We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
meta name="robots" content="all">
119,273 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Equipped with: lighting Engine type: Deutz F4L2011F fuel: diesel Hour reading: 632 h Power: 42 Key: Yes
used
Hemco hydraulic tracing lathe Hopper feed very good condition...$7,900 obo Contact Fred (716) 433 4224 (12:00 noon is best time to call)
new
Trackball with connection cable for Ultimax control Replacement for Hurco Ultimax 4 , Ultimax 3 Easy to change, ready to ship New
used
Technical data: - Bending capacity - steel pipe of 20 - 60 x 4 mm - - stainless steel pipe of 20 - 50 x 3 mm - max. resistance moment 6.2 cm - max bending angle 180° - max radius 125 mm - Bending speed 8 sec - Drive 400 V / 3 kW - Space requirement approx. L 2400 x H 1600 x D 1000 mm - Weight approx. 1400 kg - with: - Bending angle control via potentiometer with digital display - 6-fold bending angle preselection - Indoor + external pipe deburrer - Bending tools Rx2.5D x 38 ; • 50 , 65 ;
used
Reducer Concentric AGRU/TRACEABILITY 250/160 SDR 1
new
Reducer Concentric AGRU/TRACEABILITY 90/75 SDR17
used
Specifications: - Bending performance - Pipe at 45 kg / mm² Ø 6 - 48 mm - Solid material up to approx. 30 mm - bending angle 180 ° - Bending radius 2 x D - Drive 400 V / 1.5 kW - Space requirement approx. W 4500 x H 1400 x D 1000 mm - Weight approx. 600 kg - with - Digital bending angle display + bending angle fine adjustment - Mandrel bending device 4.5 m. with hydr. Retreat - Bending tools 16 , 25 , 20 , 33.7, 38 mm - Bending blade 3000 mm
used
Roll Forming Line 9-Stand Stud & Track
used
Power supply unit, DIN rail -Type: TCL024-112 -Weight: 0.3 kg
used
Power supply unit, DIN rail -Type: TSP 360-124 -Weight: 1.4 kg
used
Power supply unit, DIN rail -Type: TSP 180-148 -Weight: 0.7 kg
used
Power supply unit, DIN rail -Type: TSP 180-124 -Weight: 0.7 kg
used
- Working range pipe Ø 4 - 28 mm x 3 mm for steel - Working range pipe Ø 4 - 35 mm x 2 mm for non-ferrous metals - Pipe sliding length 3,000 mm - Electronic single-axis control / angle input - Bending radius max. 90 mm - Minimum quantities - Mandrel lubrication - incl. existing tools ( 17.2 x 2 / 21.3 x 2 / 25.0 x 2 / 26.9 x 3 mm ) - Weight approx. 600 kg - L x W x H approx. 3,800 x 600 x 1,100 mm - Incl. operating instructions and spare parts list
used
- Pipe diameter max. 76.1 mm - Pipe sliding length max. 4,500 mm - bending radius 200 mm - Bending direction right - electronic 1-axis control - Twist angle unit with stops - electronic display of rotation - electronic display of the longitudinal position - Mandrel lubrication man. - L x W x H approx. 5,700 x 850 x 1,150 mm - Weight approx. 1,700 kg
used
Tube range up to: 48,3x3,25mm (E235mitRm =2xD) Bending radius up to: 125 mm Control: electronic ( + known 4-fold bending angle preselection ) Bending angle maximum: 180° Bending speed: 20°/s Dimensions L / W / H: 2380 / 800 / 1250 mm Weight: approx. 650 kg Electr. Power: 2.4 kW incl. sawing unit with visualization of the saw position via line laser Deburring unit, drive unit for assembly attachments Tube positioning - length and twisting 2-axis positioning indicator, premature mandrel retraction Auto. Mandrel lubrication (minimum quantities) Interface for network connection and data import
used
Max. pipe diameter: 42mm.
used
There are five identical machines available, an inspection is possible.
