tp used for sale

For sale here is a 3D printer from the BigRep brand Studio G1. This machine is a showroom unit and will be serviced by a specialist dealer before delivery. The software comes from the manufacturer BigRep, which is closely based on the well-known Cura., operating hours: few, Installation: 2017, Installation space in mm (x/y/z): 1000x500x500, software: BigRep Blade, network connection: USB / Network, support material: Compatible with all popular 3rd party filaments , Layer thickness: 0.1mm 0.4mm, number of nozzles: 2, extruder units: Fiber-Ready Dual Extruder, Print bed temperature in °Celsius: Max. 100°C, Weight in kg: about 600KG, Power supply: 208V - 240V, 16A, 50/60Hz, security certification: CE approval, building material: BigRep ASA, BigRep ABS, BigRep BVOH, BigRep HI-TEMP, BigRep HI-TEMP CF, BigRep PA6/66, BigRep PETG, BigRep PLA, BigRep PLX, BigRep PRO HT, BigRep TPU 98A Comp ...

Year of issue: 2006 Length of injection molding machine, mm: 6900 Width of injection molding machine, mm: 1700 TPA height, mm: 2500 Clamping force, tons: 320 Weight, t: 12 Screw diameter, mm: 55 Injection volume, cm³: 1026 Productivity kg / hour (РС): 187 Drive, kW: 37 Heating, kW: 18.5 Slab size, mm: 1000 Slab size, mm: 1000 Between columns, mm: 660 Between columns, mm: 660 Fastening of clamps VNUTR cont., Mm: 280 Fastening of clamps VNESHN. cont., mm: 350 KRM plate travel, mm: 670 Package height min, mm: 240 Package height max, mm: 680 Full disclosure KRM, mm: 1350 D of the landing ring fixed plate, mm: 160 D of the landing ring movable plate, mm: 100 Pusher stroke, mm: 160 Hydraulic oil grade: 46 Oil volume, lit .: 620 Oil change, hour: 9000

Hereby 2 a material stand are offered for sale. The price is per piece. The item is in a used condition but works perfectly. specifications: - Load capacity: 150kg - Platform width: 150mm - Platform depth: 410mm - Height: 520 - 800mm - Tilt capability: 15° , 30° -Roll material: thermoplastic elastomer (TPE)

Colchester VS 2500 CAPACITY Swing over bed 400mm 15.7″ Swing over cross slide 246mm 9.6″ Height of centres 195mm 7.7″ Swing in gap 585mm 23″ Gap width from faceplate 165mm 6.5″ Bed length 1270mm 50″ Distance between centres 1270mm 30″ SPINDLE Spindle nose D1 – 6 Camlock Taper in spindle nose bush No 4 MT Spindle bore 54mm 2.1″ Maximum spindle speed 2500 rpm 2500 rpm Spindle speed ranges Low 14 – 300 rpm Medium 36 – 830 rpm High 109 – 2500 rpm Maximum spindle motor power 7.5kW 10 HP Number of Imperial Pitches 56 Range of Imperial Pitches 2 – 56 TPI Number of Diametral Pitches 20 Range of Diametral Pitches 8 – 56 DP Number of Metric Pitches 51 Range of Metric Pitches 0.2 – 14mm Pitch Number of Module Pitches 20 Range of Module Pitches 0.2 – 3.5 MOD

Capacity Swing over bed 400mm 15.7″ Swing over cross slide 246mm 9.6″ Height of centres 195mm 7.7″ Swing in gap 585mm 23″ Gap width from faceplate 165mm 6.5″ Bed length 1270mm 50″ Distance between centres 1270mm 50″ Spindle Spindle nose D1 – 6 Camlock D1 – 6 Camlock Taper in spindle nose bush No 4 MT No 4 MT Spindle bore 54mm 2.1″ Maximum spindle speed 2500 rpm 2500 rpm Spindle speed ranges Low 14 – 300 rpm 14 – 300 rpm Medium 36 – 830 rpm 36 – 830 rpm High 109 – 2500 rpm 109 – 2500 rpm Maximum spindle motor power 7.5kW 10 HP Number of Imperial Pitches 56 56 Range of Imperial Pitches 2 – 56 TPI 2 – 56 TPI Number of Diametral Pitches 20 20 Range of Diametral Pitches 8 – 56 DP 8 – 56 DP Number of Metric Pitches 51 51 Range of Metric Pitches 0.2 – 14mm Pitch 0.2 – 14mm Pitch Number of Module Pitches 20 ...

