various accessories: Automatic loader

Number of clamping stations: 0   Number of working units: 0   Total power: 0 kW (1) horizontal or (2) vertical Position workpiece stations: 0   CNC Brand: 0 CNC Model: 0 Technical data Number of working positions: 14 Way of the table: 20 mm Workspace: 40 mm Screw diameter: 75/35/42 mm Spindle speeds: from: 3000 rpm up to: 18000 rpm Production capacity: 35 pce/min Machine´s weight about: 3500 kg Space requirement env.: 3 x 3 m2 Various accessories: Automatic loader

Number of clamping stations: 0   Number of working units: 0   Total power: 0 kW (1) horizontal or (2) vertical Position workpiece stations: 0   CNC Brand: 0 CNC Model: 0 Technical data Number of working positions: 14 Way of the table: 20 mm Workspace: 40 mm Screw diameter: 75/35/42 mm Spindle speeds: from: 3000 rpm up to: 18000 rpm Production capacity: 35 pce/min Machine´s weight about: 3500 kg Space requirement env.: 3 x 3 m2 Various accessories: Automatic loader