used
Max. bending diameter: 30mm, an inspection is possible.
used
Work basket, Work platform, Work platform used Manufacturer: TRACTEL / GREIFZUG Type C5 1L Aluminum basket Load capacity 240 kg with electric cable winch TIRAK X 520 P Load capacity 500 kg for 9 mm rope Rope speed. 9 m/min Blocstop Safety gear BSO 520 500 kg 4x TRACTEL ropes 9 mm 180 m 1 rope drum is damaged Total dimensions approx. 2400 x 800 x 1400 mm Subject to changes and errors in the technical data, specifications and prices as well as prior sale.
used
- Working range pipe Ø 20 to 60.3 mm (wall thickness 2.3 mm / mild steel) - Preselection 4 bending angles by rotary control - Bending, deburring - Pipe extension length 4,500 mm - Rotation angle unit manual - Spine retreat
used
Power supply unit, DIN rail -360 W, 24 V/1 5 A -Power supply output type: Fixed/Adjustable -AC input voltage: 85 V to 132 V, 187 V to 264 V. -Number of output channels: 1 -Nominal output voltage: 24 V -Output current max.: 15 A -Power output max.: 360 W -SVHC: No SVHC (19-Dec-2012) -Areas of application: Industrial -External width: 80 mm -Width: 80 mm -Input voltage change: 0.5 % -Frequency input-: 63 Hz -Frequency supply max.: 63 Hz -Power supply unit -Frequency supply min.: 47 Hz -Weight: 1.1 kg -Height: 125 mm -Load change: 0.5 % -Length: 125 mm -Length outside-: 125 mm -Mounting: DIN rail -Rated power: 360 W -Voltage output: 24 V -Voltage output max.: 28 V -Voltage output min.: 24 V -Current output: 15 A -Power supply type: switch mode -Depth outside: 125 mm -Supply voltage: 264 V -Supply voltage max.: 264 V -Supply voltage min.: 85 V
used
Tubebending machine for tube: dia 6 gt; 48 mm for full material: max 30 mm Max dia tube x thickness: Ø 6 > 48 mm (45 kg / mm²) Max bendingradius: 180° Length: 5500 mm Depth: 1400 mm Height: 1000 mm Weight: 600 kg
used
Power supply unit, converter, power supply, switching power supply -Type: EXI-05030 -Input: 170 - 264 VAC/2.5 A -Output: 5 VDC/30 A -Dimensions: 195/95/H60 mm -Weight: 0.9 kg
used
used
- Working range pipe max. Ø 6 – 50 mm - Pipe extension length 3,000 mm - Electronic three-axis control - Incl. existing bending tool D20xR40/D40xR80/D40xR120/ D50xR110 - incl. prev. Mandrels 20x2 / 20x1 / 40x2 / 50x2 - Weight approx. 750 kg - L x W x H approx. 3,800 x 700 x 1,500 mm - Incl. instruction manual as PDF
used
Manufacturer: Tracto-Technik Type: Tubotron 50 Working range: Diameter 6 - 50 mm Pipe push-on length: 3000 mm Control: 3-axis electronic control Propulsion: Electro-hydraulic drive 3 kW Weight: 710 kg Dimensions (L x W x H): 3720 mm x 680 mm x 1495 mm
used
used
Working range tube Ø 4 - 28 mm x 3 mm for steel Working range pipe Ø 4 - 35 mm x 2 mm for non-ferrous metals Pipe push-on length 3,000 mm Electronic single-axis control / angle input Bending radius max. 90 mm Minimum quantities - mandrel lubrication incl. existing tool ( 17.2 x 2 / 21.3 x 2 / 25.0 x 2 / 26.9 x 3 mm ) Weight approx. 600 kg L x W x H approx. 3,800 x 600 x 1,100 mm
used
Description: Device is in like new condition see pictures' Approx. Onsite Dimension. (l x w x h): 1,200 x 1,000 x 1,600 mm, weight approx.: 280 kg
used
Description: Device is in like new condition see pictures' Approx. Onsite Dimension. (l x w x h): 1,300 x 1,100 x 1,700 mm, weight approx.: 250 kg
used