Height of centers : 400 mm Swing over bed : 890 mm Swing over cross slide : 490 mm Swing in gap : 1050 mm Width of bed : 700 mm Distance between centers : 1500 mm Spindle nose DIN 55027 : No. 15 Spindle bore : 155 mm Spindle taper : 160 Metric Number of spindle speeds : 24 Spindle speed ranges : 6,3 - 1250 Main motor power : 22 (30) kW Number of feeds : 160 Longitudinal feed range : 0,032 - 38,9 mm/rev Cross feed range : 0,016 - 19,45 mm/rev Number of threads : 80 (of each type) Metric thread range : 0,5 - 480 mm Inch thread range : 60 - 1/16 Tpi Module thread range : 0,125 - 120 Module DP thread range : 240 - 1/4 DP Cross slide travel : 525 mm Top slide travel : 270 mm Quill diameter : 125 mm Quill taper : No. 6 Morse Quill travel : 260 mm For DBC 3000 mm : 7500 kg

Used capping machine Clean Pack up to 2500 bph Machine Specifications Firstly the CLEAN PACK brand capper features a single head configuration specifically designed for applying T caps Importantly this technical choice allows for precise cap placement which is essential for ensuring the integrity of the bottled product Moreover the cap distribution system operates through vibration mechanisms an effective method for sorting and feeding caps to the capping device without interruptions Speed Adjustment of the Used capping machine Clean Pack up to 2500 bph Secondly the production speed of the capper is adjustable via an inverter This allows fine control of the capping rate tailored to the desired production rhythm Consequently this adjustment capability proves particularly useful in dynamic production environments where requirements can quickly change Configuration and Safety Additionally t ...

Used Capping Machine Bertolaso Sigma 603 up to 4500 bph Firstly the used Bertolaso Sigma 603 capping machine is a technologically advanced solution It ensures high performance up to 4500 bottles per hour Designed for maximum efficiency in the capping process it integrates seamlessly into production lines Indeed its versatility and reliability are unparalleled Technical Features of the Capping Machine Bertolaso Sigma 603 Specifically the Capping Machine Bertolaso Sigma 603 model features three heads for aluminum screws These are configured for caps measuring 31 5 mm by 44 mm Furthermore a centrifugal cap distributor ensures constant and precise cap feeding Consequently it optimizes the capping process eliminating interruptions Moreover mobile capping heads and a manually adjustable height capping head offer great flexibility They easily adapt to different bottle and cap types Additionally ...

Machine in good technical condition, testing possible upon agreement. Capacity: 320 t Stroke: 320 mm Oil. Filling: 250 l Width: 1750 mm Length: 4700 mm Height: 3200 mm Weight: 1650 kg Tools / Equipment: BIU - 033 (515mm) – 5 pcs BUI - 031 (715mm) – 1pc TPR. 256. 60. R4/R3 (500mm) – 3 pcs TPR. 256. 28. R1/FB 4050 – 4600mm – 1Pc UKB 15.320 (500mm) – 1pc Radius adapter (335mm) – 3 pcs Pressing bottom (1000mm) – 1 PC

This is a FETRA transport ironing trolley for sale. Although the item is visibly used, it works perfectly. Specifications - Load capacity: 400 kg - Weight: 26 kg - Tyres: TPE - Wheel size: 160 x 40 mm Metrics - Loading area size: 85 cm - Loading area width: 50 cm - Loading area height: 26.5 cm - Total length: 104.5 cm - Total width: 64.3 cm - Total height: 95.9 cm -

Inv. Num. : 7402 Type: Euroμ Producer: Mora Created: 2015 Parameters: Software: Metrosoft Quartis Geo Axis X: 600 mm Axis Y: 1000 mm Z axis: 400 mm Number of axles: 3 Equipment: Computer Control panel Renishaw PH10M motorized turret Renishaw PH10M Measuring Probe Renishaw TP200 Probe 2019: Overhaul of the drives

MAZAK MULTIPLEX 6100Y CNC turning center which was built in 2001 in Japan can fully automate the machining of workpieces with a maximum diameter of 500 mm, while maintaining high accuracy and precision. Turning takes place inside a large work space equipped with a rigid bed and a chip conveyor integrated into the coolant chute, designed to continuously evacuate the cuttings from the work area. In the machining process, the MAZAK CNC dual-spindle lathe uses tools housed in 12-position turret heads, distinguished by their reliable operation. Each of the two tool heads is 3-axis (X,Y,Z) and supports driven tools. In addition, to simplify and streamline turning, the workpiece can be machined on both spindles simultaneously and in link” mode, holding the bar in both chucks. The MAZAK ML TPLX 6100Y automatic lathe is also offered with a wide range of equipment, including the LNS QUICK  ...

Holtrop Jansma Extraction with Kontainer Chip Disposal Type: MSK350S Year of construction: 1998 Type: overpressure filter system Intake manifolds: ø350 mm Capacity: 8,000 m3/hour Year of construction: 1998 Filter surface: 46 m2 Fan: ETD 350, 7.5 KW/1.500 tpm Star wheel chip disposal: 800 mm - Pressureless Chip disposal fan: EMD-200, 4 KW-300tpm, 45m3/uur Explosion Pressure Release: Doors serve as a pressure release in the event of an explosion Pressure Measurement: Pressure Dial Gauge Cleaning: 0.13 KW/1500 KW vibrating motor Air recovery: 500500 mm with built-in flame protection damper Dimensions: 3,3503,0001,200 mm Scope of delivery: filter system with intake fan Fan, transport fan, control cabinet, air recovery with built-in flame protection flap

Lot Composed of various machinery for the processing of plastic and wooden components for eyewear. n.1 Ventilation System with extractor and filters: Used for the extraction of fumes generated by the combustion of PVC materials in ovens. n.1 Cielle CNC machine: Used for milling and cutting wooden components for glasses. Brand Cielle Model ALFA 61X6, Year 2011, S/N 24/11 WEIGHT 250kg VOLT 220/240 POWER 1800W n.1 Double action oven: Used for firing PVC material (Working temperatures up to about 300 degrees Celsius, 4 pieces. n.1 Green Box Chiller for closed-loop cooling of machinery. n.1 Press and Dehumidifier (5 pieces) : o Press: Used to cut labels that were then printed on the fabric. o Dehumidifier: Used to dehumidify TPU material into granules. o 1 Laser : Used for laser cutting organic material, also used for cutting fabric (textile). Can also be used for engraving. o n ...

Holtrop Jansma-AFS clean air extraction with compressed air cleaning, auger discharge, rotary lock, chip fan, return air with summer/winter gate valve and fire protection device Type: OSFS 185 Year of construction: 2005 (2015 new turnstile and new control system) Clean air extraction Suction supports: ø700 mm + ø700 mm Length: 3,500 mm Width: 2,300 mm Height: 6,200 mm (onderbak 2,700 mm + bovenbak 2,700 mm + 800 mm fans) Capacity: 21,000 m3 /hour Chip fans: 2 15 kW, 380V, 56 Amp, 10,500 m3/uur, 3,000 tpm, 3,850 Pa, Type: RL E 550130 Filter surface: 185 m2 Filter tubes: 150 stuks Length of filter tubes: 2,200 mm Diameter of filter tubes: 180 mm Cleaning: Compressed air cleaning Flame protection: Sprinkler installation with fire brigade connection Screw: HJ STH-380 12 tpm Turnlock: HJ ZRS-300, 31 tpm Hopper dimensions: 250350 mm Transport fan: Connection diamet ...

Brand: Akros Henschel, Model: CIC 1100-1400 14L, Technical data:, Shearing force of up to: 1100 t, Cutting width of: 1400 mm, Clamping force of up to: 350 t, Side compression force of up to: 540 t, Installed power of up to: 550kW, Output of up to: 57 tph, Year of construction: 2011, Warranty: none, Excluded: Hydraulic oil Foundations, Electrical connections, Cranes for handling welding equipment, and welders, The machine is disassembled and immediately available., fire: Akros Henschel, model: CIC 1100-1400 14L, Cutting width of: 1400 mm, Output of up to: 57 tph, Year of construction: 2011, Warranty: none, Excluded: Hydraulic oil foundations

: gebraucht : 2015 : 1686 : ca. 2 Wochen ab Auftragse : 22800 € : 1 : 330 mm : 1000 mm : 167 mm : 38 mm : 210 mm : 12 : 40 - 2500 1/min : 16 : 0.03 - 1 mm/U : 0.2 - 14 mm : 2 - 56 TPI Gänge/ : 190 mm : 92 mm : 42 mm : 3 MK : 110 mm : 2,2 kW : 1900 mm : 1000 mm : 1550 mm : 685 kg 3-axis digital read out Newall 4-jaw chuck Bison diameter 160mm with inside and outside jaws Quick-change tool post with 1 hold Coolant device Chuck protection Steel holder protection Lead screw cover Machine light Manual brake Operating manual in German with EC declaration of conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mitutoyo Crysta Plus M443 Handheld Coordinate Measuring Machine Measuring range: X: 400mm Y: 400mm Z: 300mm Very good condition and regular factory calibration. Last factory calibration: 09/2021 The machine was always in an air-conditioned measuring room. Equipment: Temperature Compensation Renishaw MH20i Swivel Head 2 TP20 STD Force pushbutton mounts Several ruby buttons with ball diameters of 1, 2, and 4mm, as well as different lengths and extensions. Calibration ball With PC and software MCOSMOS from Mitutoyo.

Seize the opportunity to own a nearly new Domino D620i CO2 Laser at a significant discount. Originally acquired for a project that was discontinued, this laser has only been run once and is in excellent condition. Ideal for businesses looking to enhance their production capabilities with minimal investment. Condition: Like new – ran only once for testing in a project that was not continued. Inclunding: Domino DPX1000 suction system, 230V, 6m suction hose, all substrates except PVC, incl. user manual electronic Touch Panel 10.4" for D-, F-series, requires X59 communication cable (old TP2) Rotary encoder IP66 for Ax, D, F and U series, with coupling, 10mm shaft, 10m connection cable, cable plug and mounting bracket Maintenance unit for IP65 laser, with air filter, control valve, solenoid switch, 5m cable, 12m compressed air hose, inlet 10mm (customer side), outlet 12mm (to lase ...