Description: Device is in like new condition see pictures' Approx. Onsite Dimension. (l x w x h): 1,300 x 800 x 2,100 mm, weight approx.: 250 kg
used
Description: Device is in like new condition see pictures' Approx. Onsite Dimension. (l x w x h): 1,500 x 1,400 x 1,800 mm, weight approx.: 280 kg
used
Description: Device is in like new condition see pictures' Approx. Onsite Dimension. (l x w x h): 1,400 x 1,300 x 1,950 mm, weight approx.: 240 kg
used
Description: Device is in like new condition see pictures' Approx. Onsite Dimension. (l x w x h): 1,600 x 1,300 x 1,700 mm, weight approx.: 280 kg
used
Description: Device is in like new condition see pictures' Approx. Onsite Dimension. (l x w x h): 1,250 x 1,400 x 1,700 mm, weight approx.: 260 kg
used
Description: Device is in like new condition see pictures' Approx. Onsite Dimension. (l x w x h): 1,400 x 900 x 1,600 mm, weight approx.: 300 kg
used
Description: Device is in like new condition see pictures' Approx. Onsite Dimension. (l x w x h): 1,300 x 900 x 2,000 mm, weight approx.: 265 kg
used
C-track conveyors mobile elevating belt, serial number: 11839, year of construction: 03/2023, plastic belt with dividers, belt width: 600 mm, distance between dividers: 400 mm, divider height: 40 mm, elevating height: 2350 mm, total dimensions: 2400 mm x 1225 mm x 2430 mm.
used
as good as new; very little used Towing capacity: 0.8 t Transport length: 0.64 m Transport height: 0.6 m Weight: 0.8 t Battery capacity: 24/34 V/Ah Series: W Tyres: 2x/2 Transport width: 0.48 m Drive power: 0.5 kW Battery weight: 0.068 t Travel speed with/without load: 3.5/4.5 km/h
used
Technical data: 2 axle, block design with integrated cab, Incl. working crane HIAB 125, type 1252 Weight: 10.040 kg maximum permissible load: 960 kg maximum permissible total weight: 11,000 kg Support load: 1,800 kg Type speed: 40 km/h Machine dimensions length x width x height: 5800 x 2500 x 3700 mm
used
Pallets chain segment with duplex chain for transverse with SEW drive 4 lines L 3000 3 pallet transverse 3250,- 4 lines L 2100 2 pallet transverse 3050,- 4 lines L 1300 for 1 pallet transverse 2850,- 3 lane L 3000 3 pallet transverse 2960,- 3 lane L 2100 2 pallet transverse 2760,- 3 lane L 1300 for 1 pallet transverse 2560,- Altitude 600 mm +/-100 mm Base in painted version, V SQM A version for an additional fee
used
Various secure retirements for Canalis KS25 tracks, some with CEE and Sockets, partly for cable connection. Outlets with outlet fuses with machines or screw locks. Compl. Wired and ready for use. Finish request please inform. Questions to Manfred Raupp 0170 / 2204056 Mail to: fa.raupp@t-online
used
Compact tractor with selectable four-wheel drive, infinitely variable hydrostatic travel drive, Diffentialsperre, 3-cyl.-Kubota diesel engine, 15 kw/20 HP EZ 5/95, only about 350 hours of operation, cabin, heating, power steering, turf tyres, Front hitch, front PTO, 2 x hydraulic connections front. Rear three point linkage, rear PTO 540/1,000 rpm. Complete with vehicle and good battery! Needs service, otherwise good machine. Price ex. export € 7.900 / / in Germany plus 19% VAT price € 9.401,- Equipment optional at extra charge available, E.g. snow blade, broom, centrifugal spreader roller spreader. We supply used winter maintenance technology - Holzhäcksler - engines and more - see photos!