Description: Welding cell unit composed by: , Robot KUKA , Type: KR30L6-2 Article Number: 10022094 Serial  ,Number: 709149 YOM: 2017 weight: 700 kg , Load capacity: 16kg Working Range : 3102 mm Controller and pendant Type: KR C4 Serial Number: 331262 , Rotating table VP3-V2H500, the bed is not included Número de serie: 152218 Año fabricacion: 2017 FRONIUS TPS welding machine Serial Number: 28185845 Model_ TPS 400ipulse , YOM: 2017 Power: 1.4kw Security fences Approx. Onsite Dimension. (l x w x h): 4,000 x 2,400 x 2,520 mm, weight approx.: 6,000 kg

Description: Attention: small breakage (see pictures) Load capacity: 2 kg, Year of construction: 06/2015, Scope of delivery: Robot, Stäubli CS8C-TS40, Epson control panel TP1, Rittal air/water heat exchanger SK 3212230 Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,300 mm, weight approx.: 146 kg

We are selling a Stratasys F370 on behalf of a customer. Maintenance contract was active until 04/2023. The machine is in very good working condition and comes with many accessories., Stratasys F370 Accessories:, - 9 Build Trays, - 1 role QSR Support, - 1 roll ABS black, - 8 printheads (2 installed), - 4x lye powder for washing out the support material, - last electrical safety test in 10/2023, network connection: LAN (Ethernet), WiFi, software: GrabCad Print (Download), Insight Software License, Installation space (x,y,z): 355 x 254 x 355, operating system: Windows 7, Windows 8, Windows 8.1, Windows 10 (64 bit only), Windows 11 at least 4 GB RAM, building material: ABS-CF10, ABS-ESD7™, ABS-M30, ASA, Diran™ 410MF07, PC-ABS, PLA, QSR Support, TPU-92A, Printing features: Replaceable extruder, heated build chamber, closed build space, two extruders (model & support), printing tech ...

Description: • Throughfeed CNC drilling machine, CNC boring machine • Serial number 6086 • Total installed power approx. 16 KW • Maximum workpiece size approx. 3000 x 800 x 35 mm • Minimum workpiece size approx. 280 x 110 x 15 mm • Drilling head vertical X-axis: 7 • Drilling head vertical Y-axis: 7 • Drilling head horizontal X-axis: 1 + 1 • Drilling head horizontal Y-axis: 1 • TPA CNC 90 control • Input roller conveyor with approx. length 1850 mm • Output roller conveyor with approx. length 1850 mm Approx. Onsite Dimension. (l x w x h): 4,500 x 1,900 x 2,000 mm, weight approx.: 2,200 kg

Used Capping Machine Bertolaso DELTA 596 7000 BPH For various types of bottles 0 75 from the light heavy and burgundy to Bordeaux type bottle The classic straight cap can be used up to 28 40 mm From the mechanical feeder the caps reach the capper through a tube that can be easily disassembled and cleaned The end of the tube is provided with micrometric adjustment which allows using all the caps having a diameter between 21 and 32 mm Thanks to this adjustment and to the Bertolaso system for the guided insertion of the caps they arrive in the best position to the compression group for a correct capping [...for more information send your inquiry to the seller.] refno: TP44

Description: Fagor digital display Turning diameter over bed: 500 mm Turning diameter over support: 300 mm Spindle bore: 72 mm Turning diameter in the offset: 700 mm Spindle speeds - infinitely variable: 20 - 2000 rpm Metric threads: 0.5 - 120 Thread - module: 0.125 - 30 mm Thread - inch: inch. Whitworth thread: 0.25 - 60 TPI Bed width: 400 mm Spindle cone: Size 8 Number of feeds: 120 mm/rev Longitudinal feeds:: 0.04 - 12 mm/rev Cross feeds: 0.02 - 6 mm Thread: 64 steps Slide path: 315 mm Top slide adjustment: 130 kW Quill diameter: 75 mm Quill taper: MTS Quill stroke: 230 mm Total power requirement: 11 kW Drehlänge: 1,000 mm, weight approx.: 2,650 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 1,300 x 1,500 mm

turning diameter over bed: 280 mm turning diameter over slide rest: 158 mm turning length: 600 mm turning speeds: 45 - 2000 U/min centre height: 140 mm spindle bore: 26 mm tailstock quill taper MT: 2 tailstock quill stroke: 60 mm metric threading: 0,25 - 2,5 mm thread - inch: 6 - 96 TPI connected load frequency: 230 V total power requirement: 0,75 kW weight of the machine ca.: 0,16 t dimensions of the machine ca.: 1,26 x 0,58 x 0,60 m Professional metal lathe, gearing machine - 3-jaw chuck - 4-jaw chuck - hardened bed tracks - Clamping plate - 4-way chisel holder - Feed protection - standing and rotating bezel - Splash guard - Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Center height: 930 mm Center distance: 3000 mm Spindle bore: 95 mm Centre lathe POREBA - TPK 90 A1 / 3  2 axis digital readout 3 chuck 630 mm 4 chuck 800 mm Rapid feed all directions 3 x Steady rest DBC Turning Length:      3000mm Swing over bed Ø:        930mm Swing over cross slide Ø:620mm Spindle bore:            95mm Spindle power:           22kW Bed width:               585mm Tailstock spindle Ø:     6Ø Stroke pinole:           200mm Spindle taper:           6Mk Speeds / ranges:         800Rpm Feed rate X-Axis:        2000mm/min. Feed rate Z-Axis:        2000mm/min. Workpiece loa ...

Milk powder mixing line, consisting of: IBC big bag silo system with Abus hoist and product screw, number: 011055, year of construction: 2011, dimensions: 1750 mm x 2400 mm x 4500 mm. Product screw, dimensions product screw: 3000 mm x 350 mm x 600 mm. APV batch powder mixer, type: TPM+1, serial number: 4000787, dimensions: Ø 400 mm x 800 mm. Endress+Hauser flowmeter, type: Promass F, serial number: E4110102000, dimensions: 250 mm x 400 mm x 700 mm. 2x J.H. Stalindustri A/S s/s heated tank with agitator, year of construction: 2011, volume: 2660 liter, temperature range: 5/90 °C, dimensions: (2x) 1800 mm x 1400 mm x 3100 mm. Colly Flowtech centrifugal pump, model: CS 40-175-2-7.5/BM.CMPWH1, number: C069567, dimensions: 700 mm x 350 mm x 350 mm. Endress+Hauser flowmeter, type: Promag H, serial number: E4059119000, dimensions: 400 mm x 240 mm x 250 mm. Wilo pump, type: TOP-S25/7, seria ...

Center height: 930 mm Center distance: 12000 mm Spindle bore: 95 mm LathePOREBA - TPK 90 A1 / 12 Universal lathe 930 x 12.000 mmMACH-ID 8611 Make: POREBA Type: TPK 90 A1 / 12 Year: 1992 Accurite digital read out system 2 axis 2x Steady rest 50 - 300 mm 2x Steady rest 200 - 500 mm Feeds all directions 4 chuck 800 mm DBC Turning Length:      12000mm Swing over bed Ø:        930mm Swing over cross slide Ø:620mm Spindle bore:            95mm Bed width:               585mm Stroke pinole:           300mm Spindle taper:           6Mk Power:                   22kW Speeds / ranges:         800Rpm Workpiece load:      &nb ...

Description: Welding cell unit composed as: Robot KUKA , Type: KR30L6-2 Article Number: 10022094 Serial  ,Number: 709150 YOM: 2017 weight: 700 kg , Load capacity: 16kg Working Range : 3102 mm Controller and pendant KUKA Model: KR C4 Serial Number: 331261 Rotating table VP3-V2H500 , Serial Nubmer: 152219 YOM: 2017 FRONIUS TPS welding machine Serial Number: 28185846 YOM: 2017 Power: 1.4kw Security fences Approx. Onsite Dimension. (l x w x h): 4,000 x 2,400 x 2,520 mm, weight approx.: 6,000 kg

Description: 3D Printer ProMaker P1000X - 3D Printer by powder Laser Sintering Serial Number: 001-0010-SNO0065 Mixer for Plastic Powder Protool MXO2, Mixing Apparatus Serial Number : 001-5200SN40 Year of fabrication: 2020 MACHINE SPECIFICATIONS Power supply: 210-240 VAC 50/60 Hz – Single phase Total power: 6.5 – 7.7 KVA Power consumption: 3 KWh Maximum current: 32 A Machine electrical line: Dedicated Line circuit-breaker: 32A C curve Overall dimensions (W/D/H): 1545 x 1055 x 2125 mm Total weight: 700 kg Room temperature: 18°C to 28°C (23±3°C recommended) Air extraction: >, 3 air changes per hour Room relative humidity: 40-50%. Ceiling clearance: 0.6 m Left-side clearance: 0.6 m Rear clearance: 0.6 m Right-side clearance: 1 m - Build chamber size (LxWxH): 300 x 300 x 360 mm Build rate @0.1mm layer thickness ( Depending on material, geometry and nesting density): liters/h ...

turning diameter over bed:402 mm turning diameter over slide rest:245 mm turning length:750 mm centre height:200 mm bed width:250 mm max. workpiece weight between centres:280/300 kg :135 kg spindle bore:42 mm spindle turning speed range:40-2800 (3 Getriebestufen) U/min longitudinal feed:0,044-0,662 mm/U cross feed:0,020-0,296 mm/U metrical thread cutting:0.5 - 7,5 mm/U threading WHITWORTH:60-4 TPI range of module thread:0,25-3,75 mm :120-8 mm/min. diameter of quill:58 mm sleeve conus:4 MK quill stroke:180 mm fixed steady::Ø 10-125 (110-200 opt.) mm with live steady:Ø 10-80 mm power requirement:4 kW DRO:für 2 Achsen von FAGOR center morse:2 Stück 3 jaw chuck Ø:200 mm Brand new Center Lathe KRAFT DLZ 200 Series More information can be found in the appendix