new
QUASAR 50 kN is a product after the latest developments, designed and built to highest standards of quality and equipped with most advanced techniques. The test programs can be created with a degree of freedom not known otherwise for material testing machines according to own requirements and serve the control (speed, strength, stress, deformation, elongation Le|L0, strain LC|LV, manual movement, cyclical) of the machine as well as the evaluation and logging of test results. The software is a complete software for all typically obtained from static universal testing machines tensile, pressure, bending and cycle tests according to national and international standards. Even after the purchase you will not come in the fix to have to buy another software module: using the integrated 600 predefined results the formula editor or a calculation relocated to the Excel is pre-configured "chec ...
used
The quasar 100 kN is a product after the latest developments, designed and built to highest standards of quality and equipped with most advanced techniques. The test programs can be created with a degree of freedom not known otherwise for material testing machines according to own requirements and serve the control (speed, strength, stress, deformation, elongation Le ·) L0, strain LC | LV, manual movement, cyclical) of the machine as well as the evaluation and logging of test results. The software is a complete software for all typically obtained from static universal testing machines tensile, pressure, bending and cycle tests according to national and international standards. Even after the purchase you will not come in the fix to have to buy another software module: using the integrated 600 predefined results the formula editor or a calculation relocated to the Excel is pre-confi ...
used
Properties < b >: < / b > Used Roller converter of manufacturer Overbeck Feet to be ordered separately Condition: fully functional with traces of use Ideal for the fast material handling Expertly disassembled and packed Interroll motor roller v-belt drive maximum width 68cm packages that can be implemented to converter < b > < /b > Converter with chains or straps gently raise the goods and settle it gently on the goal line. This includes both routes leave during recording and weaning shortly. Technical data < b >: < / b > Mass of the roller length: 2000 mm Total width: 600 mm Segment length: 750 mm the role < /b > details < b > Clamping length: 450 mm Diameter approx: 50mm Length: 100mm Material: Steel, galvanised the framework < /b > details < b > Frame height: 135mm Frame width: 30mm Ma ...
used
Pallet fork (fork length 1000 mm) with carriage / ballast weight three-point hitch
new
Do not buy a used tractor tester 100 kN or smaller: In almost all cases, the electronics for WIN 7 or 10 need to be completely modernized. For the purchase of the used universal testing machines, pick-up, refurbishment and their retrofit, you will receive a new machine (!) from GALDABINI from us Quasar 10 kN latest technology (BECKHOFF electronics) with first-class software LabTest. Suitable for tensile tests, pressure tests, bending tests and cyclic tests stable 2-acid universal test machine constructed using finite elements FEM Available load cells: 10 N | 20 N | 50 N | 100 N | 250 N | 500 N | 1 kN | 2.5 kN | 5 kN | 10 kN for tests on plastics, rubber, foils, textiles, components, assemblies and much more Very well Made in Italy | Europe, e.g. with German + European quality components + assemblies ergonomic design, flexible, future-oriented design Extreme signal resol ...
new
QUASAR 1200 kN tractor / universal testing machine This is the replacement for an outdated, uneconomical hydraulic tractor testing machine / universal testing machine. Concerns when purchasing a used (hydraulic) universal test machine that will almost certainly be modernized with new electronics for WIN 7 or 10. In addition, used machines often have other (hidden) defects, such as a knocked-out central spindle of the lower clamping head. Quasar 1200 kN with the latest technology (BECKHOFF electronics) with first-class software LabTest. Suitable for tensile tests, pressure tests, bending tests and cyclic tests stable 2-acid universal test machine designed by finite elements FEM for tests on steel, reinforced steel, screws, wire ropes and much more Very well Made in Italy | Europe, e.g. with German + European quality components + assemblies ergonomic design, flexible, fut ...
used
Serialization system for packaging line: suitable for the printing of code data on the cartons. Incl. camera vision system, bad ejection and data management system etc.