turning diameter over bed:402 mm turning diameter over slide rest:245 mm turning length:1000 mm centre height:200 mm bed width:250 mm max. workpiece weight between centres:280/300 kg :135 kg spindle bore:42 mm spindle turning speed range:40-2800 (3 Getriebestufen) U/min longitudinal feed:0,044-0,662 mm/U cross feed:0,020-0,296 mm/U metrical thread cutting:0.5 - 7,5 mm threading WHITWORTH:60-4 TPI range of module thread:0,25-3,75 mm :120-8 mm/min. diameter of quill:58 mm sleeve conus:4 MK quill stroke:180 mm fixed steady::10-125 mm with live steady:10-80 mm power requirement:4 kW center morse:2 Stück 3 jaw chuck Ø:diverse Größen als Option Brand new Center Lathe KRAFT DLZ 200 Series More information can be found in the appendix

turning diameter over bed:502 mm turning diameter over slide rest:310 mm turning length:1500/1000 mm centre height:250 mm bed width:300 mm max. workpiece weight between centres:750 kg :225 kg spindle bore:58 mm spindle turning speed range:85-1250 (3 Getriebestufen) U/min spindle nose:A2-6 longitudinal feed:0,05-0,752 mm/U cross feed:0,022-0,296 mm/U metrical thread cutting:0.5 - 7,5 mm/U threading WHITWORTH:60-4 TPI range of module thread:0,25-3,75 mm :120-8 mm/min. diameter of quill:69 mm sleeve conus:4 MK quill stroke:200 mm power requirement:5,5 kW Machine size (LxWxH):(Spw. 1500mm) 3130x960x1550 mm machine weight:2090 kg center morse:2 Stück Brand new Center Lathe KRAFT DLZ 250 Series More information can be found in the appendix

turning diameter over bed:402 mm turning diameter over slide rest:245 mm turning length:750/1000 mm centre height:200 mm bed width:250 mm max. workpiece weight between centres:280/300 kg :135 kg spindle bore:42 mm spindle turning speed range:40-2300 (3 Getriebestufen) U/min longitudinal feed:0.05-0.752 mm/U cross feed:0.025-0.376 mm/U metrical thread cutting:0.5 - 7,5 mm/U threading WHITWORTH:60-4 TPI range of module thread:0,25-3,75 mm :120-8 mm/min. diameter of quill:58 mm sleeve conus:4 MK quill stroke:180 mm fixed steady::Ø 10-125 (110-200 opt.) mm with live steady:Ø 10-80 mm power requirement:4 kW center morse:2 Stück Brand new Center Lathe KRAFT DLZ 200 Series More information can be found in the appendix

turning diameter over bed:502 mm turning diameter over slide rest:310 mm turning length:1000/1500 mm centre height:250 mm bed width:300 mm max. workpiece weight between centres:450/750 kg :225 kg spindle bore:58 (opt. 105) mm spindle turning speed range:40-2300 (3 Getriebestufen) U/min spindle nose:A2-6 (A2-8 opt.) longitudinal feed:0,05-0,752 mm/U cross feed:0,022-0,296 mm/U metrical thread cutting:0.5 - 7,5 mm/U threading WHITWORTH:60-4 TPI range of module thread:0,25-3,75 mm :120-8 mm/min. diameter of quill:69 mm sleeve conus:4 MK quill stroke:200 mm power requirement:5,5 kW center morse:2 Stück Brand new Center Lathe KRAFT DLZ 250 Series More information can be found in the appendix

turning diameter over bed:652 mm turning diameter over slide rest:450 mm turning length:1000/1500/2000/3000 mm centre height:325 mm bed width:350 mm max. workpiece weight between centres:1125/1690/2025/2815 kg :360 kg spindle bore:85 (opt. 105/155) mm spindle turning speed range:30-1500 (3 Getriebestufen) (opt. 80-1250/50-800) U/min longitudinal feed:0,05-1,5 mm/U cross feed:0,025-0,752 mm/U metrical thread cutting:0.5 - 15 mm/U threading WHITWORTH:60-2 TPI range of module thread:0,25-7,5 mm :120-4 mm/min. diameter of quill:95 mm sleeve conus:5 MK quill stroke:220 mm fixed steady::Ø 10-180 (180-400 opt.) mm with live steady:Ø 10-140 mm power requirement:7,5 kW center morse:2 Stück Brand new Center Lathe KRAFT DLZ 325 Series More information can be found in the appendix

grinding length:2500 mm grinding width:700 mm workpiece height:730 mm grinding range:2500 x 700 mm spindle drive motor:105 kW spindle speed::50 - 3000 U/min grinding wheel width x diameter:360 x 550 mm grinding wheel peripheral speeds::50 m/sec grinding wheel hole diameter:203,2 table feed:10 - 35000 mm/min weight of the machine ca.:20,5 t dimensions of the machine ca.:11 x 4,5 x 3,4 m total power requirement:150 kVA Machine with SIEMENS 840 D CNC control for 3 axis and various grinding programms WinWop - FIBRO NC indexing table - automatic cutting force regulation (I-Konstant) - coolant device with 5000 ltr. tank complete with paperband, liquid cooler, cleaning nozzle, stream washer and automatic nozzle position adjustment - profile grinder device table mounted with diamond wheel TPR 360 - pre-profile dressing device VPG 190 - complete splash housing with doors and connector for exh ...

turning diameter over bed:400 mm turning diameter over slide rest:250 mm turning length:1000 mm max swing over gap:520 mm Height of centres:200 mm crossed path:230 mm bed width:218 mm main spindle bore:52 mm spindle size:MK 6 speeds::55-2000 U/min turning angle of tool post:90 grad tail stock:50 mm taper in tailstock:MK 4 threading metric:0,4-7 mm threading WHITWORTH:4-60 TPI total power requirement:2,2 kW dimensions of the machine ca.:1940 x 820 x 1545 mm weight of the machine ca.:750 kg tailstock quill:110 mm tapping modul:0,4-3 mm tapping diametral:8-84 Gang/Zoll

Tetra Pak filling line no. 1 Year of construction 2004 consisting of:  - Filler TBA/21 TPA500 SQ, incl. VIDEOJET 1630, year 2019 - Applicator TCAP45 incl. gluing unit NORDSON Problue 4 - Packer TCP70 incl. gluing unit NORDSON Problue 10 - Conveyor belts per line approx. 65m Tetra Pak filling line no. 2 year of construction 2003 consisting of:  - Filler TBA/21 TPA500 SQ, incl. VIDEOJET 1630, year 2016 - Aplicator TCAP45 incl. gluing unit NORDSON Problue 4 - Packer TCP70 incl. gluing unit NORDSON Problue 10 - Conveyor belts per line approx. 65m Price: per filling line (2 lines available) Each line can be sold separately.  Both lines are set up for Tetra Prisma 500ml Option at extra charge: comprehensive spare parts package customized to the machines More then 300 machines new and second hand on our seema .de

CNC processing centre Brand: Vitap Type: Galileo 2 New machine Create great things on small space - the best kind of using 5m² production space With this 3-axis machine you can drill, mill and groove in throughfeed. Vitap Bar Nesting - efficient and time saving - This patented Software processes whole corpus elements out of one longer workpiece. - Just insert the workpiece and when you take the first finished element, the machine contues with the processing of the next element Easy beginn with CNC programming: - TPA makes it easy: drillings, grooves, linear millings, form millings or the millings of letters - The CAD Software shows the processings on a virtual workpiece - Good overview about all processings on the single sides of the workpieces - Mirror function for parallel processings on other positions - Choose reference points via entering the exact position ...

Troughfeed boring machine Make: VITAP Type: ACOUSTIC For creation of acoustic panels for noise reduction Boring machine with through feed panel, boring from the bottom and automatic panel return to the operator. Three controlled axes: - X Axis - Panel movement by means of a strong pneumatic clamp - Y Axis - Boring head movement - Z Axis - Panel boring - Newly patented, high rigidity boring head movement on Y and Z axis. - Constant Side pusher: Side pusher with constant preload for perfect positioning of the panel on the machine zero point. - New frontal and more user friendly tool change system No limit in panel length High productivity and flexibility - The drilling head processes several holes at the same time - Different grids are possible also drilling grids with shift - Different drilling heads are optional available Easy TPA programming - Control: F ...

new CNC Nestingmachine, Brand: INFOTEC Type: 4621 EVO GO Technical data: Working range X axis: 2150 mm working range Y axis: 4600 mm Working range Z axis: 250 mm X / Y axes speed: 60 m/min Z axis speed: 12m/min Drill head grid 32 12 vertical spindles 8 horizontal spindles 1,7 kW System INFOTEC - EVO GO Automation of horizontal drilling in 18 mm panels (patent pending) Lateral drilling zone (requires drilling unit 12/8/2 LL) - Special unit for the C axis, which allows the transfer of the cut workpieces to the drilling zone. Can be rotated 0-90 degrees. (C-axis required) Optional: - Extension of the working area in the Y-axis up to 4600 mm. (Total length of the machine set with unloading table for EVO GO is: 9100mm). - Lateral drilling range: X: 2150 mm, Y:1300 mm Dimensions of side drilling elements: - 1600 x 600 x 18 mm - maximum, - 500 x 80 x 18 m ...

CNC boring- routering machine Brand: Vitap Type: K3 New machine Throughfeed process from the bottom and automatic panel return to the operator. Develop a new individual class: - With this machine you can do grooves and drill processings as well as different milling works, from simple edge milling to the milling of forms and letters. - There are no limits for your creativity Easy beginn with CNC programming: - TPA makes it easy: drillings, grooves, linear millings, form millings or the millings of letters - The CAD Software shows the processings on a virtual workpiece - Good overview about all processings on the single sides of the workpieces - Mirror function for parallel processings on other positions - Choose reference points via entering the exact position or just via click on the virtual workpiece Vitap Bar Nesting - efficient and time saving - This patent ...

CNC processing centre Brand: TecnoTeam Type: Enjoy Basic 3 Achsen New machine Save your space: Standing upright means progress for human! - With a vertical CNC machine you save a lot of space: Wether for consuming material or a further machine, you have more space to use in your storage. Easy machine use: - TPA makes the use very easy, you find this software at several well-known machine brands - You see the programmed processings on a virtual display, no matter which process: if circle, bow, linear millings or drillings, - Create job lists in the CAM - Forget the calculator, the machine calculates for you. - For this software several genious tips and tricks are possible. With realiability to success: - Technoteam uses High-Quality components from well-established producers. - We modify the machine exactly to your needs: If you process massive wood, you get a stro ...

CNC punching machine Brand: Vitap Type: MICRA New machine High-Performance CNC machine for the production of acoustic panels with Micro-Perforation - Every 4 seconds the punching of 1.000 up to 2.331 holes are possible (depending on the workpiece) 3 controlled axes: - X-axis: drive via 2 motors and planetary reduction gear, guidance via pinion and rack - Y-axis: drive via 1 motor and planetary reduction gear, guidance via pinion and rack - Z-axis: drive via central hydraulical unit Easy handling with TPA control - Virtual display of programmed punching holes in the CAD environment - Optimization software for the working process - LCD TFT Monitor 20 - USB port - Basic Version CAD TPA - Macro programming Processing head - 5mm grid in X- and Y-direction - Punch depth: 3mm - Changable punching tools The processing head can optionally be customized  ...

CNC drilling line Brand: Alberti Type: Syncro-Plus New machine Line with 5 controlled axes for vertical drilling from below. Options also allow grooving, milling and insertion of fittings. This Syncro line can be very well combined with the BMF series of Alberti. Autom. or manual loading with longitudinal workpiece transport Monolithic frame in welded strong steel Independent control of all axes with drilling cycle optimization 5 independet asex X1 Feed rate belt conveyor, 100 m/min X2 Control of reference stops, 55 m/min. X3 Workpiece transport control in relation to the workpiece width, 15 m/min. Y Drill head control, 45 m/min Z Machining depth control, 10 m/min Remark: Max. Workpiece dimensions: 3000x900x30mm Min. workpiece dimensions: 300x130x12mm Geometry of workpieces: Length > Width / Length = Width / Length < 20% Width. Machining head: 1 vertical  ...

CNC assembly line Brand: Alberti Type: BMF new machine Equipment for automatic insertion of fittings, plinth parts, drawer runners and many more. Can be equipped with automatic screwing devices, gluing indications and press-in tools. Plant expandable with many possible hardware feeding stations. This Alberti line can be customized according to your specifications. Machine bed made of welded steel tube structure, the upper part is made of aluminum frame. Components of the line: - Feeding - Processing zone with transport rollers - destacking Work table: - Driven PVC rollers at the inlet. Usable length: 2500mm, usable width: 840mm - Reference table with PVC rollers Usable length: 2500mm, working height: 840mm, adjustable +/- 30mm - Driven PVC rollers at the outlet Usable length: 2500mm, usable width: 840mm - Vertical workpiece clamps, autom. adjusted to wor ...

CNC drilling machine Make: Alberti Type: Vector SH New machine This CNC drilling machine machines workpieces from above with 29 spindles and has 4 controlled axes. Optionally, the Vector is available as Modulo-SH with a total of two machining heads (top with 30 spindles and bottom with 7 spindles). Machining head, working from above Manual or automatic loading and stacking with longitudinal workpiece transport Monolithic frame in welded strong steel Independent control of all axes with drilling cycle optimisation 4 independent axes X Workpiece transport along the X axis with vacuum suction cup for automatic alignment Y Machining head W Lateral pressure control Z Machining depth control Remark: Max. Workpiece dimensions: 3000x1200x50mm Min. workpiece dimensions: 300x130x12mm Geometry of workpieces: Length > Width / Length = Width / Length < 20% Width Machi ...

CNC - processing center Brand: COMEC Type: MD TOP The ideal CNC solution to process narrow and complicated work pieces EASY with COMEC processing length up to 2.000 mm Head configuration individually customizable for: - saw with 360° - axis - milling unit for horizontal and vertical processing - drilling head with separate jumping spindles vertical and horizontal - multiple spindle drilling heads separate jumping even horizontal - horizontal milling unit with 360° C - axis Special developed clamping table, moves automatically program controlled in X direction Furthermore, optionally available: - Automatic raw work piece feed with finished work piece return to the operator TPA control unit: CNC control with graphical user interface Parametric software with 3D modeling Necessary processing macros customized to you pre-installed